Menu
▾
▴
Re: [xcat-user] PXE-E18: Server response timeout.
|
From: John R. <joh...@cr...> - 2020-05-27 09:24:10
|
[A[root@xcat-test ~]# xcatprobe xcatmn -i eth0
[mn]: Checking all xCAT daemons are running... [ OK ]
[mn]: Checking xcatd can receive command request... [ OK ]
[mn]: Checking 'site' table is configured... [ OK ]
[mn]: Checking provision network is configured... [ OK ]
[mn]: Checking 'passwd' table is configured... [ OK ]
[mn]: Checking important directories(installdir,tftpdir) are configured... [ OK ]
[mn]: Checking SELinux is disabled... [ OK ]
[mn]: Checking HTTP service is configured... [ OK ]
[mn]: Checking TFTP service is configured... [ OK ]
[mn]: Checking DNS service is configured... [ OK ]
[mn]: Checking DHCP service is configured... [ OK ]
[mn]: Checking NTP service is configured... [ OK ]
[mn]: Checking rsyslog service is configured... [ OK ]
[mn]: Checking firewall is disabled... [ OK ]
[mn]: Checking minimum disk space for xCAT ['/var' needs 1GB;'/install' needs 10GB;'/tmp' needs 1GB]... [ OK ]
[mn]: Checking Linux ulimits configuration... [ OK ]
[mn]: Checking network kernel parameter configuration... [ OK ]
[mn]: Checking xCAT daemon attributes configuration... [ OK ]
[mn]: Checking xCAT log is stored in /var/log/xcat/cluster.log... [ OK ]
[mn]: Checking xCAT management node IP: <10.28.9.183> is configured to static... [ OK ]
[mn]: Checking dhcpd.leases file is less than 100M... [ OK ]
=================================== SUMMARY ====================================
[MN]: Checking on MN... [ OK ]
That’s all good
xcatprobe detect_dhcpd -i <MN interface name> -m <node's mac address>
Start to detect DHCP, please wait 10 seconds [INFO]
++++++++++++++++++++++++++++++++++ [INFO]
There are 3 servers replied to dhcp discover. [INFO]
Server: XX.XX.X.XXX assign IP [XX.XX.X.XXX]. The next server is [XX.XX.X.XXX]! [INFO] <----- this is the prod xcat server, how do I remove this??
Server: XX.XX.X.XXX assign IP [ZZ.ZZ.Z.ZZZ]. The next server is [ZZ.ZZ.Z.ZZZ]! [INFO] <- THIS IS THE NEW TEST XCAT SERVER
Server:JJ.JJ.JJ.J assign IP [JJ.JJ.J.J]. The next server is [ZZ.ZZ.Z.ZZZ]! [INFO]
++++++++++++++++++++++++++++++++++ [INFO]
[root@xcat-test ~]#
From: Casandra H Qiu <cx...@us...>
Sent: 26 May 2020 17:17
To: xCAT Users Mailing list <xca...@li...>
Subject: Re: [xcat-user] PXE-E18: Server response timeout.
try those two command to diagnosis if there are configure issues
xcatprobe xcatmn -i <MN interface name>
xcatprobe detect_dhcpd -i <MN interface name> -m <node's mac address>
Thanks,
Casandra Qiu
...................................................................
Casandra Hong Qiu
Phone: (845) 433-9291, t/l 293-9291
Office: Building 8, 3-B-04
cx...@us...<mailto:cx...@us...>
[Inactive hide details for John Roche ---05/26/2020 12:11:36 PM---Tried this No luck]John Roche ---05/26/2020 12:11:36 PM---Tried this No luck
From: John Roche <joh...@cr...<mailto:joh...@cr...>>
To: xCAT Users Mailing list <xca...@li...<mailto:xca...@li...>>
Date: 05/26/2020 12:11 PM
Subject: Re: [xcat-user] [External] PXE-E18: Server response timeout.
________________________________
Tried this
No luck
How did people set up the dhpc part for doing a pxe boot?
John
From: Jarrod Johnson <jjo...@le...<mailto:jjo...@le...>>
Sent: 22 May 2020 17:25
To: xCA...@li...<mailto:xCA...@li...>
Subject: Re: [xcat-user] [External] PXE-E18: Server response timeout.
Hmm, nodeset <nodename> stat
Rinstall thould have taken care of that, but checking...
________________________________
From: John Roche <joh...@cr...<mailto:joh...@cr...>>
Sent: Friday, May 22, 2020 8:40 AM
To: xCA...@li...<mailto:xCA...@li...> <xCA...@li...<mailto:xCA...@li...>>
Subject: [External] [xcat-user] PXE-E18: Server response timeout.
Hi,
I recently build an xcat server
Rpower works
But doing an rinstall, it keeps failing at the PXE boot
I’m doing rinstal <node name> -u
It uses UEFI
I’m starting to pull my hair now on what’s the issue
Here is the error I see when I’m doing an rcons.
Thanks
Boot Failed - PXE Network: PciRoot(0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)/Ctrl(0x1)/MAC(E41D2DDE7931,0x0)/IPv4(0.0.0.0,0x0,DHCP,0.0.0.0,0.0.0.0,0.0.0.0)
>>Start PXE over IPv4.
PXE-E18: Server response timeout.
>>Start PXE over IPv4.
PXE-E18: Server response timeout.
Boot Failed - PXE Network: PciRoot(0x0)/Pci(0x2,0x0)/Pci(0x0,0x0)/Ctrl(0x2)/MAC(E41D2DDE7932,0x0)/IPv4(0.0.0.0,0x0,DHCP,0.0.0.0,0.0.0.0,0.0.0.0)
>>Start PXE over IPv4.
The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT
The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT_______________________________________________
xCAT-user mailing list
xCA...@li...<mailto:xCA...@li...>
https://lists.sourceforge.net/lists/listinfo/xcat-user<https://eur03.safelinks.protection.outlook.com/?url=https%3A%2F%2Flists.sourceforge.net%2Flists%2Flistinfo%2Fxcat-user&data=02%7C01%7C%7C5aded8d0ca73411ed74008d8019064b6%7C4eed7807ebad415aa7a99170947f4eae%7C0%7C0%7C637261066968431368&sdata=hGl%2FP0RvD6UwRK4s6JriP6pTVPSghk9McRK8CkTn%2FIg%3D&reserved=0>
The Francis Crick Institute Limited is a registered charity in England and Wales no. 1140062 and a company registered in England and Wales no. 06885462, with its registered office at 1 Midland Road London NW1 1AT
|
