[zd1211-devs] Siemens Gigaset USB Stick 54 (129b:1667) - not working

[David S. <mar...@ti...>]

Hallo,
  very recently I bought a Siemens Gigaset USB Stick 54, which has an
USB ID of 129b:1667.
I saw previous posts in this list mentioning a Siemens stick with the
exact same name but a different USB ID.  Those adapters were reported as
working.  Unfortunately, mine is not.  I tried adding its USB ID to
zd_usb.c, first as DEVICE_ZD1211, then as DEVICE_ZD1211B, but no joy.

I'm running a 2.6.22-rc6 vanilla kernel, and the 802.11 stack is
Intel's.  Firmware is under /lib/firmware/zd1211.

Here's the output from dmesg:

ieee80211: 802.11 data/management/control stack, git-1.1.13
ieee80211: Copyright (C) 2004-2005 Intel Corporation <jke...@li...>
zd1211rw usb_init()
usb 1-1.4: print_id() 129b:1667 v4810 high
usb 1-1.4: reset high speed USB device using ehci_hcd and address 5
PM: Removing info for No Bus:usbdev1.5_ep01
PM: Removing info for No Bus:usbdev1.5_ep82
PM: Removing info for No Bus:usbdev1.5_ep83
PM: Removing info for No Bus:usbdev1.5_ep04
PM: Adding info for No Bus:usbdev1.5_ep01
PM: Adding info for No Bus:usbdev1.5_ep82
PM: Adding info for No Bus:usbdev1.5_ep83
PM: Adding info for No Bus:usbdev1.5_ep04
zd1211rw 1-1.4:1.0: zd_netdev_alloc() netdev->flags 0x1002
zd1211rw 1-1.4:1.0: zd_netdev_alloc() netdev->features 0x00000000
usb 1-1.4: request_fw_file() fw name zd1211/zd1211_ub
PM: Adding info for No Bus:1-1.4
PM: Removing info for No Bus:1-1.4
usb 1-1.4: Could not load firmware file zd1211/zd1211_ub. Error number -2
zd1211rw 1-1.4:1.0: couldn't load firmware. Error number -2
usb 1-1.4: reset high speed USB device using ehci_hcd and address 5
PM: Removing info for No Bus:usbdev1.5_ep01
PM: Removing info for No Bus:usbdev1.5_ep82
PM: Removing info for No Bus:usbdev1.5_ep83
PM: Removing info for No Bus:usbdev1.5_ep04
PM: Adding info for No Bus:usbdev1.5_ep01
PM: Adding info for No Bus:usbdev1.5_ep82
PM: Adding info for No Bus:usbdev1.5_ep83
PM: Adding info for No Bus:usbdev1.5_ep04
zd1211rw: probe of 1-1.4:1.0 failed with error -2
usbcore: registered new interface driver zd1211rw
zd1211rw initialized


Thanks,
 David
-- 
 David Santinoli
 Tieffe Sistemi S.r.l.                      viale Piceno 21, Milano
 www.tieffesistemi.com                         tel. +39 02 45490882