Re: [xcat-user] ipmitool -I open vs lanplus vs lan

[Mark G. <gur...@us...>]

xCAT uses raw ipmi commands to do ipmi communication.

You can turn xCAT debug on with "chdef -t site clustersite xcatdebugmode=1" and then issue a command, like
"rpower <node> stat" to see all the raw ipmi commands xCAT is sending.

Use "chdef -t site clustersite xcatdebugmode=0" to turn debug off.

-----Original Message-----
From: Michael Green <mis...@gm...> 
Sent: Thursday, February 23, 2023 1:08 PM
To: xCAT Users Mailing list <xca...@li...>
Subject: [EXTERNAL] [xcat-user] ipmitool -I open vs lanplus vs lan

Hello collective wisdom,

What IPMI interface does xcat use? 
Is it lan or lanplus or open? (As in ipmitool -I ) Is it configurable?

I have a bunch of new Dell servers in the lab that don't seem to communicate over lan or lanplus interface, only open and I have trouble provisioning them through xcat. I suspect it's because of lanplus not supported/missing from these servers.
--
Regards,
Michael

_______________________________________________
xCAT-user mailing list
xCA...@li...
https://lists.sourceforge.net/lists/listinfo/xcat-user