I just updated to latest status in CVS and ran grab/fi/test.sh. The grabber yle.fi is broken, but everything else looks OK. I'll check yle.fi when I have time.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
@tlindvall: if you think that is the incorrect action, then please add debugging output (see tv_grab_fi --help) from the latest code to show that it doesn't work for you.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I've been using telkku.com (yle.fi is only for yle channels) as most mythtv users in finland. It did stopped working a couple of weeks ago, so I suspect telkku.com has changed.
I've tried to download and build the xmltv package from the release tarball, nightly build and update script, but I always get version 0.5.59 (not like in your output version 0.5.65).
As can be seen above, tv_grab_fi returns only channel info but no program info from telkku.com (if I remember right earlier it used to give first channel and then programs for each channel).
I'm sorry, I couldn't figure out how to get the debug output.
Thanks for your answer
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
get_latest_version.sh only updates tv_grab_fi, not XMLTV. Your version list shows that you have the latest tv_grab_fi.
Just add --debug one or more times to the tv_grab_fi command line to add debugging information.
As I said before telkku.com works fine for me. Please make sure that you don't have any network problems, e.g. HTTP proxies or caches. Or maybe telkku.com has blocked your IP (although personally I doubt that telkku.com does this, because then my IP should have been blocked a long longlong time ago)
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
This was my fault. Latest version of the grabber works fine with telkku.com. I've not been patient enough to wait until data starts to output to the screen. (It takes really long time for the grabber to finish it's job).
There was probably some problem with earlier version of the grabber I was using. Now, when I ran mythfilldatabase from terminal window with the latest grabber, it worked ok.
Let's close this. But anyway thanks a lot for your help and thanks for updates also! Movie category detection fix is really good to have.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi,
It's working ok for me.
What have you tried? e.g. have you tried "--list-channels" or "--configure" ?
# ./tv_grab_fi --version XMLTV module version 0.5.65 This program version generated from tv_grab_fi.pl 2.04 2013/11/01 22:55:13 common.pm 2.01 2011/10/10 16:38:57 day.pm 2.00 2011/03/10 21:20:11 programme.pm 2.03 2014/01/03 19:11:36 programmeStartOnly.pm 2.02 2013/11/04 11:40:17 foxtv.pm 2.02 2013/11/20 07:58:21 mtv3.pm 2.04 2013/11/20 07:58:21 telkku.pm 2.03 2013/11/01 22:55:13 telvis.pm 2.03 2013/11/01 22:55:13 tvhs.pm 2.06 2013/11/01 22:34:23 yle.pm 2.02 2013/11/01 22:55:13I just updated to latest status in CVS and ran grab/fi/test.sh. The grabber yle.fi is broken, but everything else looks OK. I'll check yle.fi when I have time.
yle.fi source has been updated for the latest site changes. Please make sure that you test with the the latest code:
Closing.
@tlindvall: if you think that is the incorrect action, then please add debugging output (see
tv_grab_fi --help) from the latest code to show that it doesn't work for you.tarmo@serveri:~/xmltvupdate$ ./get_latest_version.sh
Fetching latest tv_grab_fi code...
Unpacking tarball...
Found modules: common.pm day.pm programme.pm programmeStartOnly.pm foxtv.pm mtv3.pm telkku.pm telvis.pm tvhs.pm yle.pm
Inserting module 'common.pm'
Inserting module 'day.pm'
Inserting module 'programme.pm'
Inserting module 'programmeStartOnly.pm'
Inserting module 'foxtv.pm'
Inserting module 'mtv3.pm'
Inserting module 'telkku.pm'
Inserting module 'telvis.pm'
Inserting module 'tvhs.pm'
Inserting module 'yle.pm'
Merge done.
-rwxr-xr-x 1 tarmo tarmo 70247 2014-06-19 21:31 tv_grab_fi
-rw-r--r-- 1 tarmo tarmo 26406 2014-06-19 21:31 tv_grab_fi.tgz
DONE.
tarmo@serveri:~/xmltvupdate$ ls
get_latest_version.sh tv_grab_fi tv_grab_fi.tgz
tarmo@serveri:~/xmltvupdate$ ls -l
yhteensä 108
-rwxr--r-- 1 tarmo tarmo 398 2014-06-19 21:23 get_latest_version.sh
-rwxr-xr-x 1 tarmo tarmo 70247 2014-06-19 21:31 tv_grab_fi
-rw-r--r-- 1 tarmo tarmo 26406 2014-06-19 21:31 tv_grab_fi.tgz
tarmo@serveri:~/xmltvupdate$ ./tv_grab_fi --version
XMLTV module version 0.5.59
This program version generated from
tv_grab_fi.pl 2.04 2013/11/01 22:55:13
common.pm 2.02 2014/06/14 18:18:36
day.pm 2.01 2014/06/14 18:18:36
programme.pm 2.04 2014/06/15 17:27:26
programmeStartOnly.pm 2.02 2013/11/04 11:40:17
foxtv.pm 2.02 2013/11/20 07:58:21
mtv3.pm 2.04 2013/11/20 07:58:21
telkku.pm 2.03 2013/11/01 22:55:13
telvis.pm 2.03 2013/11/01 22:55:13
tvhs.pm 2.07 2014/06/14 18:18:36
yle.pm 2.04 2014/06/15 17:27:26
tarmo@serveri:~/xmltvupdate$ ./tv_grab_fi
using config filename /home/tarmo/.xmltv/tv_grab_fi.conf
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE tv SYSTEM "xmltv.dtd">
getting listings: 0% [ ]<tv source-info-url="multiple" source-data-url="multiple" generator-info-name="XMLTV" generator-info-url="http://xmltv.org/">
<channel id="1.telkku.com">
<display-name lang="fi">Yle TV1</display-name>
getting listings: 4% [== ] </channel>
<channel id="10.telkku.com">
<display-name lang="fi">Yle Teema</display-name>
getting listings: 8% [==== ] </channel>
<channel id="11.telkku.com">
<display-name lang="fi">Liv</display-name>
getting listings: 9% [===== ]^C
tarmo@serveri:~/xmltvupdate$
I've been using telkku.com (yle.fi is only for yle channels) as most mythtv users in finland. It did stopped working a couple of weeks ago, so I suspect telkku.com has changed.
I've tried to download and build the xmltv package from the release tarball, nightly build and update script, but I always get version 0.5.59 (not like in your output version 0.5.65).
As can be seen above, tv_grab_fi returns only channel info but no program info from telkku.com (if I remember right earlier it used to give first channel and then programs for each channel).
I'm sorry, I couldn't figure out how to get the debug output.
Thanks for your answer
get_latest_version.sh only updates tv_grab_fi, not XMLTV. Your version list shows that you have the latest tv_grab_fi.
Just add
--debugone or more times to the tv_grab_fi command line to add debugging information.As I said before telkku.com works fine for me. Please make sure that you don't have any network problems, e.g. HTTP proxies or caches. Or maybe telkku.com has blocked your IP (although personally I doubt that telkku.com does this, because then my IP should have been blocked a long long long time ago)
Example run with test.conf containing only
channel 1.telkku.comFYI: I pushed an update that fixes the optional movie category detection for telkku.com.
This was my fault. Latest version of the grabber works fine with telkku.com. I've not been patient enough to wait until data starts to output to the screen. (It takes really long time for the grabber to finish it's job).
There was probably some problem with earlier version of the grabber I was using. Now, when I ran mythfilldatabase from terminal window with the latest grabber, it worked ok.
Let's close this. But anyway thanks a lot for your help and thanks for updates also! Movie category detection fix is really good to have.