|
From: Jarrod J. <jar...@gm...> - 2012-02-17 02:53:09
|
Some additional detail is required. How many nodes and what type of hardware? 'ps axf' output during an 'rpower on' attempt may be informative. 2012/2/16 smithjohn <par...@ho...> > hi,Lissa: > thanks a lot that you track my question zealously ! > before I uninstall the Redhat6.2, I had solve the problem of DHCP get > timeout. > that key of my table has error . In table of networks ,the nets join in a > wrong segment of ip address which I set . > so ,this problem had been solved. > but ,I am a new problem, we sitll use Redhat6.2 in managerment node, when > we use command "rpower all on " to power on all nodes, > the managerment node is running very very slowly. the cpu and memory of > managerment node have not more space to run program. > > tips: managerment node : redhat6.2 > tested node :redhat 6.2 > xcat release : 2.7 > node number :72 > at last , thanks again > > > > To: xca...@li... > > From: li...@us... > > Date: Thu, 16 Feb 2012 14:56:08 -0500 > > > Subject: Re: [xcat-user] tftp open timeout > > > > In that you will also have to uninstall Redhat 6.2, we can try and help > > you debug your problem. There have been successful installs of Redhat 6.2 > > with 2.7. We will need a lot more information though. For a start, > > please tell us the following: > > What document did you follow to setup the Management Node? > > What kind of hardware do you have in your cluster? > > > > > > Lissa K. Valletta > > 2-3/T12 > > Poughkeepsie, NY 12601 > > (tie 293) 433-3102 > > > > > > > > > > > > From: smithjohn <par...@ho...> > > To: <xca...@li...> > > Date: 02/15/2012 09:32 PM > > Subject: Re: [xcat-user] tftp open timeout > > > > > > > > thanks for your particular respondence ! I will uninstall xcat of release > > 2.7, change other relase. And waiting for you test over ,I try it again! > > > > > To: xca...@li... > > > From: li...@us... > > > Date: Wed, 15 Feb 2012 12:38:01 -0500 > > > Subject: Re: [xcat-user] tftp open timeout > > > > > > We have not officially release support for Redhat 6.2. We are still in > > > test. Also we have not released xCAT 2.7, it is still in test. Even > > > when 2.7 goes out, Redhat 6.2 will still be experimental until later > this > > > year, when we have had a chance to fully test it. > > > So what I am saying, you are running code that is still in test. It may > > > work or you may find problems in areas, we have not had a change to > > finish > > > testing. > > > > > > Lissa K. Valletta > > > 2-3/T12 > > > Poughkeepsie, NY 12601 > > > (tie 293) 433-3102 > > > > > > > > > > > > > > > > > > From: smithjohn <par...@ho...> > > > To: <xca...@li...> > > > Date: 02/15/2012 12:00 PM> Subject: Re: [xcat-user] tftp open timeout > > > > > > > > > > > > ok, thanks very much, you means the xcat 2.7 not support redhat 6.2, > but > > I > > > still install ,and use it now,so,do you have anyother way to solve this > > > question. thanks again > > > > > > > To: xca...@li... > > > > From: li...@us... > > > > Date: Wed, 15 Feb 2012 11:28:04 -0500 > > > > Subject: Re: [xcat-user] tftp open timeout > > > > > > > > xCAT does not support Redhat 6.2 yet and we have done only limited > > > testing. > > > > Maybe someone in the community has tried it though. > > > > > > > > Lissa K. Valletta > > > > 2-3/T12 > > > > Poughkeepsie, NY 12601 > > > > (tie 293) 433-3102 > > > > > > > > > > > > > > > > > > > > > > > > From: smithjohn <par...@ho...> > > > > To: <xca...@li...> > > > > Date: 02/1! 5/2012 10:41 AM > > > > Subject: Re: [xcat-user] tftp open timeout > > > > > > > > > > > > > > > > hi,guys: > > > > today I use xcat to find MAC and get BMC ,but when the system power > > > > on . Until run to DHCP found > > > > but it appear like this : > > > > DHCP.........................................connect time out > > > > > > > > then I! do something like this: > > > > makedhcp -n and service dhcpd restart > > > > alse do it like this: > > > > cd /var/lib/dhcpd/ and rm -rf * then > > > > service dhcpd restart > > > > but the issue still happen, sometime it alse can find mac and bmc ip > > > > > > > > so if you have time ,please help me see what happen of my server , > > > thanks. > > > > > > > > > > > > tip: My operating system is :red hat 6.2 > > > > xcat firmware:2.7 > > > > > > > > > > > > thanks again! > > > > > > > -------------! > > ----------------------------------------------------------------- > > &g! t; > > > > > > > > Virtualization & Cloud Management Using Capacity Planning > > > > Cloud computing makes use of virtualization - but cloud computing > > > > also focuses on allowing computing to be delivered as a service. > > > > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > > > _______________________________________________ > > > > xCAT-user mailing list > > > > xCA...@li... > > > > https! ://lists.sourceforge.net/lists/listinfo/xcat-user > > > > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > > > > > Virtualization & Cloud Management Using Capacity Planning > > > > Cloud computing makes use of virtualization - but cloud computing > > > > also focuses on allowing computing to be delivered as a service. > > > > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > > > __________! _____________________________________ > > > > xCAT-user mailing list > > > > xCA...@li... > > > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > > > ------------------------------------------------------------------------------ > > > > > > > > Virtualization & Cloud Management Using Capacity Planning > > > Cloud computing makes use of virtualization - but cloud computing > > > also focuses on allowing computing to be delivered as a service. > > > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > > _______________________________________________ > > > xCAT-user mailing list > > > xCA...@li... > > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > Virtualization & Cloud Management Using Capacity Planning > > > Cloud computing makes use of virtualization - but! cloud computing > > > also focuses on allowing computing to be deli! vered as a service. > > > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > > _______________________________________________ > > > xCAT-user mailing list > > > xCA...@li... > > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > ------------------------------------------------------------------------------ > > > > Virtualization & Cloud Management Using Capacity Planning > > Cloud computing makes use of virtualization - but cloud computing > > also focuses on allowing computing to be delivered as a service. > > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > _______________________________________________ > > xCAT-user mailing list > > xCA...@li... > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > > > > > > > ------------------------------------------------------------------------------ > > Virtualization & Cloud Management Using Capacity Planning > > Cloud computing makes use of virtualization - but cloud computing > > also focuses on allowing computing to be delivered as a service. > > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > > _______________________________________________ > > xCAT-user mailing list > > xCA...@li... > > https://lists.sourceforge.net/lists/listinfo/xcat-user > > > ------------------------------------------------------------------------------ > Virtualization & Cloud Management Using Capacity Planning > Cloud computing makes use of virtualization - but cloud computing > also focuses on allowing computing to be delivered as a service. > http://www.accelacomm.com/jaw/sfnl/114/51521223/ > _______________________________________________ > xCAT-user mailing list > xCA...@li... > https://lists.sourceforge.net/lists/listinfo/xcat-user > > |