|
From: guspolanco at gmail.c. (G. Polanco) - 2009-07-20 10:53:17
|
Yes, it works, but who corrupted the user of the BMC, the makeconservcf? Thanks On Mon, Jul 20, 2009 at 11:41 AM, Jarrod B Johnson <jbj...@us...>wrote: > Hmm, well now it probably works. > > [image: Inactive hide details for Gustavo Polanco ---07/20/2009 12:03:38 > PM---Jarrod, here the output in shell mode:]Gustavo Polanco ---07/20/2009 > 12:03:38 PM---Jarrod, here the output in shell mode: > > > From: > Gustavo Polanco <gus...@gm...> > To: > xCAT Users Mailing list <xca...@li...> > Date: > 07/20/2009 12:03 PM > > Subject: > Re: [xcat-user] Problems with rpower > ------------------------------ > > > > Jarrod, here the output in shell mode: > * > # ipmitool user list 2* > ID Name Callin Link Auth IPMI Msg Channel Priv Limit > 2 SERID true false true ADMINISTRATOR > * > # bmcsetup* > Set User Name command failed (user 2, name SERID): Invalid data field in > request > Setting LAN IP Address to 172.29.101.19 > Setting LAN Subnet Mask to 255.255.0.0 > Set User Password command failed (user 3): Invalid data field in request > Set User Password command failed (user 4): Invalid data field in request > Set up following user table: > ID Name Callin Link Auth IPMI Msg Channel Priv Limit > 2 USERID true false true ADMINISTRATOR > Enabling Channel 1: > > > Enabling ARP responses: Enabling BMC-generated ARP responses > > Enabling IPMI v 1.5 MD5 LAN access: > Enabling IPMI v 2.0 LAN access: > Enabling SOL for channel 1 > > Enabling SOL for user 2 > > Lighting Identify Light > * > # ipmitool user list 2* > ID Name Callin Link Auth IPMI Msg Channel Priv Limit > 2 USERID true false true ADMINISTRATOR > # > > > On Fri, Jul 17, 2009 at 6:11 PM, Jarrod B Johnson <*jbj...@us...*<jbj...@us...>> > wrote: > > Hmm, can you nodeset storage2 shell, reboot, run bmcsetup, and send > that output? The user table is missing the U in USERID, wondering if the BMC > didn't respond correctly. > > Gustavo Polanco ---07/17/2009 05:38:00 PM---Here the output: [root@mgtetc]# ssh storage2 > > > > From: > Gustavo Polanco <*gus...@gm...* <gus...@gm...>> > To: > xCAT Users Mailing list <*xca...@li...*<xca...@li...> > > > Date: > 07/17/2009 05:38 PM > Subject: > Re: [xcat-user] Problems with rpower > > ------------------------------ > > > > Here the output: > > [root@mgt etc]# ssh storage2 > Last login: Fri Jul 17 11:20:54 2009 from mgt.cluster > [root@storage2 ~]# modprobe ipmi_si > [root@storage2 ~]# modprobe ipmi_devintf > [root@storage2 ~]# ipmitool user list 1 > ID Name Enabled Callin Link Auth IPMI Msg Channel Priv > Limit > 2 SERID true true false true > ADMINISTRATOR > [root@storage2 ~]# > > On Fri, Jul 17, 2009 at 1:08 PM, Jarrod B Johnson <*jbj...@us... > * <jbj...@us...>> wrote: > Can you ssh into storage2, modprobe ipmi_si, modprobe ipmi_devintf, > and ipmitool user list 1? > > > Gustavo Polanco ---07/17/2009 01:54:33 PM---RPOWER and IPMITOOL > error > > From: > Gustavo Polanco <*gus...@gm...* <gus...@gm...>> > To:xCAT Users Mailing list <*xca...@li...*<xca...@li...> > > > Date: > 07/17/2009 01:54 PM > Subject: > Re: [xcat-user] Problems with rpower > ------------------------------ > > > * > > RPOWER and IPMITOOL error* > > [root@mgt~]# rpower storage2 off > storage2: Error: Invalid user name > > [root@mgt ~]# ipmitool -I lan -H bmc2 -U USERID -P PASSW0RD mc > info > Invalid user name > Error: Unable to establish LAN session > Get Device ID command failed > > [root@mgt ~]#* > > The WCONS gives me the follow error:* > > WCONS SCREEN > [read-only -- use ^E c ? for help] > Invalid user name > Error: Unable to establish LAN session > Get Device ID command failed > Failure to reach IPMI device, retrying in 20 seconds (Hit > Ctrl-E,c,o to skip) > > > > > On Fri, Jul 17, 2009 at 12:03 PM, Gustavo Polanco <* > gus...@gm...* <gus...@gm...>> wrote: > Yes, my passwd table is configured: > > > #key,username,password,comments,disable > "ipmi","USERID","PASSW0RD" > > Lissa: > I changed my nodehm to "0","19200","hard" and the > wcons shows me strange characters, look at the attached file. > > > > > On Fri, Jul 17, 2009 at 11:38 AM, deheller <* > deh...@pt...* <deh...@pt...>> wrote: > Since it's complaining about invalid userid, did you > remember to set your BMC password in the passwd table? E.g.: > > linuxbox:~ # tabdump passwd > #key,username,password,comments,disable > "ipmi","ADMIN","ADMIN",, > > > > > > > > On Fri, 17 Jul 2009 09:19:33 -0400, Thomas Alandt > wrote: > > I have not defined ipmi in nodehm and have no > issues for my uefi style > > nodes. Other then that your tabs look very > similar. Perhaps see if that > > makes any difference to eliminate root cause. > > > > "node05",,,,,,,"0","115200","hard",,, > > "node06",,,,,,,"0","115200"," > hard",,, > > > > > > Thomas Alandt > > WW Test Engineer Complex Solutions > > IBM-ISC > > Phone:919-543-7581 (t/l 441-7581 > > > > > > > > > Lissa > > > Valletta/Poughkee > > > psie/IBM@IBMUS > To > > Sent by: xCAT Users > Mailing list > > xcat-user-bounces > > @*lists.xcat.org*<http://lists.xcat.org/> > cc > > xCAT Users > Mailing list > > , > > 07/17/2009 07:56 * > xca...@li...*<xca...@li...> > > > AM > Subject > > Re: > [xcat-user] Problems with > > rpower > > > Please respond to > > > xCAT Users > > > Mailing list > > > *xcat.org*<http://xcat.org/>> > > > > > > > > > > > > > > > > > > > So I have my ipmi group in the passwd table with > the userid and password to > > use. > > > > Also in my nodehm table my ipmi entry looks like > this > > "service",,"ipmi","ipmi",,,,"0","19200","hard",,, > > > > > > Lissa K. Valletta > > 414/3-8 > > Poughkeepsie, NY 12601 > > (tie 293) 433-3102 > > > > > > > > > > > Thomas Alandt/Raleigh/IBM@IBMUS > > > Sent by: > > > *xca...@li...*<xca...@li...> > To > > xCAT > Users Mailing list > > > > 07/17/2009 07:22 AM > cc > > > > > > Subject > > Please respond to Re: > [xcat-user] Problems > > xCAT Users Mailing list with > rpower > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > IPMITOOL does indeed work with uefi models. I am > able to run it on dx360-m2 > > which is uefi based > > > > > > Thomas Alandt > > WW Test Engineer Complex Solutions > > IBM-ISC > > Phone:919-543-7581 (t/l 441-7581 > > Inactive hide details for Gustavo Polanco Gustavo > > Polanco > > > > > Gustavo Polanco > > > > > > Sent by: > > > *xca...@li...*<xca...@li...> > > > > > > > To > > 07/17/2009 01:22 AM > > > xCAT > Users Mailing list > > > > Please respond to > > > xCAT Users Mailing list > > > cc > > > > > > > > > > > > Subject > > > > > Re: > [xcat-user] Problems with > > rpower > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > I am working with a couple of machines x3550 M2 and > x3650 M2 with UEFI > > BIOS, I have understood that IPMITOOL doesn't work > with UEFI, is that true? > > > > > > These are my tables: > > > > > > > > > > > > HOSTS > > > > > > # Do not remove the following line, or various > programs > > > > > > # that require network functionality will fail. > > > > > > 127.0.0.1 localhost.localdomain localhost > > > > > > 172.20.0.1 mgt.cluster mgt > > > > > > 172.29.101.1 bmc1 bmc1.cluster > > > > > > 172.29.101.2 bmc2 bmc2.cluster > > > > > > 172.29.101.3 bmc3 bmc3.cluster > > > > > > 172.29.101.4 bmc4 bmc4.cluster > > > > > > 172.20.101.1 storage1 storage1.cluster > > > > > > 172.20.101.2 storage2 storage2.cluster > > > > > > 172.20.101.3 storage3 storage3.cluster > > > > > > 172.20.101.4 storage4 storage4.cluster > > > > > > 172.30.50.1 switch1 switch1.cluster > > > > > > NODELIST > > > > > > > #node,groups,status,appstatus,primarysn,comments,disable > > > > > > ,,,,,, > > > > > > > "storage1","ipmi,compute,4nodeperrack","configuring",,,, > > > > > > > "storage2","ipmi,compute,4nodeperrack","configuring",,,, > > > > > > > "storage3","ipmi,compute,4nodeperrack",?configuring?,,,, > > > > > > > "storage4","ipmi,compute,4nodeperrack",?configuring?,,,, > > > > > > "bmc1","ipmi,compute,4bmcperrack",,,,, > > > > > > "bmc2","ipmi,compute,4bmcperrack",,,,, > > > > > > "bmc3","ipmi,compute,4bmcperrack",,,,, > > > > > > "bmc4","ipmi,compute,4bmcperrack",,,,, > > > > > > "switch1","switch",,,,, > > > > > > IPMI > > > #node,bmc,bmcport,username,password,comments,disable > > "ipmi","|\D+(\d+).*$|bmc($1)|",,,,, > > > > > > > > > > > > NETWORKS > > > #netname,net,mask,mgtifname,gateway,dhcpserver,tftpserver,nameservers,ntpservers,logservers,dynamicrange,nodehostname,comments,disable > > > > > > > > ,"9.18.47.199","255.255.255.0","eth2",,,,,,,,,, > > > > > > > ,"172.20.0.0","255.255.0.0","eth0",,,"172.20.0.1","172.20.0.1",,,"172.20.255.1-172.20.255.200",,, > > > > > > > > > ,"172.30.0.0","255.255.0.0","eth1",,,"172.30.0.1","172.20.0.1",,,,,, > > > > > > > ,"172.29.0.0","255.255.0.0","eth0",,,"172.29.0.1","172.20.0.1",,,,,, > > > > > > > > > > > > NODEHM > > > > > > > #node,power,mgt,cons,termserver,termport,conserver,serialport,serialspeed,serialflow,getmac,comments,disable > > > > > > > > "ipmi","ipmi","ipmi","ipmi",,,,,,,,, > > > > > > "blade",,"blade",,,,,,,,,, > > > > > > "cyclades",,,"cyclades",,,,,,,,, > > > > > > "mrv",,,"mrv",,,,,,,,, > > > > > > "compute",,"ipmi","ipmi",,,,"0","115200","hard",,, > > > > > > SITE > > > > > > #key,value,comments,disable > > > > > > "xcatdport","3001",, > > > > > > "xcatiport","3002",, > > > > > > "tftpdir","/tftpboot",, > > > > > > "master","172.20.0.1",, > > > > > > "domain","cluster",, > > > > > > "installdir","/install",, > > > > > > "timezone","America/Mexico_City",, > > > > > > "nameservers","172.20.0.1",, > > > > > > "dhcpinterfaces","eth0",, > > > > > > "xcatprefix","/opt/xcat/",, > > > > > > "xcatroot","/opt/xcat",, > > > > > > "defserialport","0",, > > > > > > "defserialspeed","115200",, > > > > > > "ntpservers","mgt",, > > > > > > "iscsidir","/install/iscsi",, > > > > > > > > > > > > Thank you in advance > > > > > > Gustavo Polanco > > > > > > > > > > On Thu, Jul 16, 2009 at 7:01 PM, Vallard wrote: > > Could be: > > - bad network > > - bad ipmi device > > - ip resolving errors > > > > Try running ipmitool to it a few times (assuming 1u > device) and see if you > > get same results > > > > On Jul 16, 2009, at 3:10 PM, Gustavo Polanco > wrote: > > Hello > > > > > > Does anyone know why I get the following error when > I run the rpower > > command ?, the rpower sometimes works. > > > > > > > > [root@mgt tftpboot]# rpower storage1-storage4 off > > storage2: Error: Invalid user name > > storage1: Error: Invalid user name > > storage3: Error: Invalid user name > > storage4: Error: Invalid user name > > > > [root@mgt tftpboot]# rpower storage1-storage4 off > > storage1: Error: Invalid user name > > storage3: off > > storage4: off > > storage2: off > > > > This is my XCAT version: > > > > root@mgt tftpboot]# rpm -qa |grep -i xcat > > xCAT-nbroot-oss-x86_64-2.0-snap200801291344 > > yaboot-xcat-1.3.14-2 > > xCAT-nbroot-core-x86_64-2.2.1-snap200905282321 > > xCAT-nbroot-oss-ppc64-2.0-snap200801291320 > > xCAT-nbkernel-x86-2.6.18_92-8 > > perl-xCAT-2.2.2-snap200906251924 > > xCAT-nbroot-core-ppc64-2.2.1-snap200905282321 > > xCAT-nbkernel-ppc64-2.6.18_92-4 > > xCAT-nbkernel-x86_64-2.6.18_92-8 > > xCAT-client-2.2.1-snap200905282320 > > xCAT-nbroot-core-x86-2.2.1-snap200905282321 > > xCAT-server-2.2.2-snap200906251924 > > xCAT-nbroot-oss-x86-2.0-snap200804021050 > > xCAT-2.2.2-snap200906251736 > > > > Thank you in advance > > > > Gustavo Polanco > > > > _______________________________________________ > > xcat-user mailing list > > *xca...@li...*<xca...@li...> > > > *http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > > > > > > > > _______________________________________________ > > xcat-user mailing list > > *xca...@li...*<xca...@li...> > > *http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > > _______________________________________________ > > xcat-user mailing list > > *xca...@li...*<xca...@li...> > > *http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > > _______________________________________________ > > xcat-user mailing list > > *xca...@li...*<xca...@li...> > > *http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > > _______________________________________________ > > xcat-user mailing list > > *xca...@li...*<xca...@li...> > > *http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > > _______________________________________________ > xcat-user mailing list* > **xca...@li...*<xca...@li...> > * > **http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > _______________________________________________ > xcat-user mailing list* > **xca...@li...* <xca...@li...>* > **http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > > > > _______________________________________________ > xcat-user mailing list* > **xca...@li...* <xca...@li...>* > **http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > _______________________________________________ > xcat-user mailing list* > **xca...@li...* <xca...@li...>* > **http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > > > > _______________________________________________ > xcat-user mailing list* > **xca...@li...* <xca...@li...>* > **http://www.xcat.org/mailman/listinfo/xcat-user*<http://www.xcat.org/mailman/listinfo/xcat-user> > > _______________________________________________ > xcat-user mailing list > xca...@li... > http://www.xcat.org/mailman/listinfo/xcat-user > > > > _______________________________________________ > xcat-user mailing list > xca...@li... > http://www.xcat.org/mailman/listinfo/xcat-user > > -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.xcat.org/pipermail/xcat-user/attachments/20090720/807dbf0c/attachment-0001.htm |