| Name | Modified | Size | Downloads / Week |
|---|---|---|---|
| Parent folder | |||
| usb_pin_layout.jpg | 2020-08-16 | 35.2 kB | |
| DarkLight_90_schem.jpg | 2020-08-14 | 165.3 kB | |
| DarkLight_90EL_schem.jpg | 2020-08-14 | 250.6 kB | |
| Totals: 3 Items | 451.1 kB | 5 | |
============================================================================================================== DarkLight Cover/Calibrator (c) Copyright Nathan Woelfle 2020 - present day. All Rights Reserved. // This project is protected by International Copyright Law. // Permission is granted for personal and Academic/Educational use only. // Software and hardware distributed under Creative Commons Attribution-NonCommercial License // For more information, please refer to the full terms of the Creative Commons Attribution-NonCommercial 4.0 International License: // https://creativecommons.org/licenses/by-nc/4.0 ============================================================================================================== Instead of going through each folder individually, the DarkLight_90_Latest_Version.zip file contains all of the newest, important data and information needed to build your own. The zip file contains: -DarkLight ASCOM Driver -DarkLight Arduino Firmware -DarkLight Arduino Library -DarkLight Windows Application -DarkLight PDF Manual ============================================================================================================== There are currently two versions of 3D parts, which have been designed for the Takahashi FSQ-106N and the Explore Scientific ED102 Essential Series but may fit other telescopes depending on their size. The two variations will fit dew shields with an outside diameter of approximately 146.3mm and 156mm, respectively, and all files can be printed on beds up to 200 mm. FILES TO PRINT: The *_el_cover.stl file will need to be printed two times. There are 8 files to download for the FSQ-106: fsq106_cover.stl fsq106_ring.stl fsq106_el_cover.stl fsq106_container.stl fsq106_servo_arm.stl universal_servo_mounts.stl universal_back_panel.stl universal_back_panel_notched.stl There are 9 files to download for the ED102: ed102_cover.stl ed102_servo_arm.stl ed102_arm_base.stl ed102_el_cover.stl ed102_ring.stl ed102_container.stl universal_servo_mounts.stl universal_back_panel.stl universal_back_panel_notched.stl ============================================================================================================== PRINTER SETTINGS: all parts: layer height: 0.2 mm wall thickness: 0.8mm wall line count: 2 top/bottom thickness 0.8mm top layers count: 4 bottom layers count: 2 z-seam alignment: shortest infill: 20% infill pattern: cubic subdivision container, cover, ring: build plate adhesion: brim 5 line count support placement: everywhere support overhang: angle 67% support pattern: zig-zag support pattern: concentric support density: 20% el_cover: no support build plate adhesion: skirt servo_arm: build plate adhesion: skirt arm_base: no support build plate adhesion: skirt ==============================================================================================================