| Name | Modified | Size | Downloads / Week |
|---|---|---|---|
| Readme.txt | 2016-08-17 | 19.0 kB | |
| CANStream User Guide.pdf | 2016-08-17 | 22.2 MB | |
| CANStream_Setup_x64.exe | 2016-08-17 | 6.1 MB | |
| CANStream_Setup_Win32.exe | 2016-08-17 | 6.0 MB | |
| Totals: 4 Items | 34.3 MB | 0 |
For more information or assistance: cobaltsolutions.canstream@gmail.com ************************************************* ################################################# # CANStream release notes # ################################################# 08/17/2016: VERSION 2.3.0.0 [OPEN SOURCE GNU GPL] ---------------------------- New features #132: Switch to GPL Licence #135: Cycle player graph should not show not moving data Bug fixes #131: Crash on data browser re-opening #134: Cycle creator crashes at the end of cycle creation Known issues #38: Peak trace files have wrong time offset 03/06/2016: VERSION 2.2.0.0 ---------------------------- New features #11: Remove netchardir charts and use a Ctrl_GraphWindow #80: Virtual channel and virtual channels library not instantaneously taken in account #87: DLC is a frame property #99: Out of range user TX value #103: Tx frames counter removal #106: Change window layout using keyboard shortcut #107: Recent CAN Configuration sorting #108: Add 'Recent' menu item for cycles #109: Show the CAN configuration file name in the CAN Configuration window title #110: Add 'Recent' menu item for Data viewer #111: Multiplexer group deleting #115: Mode Rx Only #123: Tx Frame already sent by another bus node #125: Virtual channel function expression in a tooltip text #126: Disabled TX frames in the TX frame grid Bug fixes #9: Poor period consistency of message sending #90: Crash on negative linearization gain #93: Cycle player doubles actual cycle time #94: Crash on multiplexed signal deleting #104: No error message when CS fails to open a virtual channel library #105: Virtual channel library 'Enabled' property #112: Crash on data browser opening #113: Data viewer events info is never emptied #120: Crash on missing recent item opening #121: Crash on new bus creation while another bus is running #122: Menu strip isn't re-enabled #124: DivRem function cannot be used for virtual channels #127: Virtual channels are computed even if CAN signal does not exist #128: Virtual channels aren't visible the spy graph channel list Known issues #38: Peak trace files have wrong time offset 10/25/2015: VERSION 2.1.0.3 ---------------------------- New features #53: Add a recent CAN Config item to the main form menustrip #56: NO-RX signal value #58: Review tab order of CAN paramter definition form #59: Group multiplexed signals in the CAN configuration tree view #63: Add Frame name into frames Rx/Tx grids #67: Use collapsable grid view for Rx/Tx signals grids #69: Add the format property to the virtual channel object #70: Add the alarm property to the virtual channel object #71: Disabling a virtual channel library #75: Automatic virtual channel function argument separator setting #76: Add clarifications about arguments separator of a virtual channel function #78: Move default data Rx/Tx spliter position closer to 50% of the screen #81: Use virtual channel format and alarms properties for virtual CAN Tx parameter #85: CAN Parameter special paste #96: Show special paste window next to the cursor #97: Add a keyboard short cut for special paste #98: Change default signals warning/alarm colors #100: Set Licence object email address #101: Update Licence class constructor call Bug fixes #64: Wrong eng data display #66: CANStream closing dead lock #74: Some virtual channels disapear after a Rx data grid content reset #77: Unusable virtual channel function list #79: Help command is pointing to an imcomplete documentation #83: Crash on data viewer page renaming #84: Enum clearing infinite loop #86: Manual Tx data grid columns not resized at startup #91: Grid Data Tx reset #92: Advanced cycle creator crash Known issues 09/14/2015: VERSION 2.1.0.0 ---------------------------- New features #16: Add a message box if a trace file hasn't been converted after a conversion request #17: Filter items in all windows #18: Return to the current data folder when re-opening the data browser #22: Use current bus CAN config for record conversion #23: Show data file size with appropriate unit #24: Add the possibility to copy/paste a page in the data viewer #25: Virtual channels in data viewer #26: Make CAN signal research function into the CAN config editor #27: Disable sorting functions of the CAN frame mapping grid of the CAN config editor #30: Allow trace file deleting #33: Allow file deleting from data browser #35: Create a shortcut for data file conversion selection #36: Make CAN config editor panels resizable #40: Allow trace record conversion without stopping the current mode #42: Allow Copy/Paste of CAN frames and signals accross different CAN config #47: Automatically adjust cycle counter box size #48: Support enums for engineering signal value #49: Add CAN parameter value alarm/warning feature #50: Give a way to cancel a CAN config form closing #51: Show CAN parameter Min/Max values while editing parameter properties Bug fixes #5: Data viewer book 'Save as' windows shows the entire book file path #43: Fixed signals of a multiplexed frame aren't decoded if multiplexer isn't defined in the CAN config #45: Wrong default recording event/session #46: Refresh data browser doesn't work #52: Spy graph doesn't work anymore Known issues 01/25/2015: VERSION 2.0.0.1 ---------------------------- New features ¤Demo version: Added define #DEMO for demo version build. Bug fixes ¤Crash manual/cycle modes start without any virtual channel library loaded Known issues 12/17/2014: VERSION 2.0.0.0 ---------------------------- New features ¤Licencing system implementation ¤Licence information added into the 'About' form Bug fixes ¤Crash on attempt to load a xlsx/xls file without Excel installed Known issues 12/04/2014: VERSION 1.4.0.3 [1.5.0 pre release] ---------------------------- New features ¤Session list toolbar items of the Frm_RecordEventEdition form using icons of the ressource file Bug fixes ¤Control misalignment corrected in the cycle player control panel ¤Wrong image index for the element treeview in the Cycle_Edition form ¤Crash when multiple session are selected at the same time in the data browser (Not replicated: Code protected to avoid exception) Known issues 11/20/2014: VERSION 1.4.0.2 [1.5.0 pre release] ---------------------------- New features ¤Help file access menu added ¤Help file included in the installation script ¤AssemblyCompany changed for 'Cobalt Solutions' ¤Add virtual channel expression as tooltip text of virtual CAN signals in manual grids ¤Make a user control of the Spy 'Raw' and 'Engineering' grids and use it in the Manual and Cycle tabs ¤Layout control commands added into the 'View' menu of the main form menu strip ¤Main form public methods for CAN controller replaced by CAN controller control custom events ¤Add Raw messages list management commands in the menu strip Bug fixes ¤Text box 'Expression' of a virtual channel is not updated after a 'Set Channel' of the virtual channel test window ¤Crash on Cycle graphic plotting if the cycle is empty ¤Cycle created with the 'Cycle_Creation_Demo' config is empty (All Tx paramater within messages containing virtual CAN signal) ¤Impossible to close the application when the cycle ends ¤Crash on attempt to replay a cycle with virtual signal ¤CAN Parameter raw value is always 0x0 in the spy grid ¤Virtual channel not created if it is tested and set before the final creation (click on 'create' button) ¤Manaul Grids are empty switching Manual -> Cycle -> Manuak after having loaded a multiple controller config Known issues 11/20/2014: VERSION 1.4.0.1 [1.5.0 pre release] ---------------------------- New features ¤Finish tool bar ¤Add multiple CAN buses management in parallel ¤Open data viewer book function operational ¤Use the "User" folder to store all user objects file (DataViewerBook, DataViewerPage, Cycle, Cycle creation config, etc, etc...) ¤Move the "User" folder to the Windows user "Document folder" ¤Allow CAN configuration to support multiple CAN lines ¤Use a CAN record (trc file) to generate a cycle ¤Add the import DBC function into the CAN Configuration form ¤Use Virtual Channel/Built-in signal library name as default filename for library file ¤Default message RxTx state changed to Tx for DBC to XCC conversion ¤Default message period changed from 0 to 1000 ms for DBC to XCC conversion ¤Modify manual control message counter display mangement to have a consistant refresh period whatever messages frequencies are. ¤Add a function to cycle the multiplexer in manual mode ¤Parameter linearization change from "Engeneering to Raw" to "Raw to Engeneering" ¤CAN parameters Gain/Zero conversion rules info updated ¤Integration of 'Signed' property for CAN parameter ¤Add 'Signed' column into the manual Tx grid ¤Message encoding/decoding functions reviewed to cope with special cases where MSB and LSB paramters are interlaced (param 1: 8 bits MSB starting on bit #3 / param 2: 8 bits LSB starting on bit #4) ¤Options added to show/hide manual control / spy panels ¤Add an option showing/hidding raw/eng data panels in the Rx panel ¤Use of 'CANMessageDecoded' class in the 'CANStreamCycle' class for cycle graph series creation ¤Spy grids and graph refreshing period move from 250 to 100 ms in order to improve graph fluidity. ¤Make a function to send raw message data in the Tx manual control ¤Slight optimization of engineering message sending function (conversion from 'CANMessageEncoded' type straight to 'TPCANMsg' without intermetiade 'CANMessageData' type stage) ¤Control 'Ctrl_CS_CAN_Bus' presentation reviewed ¤Command 'Reset' added to Raw & Eng spy grids ¤Add message ID column in the Manual engineering Tx grid ¤Commands "Show All" & "Hide All" columns added to Engineering manual, Spy raw & Spy Engineering grids context menu and menustrip options ¤Grid columns auto resizing method reviewed ¤PCAN Bus diagnostics showed in the main form status strip ¤Support of CAN Configuration, virtual channels library, built-in signals library and data files in the virtual channel definition form in order to get more objects to make calculation with ¤Final merge of 'Spy' and 'Manual' controllers: both controllers are now driven using same command buttons (start/stop) ¤Added virtual CAN parameters (virtual channel used as a CAN parmater) ¤Virtual CAN parameters implemented into the 'Manual & Spy' control : Virtual channels are computed based on CAN Rx value, then their values are sent on the CAN bus as an answer ¤Virtual CAN parameters implemented into the 'Cycle' control : Virtual channels are computed based on CAN Rx value, then their values are sent on the CAN bus as an answer ¤CAN bus controller layout (panels visibility, grids columns) stored for re-use from a session to another ¤CAN bus controller layout reset command added ¤Installation wizzard added ¤CANStream files association in the Windows registry by installer ¤Function added to load the file passed as argument on CANStream file double click from Windows explorer ¤Releasing sript created and called on a successful 'Release' build ¤Use of a ressource file for icons in order to reduce the size of final exe (size ref 2866 KB / new size 1192 KB) ¤Last record event/session used by default at the application start ¤Trace files default location moved to 'My documents' to avoid crash in writing in the 'Program files' folder ¤CANStream XML files moved to '\users\xxx\AppData\Local\CANStream' folder to avoid crash in writing in the 'Program files' folder Bug fixes ¤Crash on CAN message map display: Msg 0x208 of VCAN.dbc (\CANStream\DBC Object\Samples) ¤Debug wrong message decoding when isn't starting at bit 0 of a byte ¤Crash on advanced cycle creation if message period is 0 ¤Traces in the spy graph do not use the whole graph width after a while ¤Wrong CAN parameter update after edition from the message map ¤Rx graph 'Auto scale' check box not operating ¤Virtual channel 'Comment' and 'Default Tx value' lost during library file saving/opening ¤Default session duplicated on event creation while editing the default session ¤Select event command does'nt do anything ¤Crash on attempt to write on the startup path if CANStream is installed in C:\Program Files. Known issues 10/13/2014: CANStream 1.3.0 ---------------------------- New features ¤Manual & Spy tabs merged into a single tab ¤Signal generator (sin, square, triangle, ramp, etc) added for cycle creation ¤Gain/Zero conversion rules added as an info for CAN parameters ¤Cycle graph abscisse changed for second instead of millisecond ¤Option added in the Cycle player to play indifinitevly the cycle ¤Option start/end time point added for cycle playing ¤Stop record to Stop Spy linked if automatic record active ¤CAN Configuration embedded into the cycle file to ease cycle sharing ¤Graphical CAN Message map display added ¤Spy and Manuals grid columns customizable ¤Use of virtual channel in cycle ¤New cycle creation tool having the possibility to add some data before and after the actual cycle ¤Cursor showing current time position and progression added in the cycle graphic ¤Graphical definition of cycle starting and ending points ¤PCAN Trace record graphical display added ¤PCAN Trace record feature enhanced adding recording event/session information Bug fixes ¤CSV files not readable if there is a ";" at the end of the line (like Wintax export) ¤Crash on attempt to create a cycle with a CAN Configuration containing messages not described in the cycle/data association (cda) ¤Cycle resuming after a pause ¤Crash on attempt to create a new CAN parameter without any message selected ¤Crash on CAN parameter delete ¤Impossible to change the name of the multiplixer once defined as a parameter multiplexer Known issues ¤Traces in the spy graph do not use the whole graph width after a while 05/08/2014: CANStream 1.2.0 ---------------------------- New features ¤Implementation of a check verifying PCAN device is still connected to the PC (every 5 sec) ¤"Comment" property added for CAN message & parameter ¤"Unit" property added for CAN parameter ¤Support of MSB/LSB CAN parameters ¤Support of multiplexed message ¤Vector *.dbc file support ¤Rx/Tx messages filter in the manual windows ¤Function hide/show rows in the manual & spy windows ¤Virtual channels calculation on the fly from data received in spy mode ¤Virtual channels calculation on CAN trace record conversion Bug fixes ¤Crash on CanConfiguration loading while the spy is running Known issues ¤Crash on attempt to create a new CAN parameter without any message selected ¤Crash at start up if PCANBasic.dll is not properly installed ¤Crash on CAN parameter delete ¤Can't change the name of the multiplixer once defined as a parameter multiplexer ¤Can't read csv file if there is a ";" at the end of the line (like Wintax export) ¤Traces in the spy graph do not use the whole graph width after a while 11/21/2013: CANStream 1.1.0 ---------------------------- New features ¤Added support of import data CSV file comma (,) separated ¤Added support of import data PRN file space ( ) separated ¤Added support of import data text file (*.txt) tab ( ) separated ¤Added support of import data Microsoft Excel 97 file (*.xls) ¤Added support of import data Microsoft Excel XML file (*.xlsx) ¤Creation of the "About" form containing the release information ¤PCAN Trace feature implemented ¤PCAN Trace file conversion into Wintax data ¤Cycle graphic display added ¤Bus spy with display of raw and engineering data created ¤Bgraphical display of bus spy data created ¤Extend the Cycle/Data association form to avoid the horizontal scroll bar Bug fixes ¤Crash when attempt to read a csv file already opened in another application ¤Bug on loading a new cycle while the CAN communication is already established 06/28/2013: CANStream 1.0.0 ---------------------------- Initial release
