Download Latest Version Encrust-windows-x86_64-setup.exe (21.6 MB)
Home / v0.6.0
Name Modified Size InfoDownloads / Week
Parent folder
latest.json 2026-10-29 9.5 kB
encrust-linux-x86_64.tar.gz.minisig 2026-10-29 303 Bytes
encrust-macos-aarch64.tar.gz.minisig 2026-10-29 304 Bytes
encrust-macos-x86_64.tar.gz.minisig 2026-10-29 303 Bytes
encrust-windows-x86_64.zip.minisig 2026-10-29 302 Bytes
Encrust-windows-x86_64-store.msixupload 2026-10-29 24.9 MB
Encrust-windows-x86_64-setup.exe 2026-10-29 19.5 MB
encrust-windows-x86_64.zip 2026-10-29 23.6 MB
Encrust-macos-aarch64.dmg 2026-10-29 22.7 MB
encrust-macos-aarch64.tar.gz 2026-10-29 22.4 MB
encrust-web.tar.gz 2026-10-29 9.1 MB
encrust-web.tar.gz.sha256 2026-10-29 65 Bytes
Encrust-linux-x86_64.AppImage 2026-10-29 25.9 MB
encrust-linux-x86_64.tar.gz 2026-10-29 27.2 MB
encrust_amd64.deb 2026-10-29 27.1 MB
Encrust-macos-x86_64.dmg 2026-10-29 24.3 MB
encrust-macos-x86_64.tar.gz 2026-10-29 24.0 MB
README.md 2026-10-29 7.6 kB
v0.6.0-alpha source code.tar.gz 2026-10-29 9.6 MB
v0.6.0-alpha source code.zip 2026-10-29 11.3 MB
Totals: 20 Items   271.7 MB 0

Encrust 0.6.0 repairs broken models in a tool of its own, sizes supports by what they hold, and prints on about twice as many printers. Holes now go into supports too, and the plate's card slices and sends in one place.

Repair

  • A Repair tool on the rail. It lists what is wrong with the picked models or the whole plate: holes, open edges, faces without area, faces drawn twice, loose shells and faces that cross. The rail's button carries a dot while a model is broken. (#144)
  • Click a finding to see it. It is marked on the model and the camera flies to it, round anything in the way; each click goes to the next one.
  • More ways to mend. Stitch seams where a fine patch meets a coarse one, drop tiny loose specks, close only some holes, or turn faces. Wrap a model made of overlapping parts into one surface, or run a deep repair that repairs, wraps and repairs again.
  • Fix it by hand. Brush faces to flip or delete them, bridge two open edges, or list the shells, hide one to look inside, and drop the ones you pick.
  • A model hollowed before export keeps its cavity on import and through every repair.
  • The command line repairs too, with --repair, and edits faces and shells by number.

Supports

  • Auto sizes every support by what it holds. Small islands and light overhangs get light supports, big ones medium or heavy, a shelf is sized by its resin, and gentle slopes get a few thin steadying supports so the part does not rock on the peel. Auto is where a new plate starts, and you can tune its limits. (#143)
  • Points and needles are held at their very tip, and every island Check would name is touched where it begins.
  • Only the tip touches the model, ending in a small round cap, so it leaves a clean round mark. A support with no room for its head is moved a little, or a small pillar holds the spot instead.
  • Spacing follows the angle: faces looking straight down are held closer than steep ones.
  • Neater trees. No strut runs longer than you set and no trunk carries too many tips, so a wide spread stands on several trees. Turn on Grid to stand trunks on a square grid instead.
  • Bracing presets (Standard, Strong, Tall, Small) or your own numbers, with buttresses propping tall trunks the bracing leaves free.
  • Supports inside a hollow model. Supports stand against the model as it prints, its cavity and holes included, and Support the cavity grows them inside.
  • Shift-click draws a line of supports from the last one, with dots showing where they will go.
  • Paint fill has rims: an offset from the edge, an optional second rim, and the inside on a grid, in rings or scattered.
  • One Supports card with four modes: Pick, Place, Area and Shape. Each preset is its own group, shown with its colour and count.
  • Supports look round, with smooth pillars, rounded joints and curved pads.
  • Editing support profiles in Settings shows every changed number with a button to put it back, and Reset to defaults for all of them.

Holes and hollowing

  • Drill into supports and the raft, not only the model. (#142)
  • A hole cuts only its own model and what stands under it. A model set down in another's hole prints whole.
  • Drill before hollowing and the hole stays part of the model's shape: the cavity keeps a wall around it.
  • Plugs fit exactly. A plug is the very piece the hole took out, so a hole over a tip or an edge gives that tip or edge. Plugs are numbered after their holes and placed on free room on the plate.
  • Infill takes two numbers: cell size and density. The panel shows how thick the walls come out and warns when they are too thin to print.

Printers and formats

  • About 200 printers from 24 makers, up from 100, including the Creality HALOT X1, X1 Max, X1 Neo, SKY 2025, MAGE S, PLAY and R6, PIOCREAT, PioNext, Carima, Zortrax and more. (#145)
  • New file types: .prz, .pwsz and the Photon Mono M7 line, Mono 4 Ultra and P1 Max files, the Photon Mono M5s, M5s Pro and Mono 4 files, .fdg, .phz, .photons, .cxline, .cxdlpv4 and .crmaslice. Some have not yet been tried on a printer.
  • Encrypted .ctb is written for every shipped printer that needs it, and an encrypted file can be edited.
  • Two-stage lift and retract on printers that take a second, slower stage.
  • Your printer's limits. Each resin setting takes nothing past what the machine takes, and a value past what its maker advises is framed in red.
  • HALOT buffer settings, the slow stretch near the vat and the wait after it, are part of the resin.
  • Plate inset on the Mars Pro, Mars 2 and Mars 2 Pro: the edge band the maker keeps clear is shown, and a model standing in it is marked.
  • The front is where your printer has it, for the Front mark, the opening view and the view cube.
  • Edge smoothing is now Off, Sharp, Balanced or Soft, belongs to each resin, and spreads greys over the printer's real range.
  • Converting a sliced file to another printer turns each layer if needed, so the part prints where it stood.

Profiles and settings

  • A bundled printer you added keeps only your changes, so updates bring everything else. One added in 0.5.0 or earlier is reset to the bundled profile once; your old file is kept beside it as .toml.bak.
  • A profile that no longer reads is skipped for the bundled one, and the window offers to reset it.
  • Print settings change only the plate in hand. Opening a project or adding a plate takes the printer's and resin's values again; edit those in Settings to change what every plate starts from.

Window

  • Slice and send from the plate's card. It names the printer and what it is doing. While the printer is free, one press slices and uploads with a progress bar, then the same button starts the print. Slice to a file is always there, and File > Slice all plates writes every plate.
  • The tool rail stands over the inspector, with each tool's name under its icon when there is room. Drag its edge to resize; double-click to reset.
  • Digits 1 to 9 pick the tools of the rail in order.
  • Panels remember how you left them: folded sections, open tabs, what a click places.
  • Check jumps to an issue in 3D, ringed on the cut, with the camera flying to it.
  • Before slicing, the plate's summary estimates resin and print time.

Command line

  • Pick a project's plate with --plate N, or slice them all with --all-plates.
  • Control a printer: pause, resume, stop, history, camera on or off, and picture to save the plate's photo.
  • Supports: --supports auto sizes supports as the window does, and --support-cavity holds up a hollow model's inside.
  • New slicing flags for welding, extra samples per layer and edge greys.

⚑ Faster

  • Supports and plugs are built in the background, so the window keeps answering on a dense model.
  • Repair is quicker on large models.

πŸ› Fixed

  • Resetting a shipped support profile no longer drops your own copy.
  • Holes are cut into models exactly, instead of approximately.
  • Combining and cutting a torn model patches it first, instead of refusing or rounding its edges.
  • A cut keeps the model's drain holes in both halves.
  • .fdg files are written with their header fields in the right order.
  • PNG-and-G-code .zip files write and read their print program correctly.
  • In the browser, the window's own shortcuts no longer reach the browser.
Source: README.md, updated 2026-10-29