Re: [zd1211-devs] make succeeds, insmod fails

[Todor T. Z. <wa...@li...>]

Are you trying the released driver or the CVS one? Can you please try
the latest one from CVS if you haven't already?

Thanks


Jeroen Visscher wrote:

> Hi All,
>
>  
>
> Sorry for the noob question last time. I should have read the
> README.... But thanks for all the help.
>
>  
>
> Next bump is loading the module. After make install, modprobe cannot
> find zd1211. But with insmod this is what happens:
>
>  
>
> zd1211: unsupported module, tainting kernel.
>
> ZD1211 802.11b/g USB WLAN driver v20050315 loaded
>
> (c) Willig, Yang, Zviskov et al.
>
> http://zd1211.sourceforge.net/
>
> zd1211 device (0x0ace,0x1211) found.
>
> zd1211 device on USB 1.1 Host
>
> Firmware Version = 4330
>
> bulk out: wMaxPacketSize = 40
>
> bulk in: wMaxPacketSize = 40
>
> interrupt in: wMaxPacketSize = 40
>
> interrupt in: int_interval = 1
>
> bulk out: wMaxPacketSize = 40
>
> EEPROM Version = 4330
>
> USB Download Boot code success
>
> Downloaded firmware.
>
> usb 3-2: control timeout on ep0out
>
> Failed to enable firmware
>
> zd1211: probe of 3-2:1.0 failed with error -5
>
> usbcore: registered new driver zd1211
>