Encrust 0.8.0 readies a model for print in one press, by a recipe you can make your own. Check now fixes what it finds, and supports size themselves by the load they carry.
Prepare for print
- One press readies a model: orient, repair, hollow, drain, support, check and save. (#258)
- Pick a recipe:
prepare,miniatures,fix-issues, or one of your own. - Build your own recipes in Settings β Recipes, step by step, with conditions and pauses.
- A run stops where it needs you: mend by hand, then Continue or End.
- One undo takes a whole run back; Cancel stops it mid-step.
Orient and hollow
- Clean surface paints the faces that must stay clean, in Orient and Supports.
- Limit tilt, a switch under Orient's presets, caps how far a model turns.
- Keep thin parts solid: fingers, limbs and blades aren't hollowed.
- Drain's Auto finds and drills the holes that empty every pocket of resin.
Supports
- Drag a support by hand: tip, joint or trunk, and it tells you why when it can't go. (#260)
- Merge into one joins picked supports into a single tree.
- Tips sized by what they carry: light under a wide base, heavier under a heavy part.
- Overloaded tips get stronger or gain a neighbour on their own.
- A support with no room turns its head or steps aside first, and says why if it can't.
- Grow them again rebuilds the group in hand.
Check
- Issues laid out as cards: step through them with arrows, or Fix all at once. (#259)
- Suction cups get a vent, weak necks get just enough supports.
- Fix the plate: models in the way move clear, and a long one turns to fit.
- A quick check runs in the background, so the dot shows before you open Check.
Around the window
- Measure along a surface, and from a point on a support.
- Zoom towards the cursor to reach a small model beside a big one.
- File β Send a sliced file sends a file you sliced earlier to your printer.
- Printer previews now look like your view, and survive a convert. (#257)
- Opening a sliced file shows its progress and can be cancelled.
- Opening a project over unsaved work asks before it lets it go.
- Move and Rotate in local axes step from where the model stands.
- Your printer edits keep only what you changed; the rest follows each release.
- The browser build shows its progress, updates on reload and runs in Safari 26.
- On the command line:
--prepare,--recipe,encrust recipes,--merge-supportsandinfo --thumbnail. - Plus fresher scene colours and tidier layout in a split or narrow window.
π Fixed
- Print time now counts the lift under a model.
- Creality
.cxdlpv4files are written in the layer format each machine reads. - Newer Anycubic files lay out their second layer table as the printer's own do.
- Drain holes cut the raft, never a support tree, and clear supports they drill out.
- A hole clicked into a hollow model stops at the depth you set.
- Supports regrowing after a move now move with the model.
- An opened project brings back its printer.
- The machine picker names the file type each printer really gets.
- The network is scanned only once a printer is set up.
Thank you to everyone who prints with Encrust. Share your prints and your problems in our issues, we read every one.