Menu
▾
▴
[xcat-user] Re: Node install problems Unable to get ETH0 IPwhileinstalling
|
From: egan at sense.n. (E. Ford) - 2006-03-03 11:21:04
|
Let me know if you need help doing this. I will need you to nodeset nodename shell first, then run lspci and lspci -n and send me the output. -----Original Message----- From: xca...@li... [mailto:xca...@li...] On Behalf Of Egan Ford Sent: Friday, March 03, 2006 10:12 AM To: 'xCAT Users Mailing list' Subject: RE: [xcat-user] Re: Node install problems Unable to get ETH0 IPwhileinstalling Importance: High Does ALT-F[34] report any nic drivers loaded? tg3.o? If not they you need to update pcitable and perhaps the driver. -----Original Message----- From: xca...@li... [mailto:xca...@li...] On Behalf Of Vijeeth Reddy Sent: Friday, March 03, 2006 8:12 AM To: xCAT Users Mailing list Subject: [xcat-user] Re: Node install problems Unable to get ETH0 IP whileinstalling Importance: High I tried changing network switch too but I get the same error. Its not a network related issue. Thank you, Vijeeth On 3/1/06, Vijeeth Reddy <gvi...@gm... > wrote: I was going thorugh the xcat forms and found this http://xcat.org/pipermail/xcat-user/2004-July/003585.html <http://xcat.org/pipermail/xcat-user/2004-July/003585.html> . I also looked on the console of node by doing ALT+F3 and F4 but I don't see any network interface going down or up. Could this be a network issue ? each time I try to install it hangs on at a different package or sometimes in the begining itself with install exited abnormally message. Thanks, Vijeeth On 3/1/06, Vijeeth Reddy <gvi...@gm... > wrote: Below is the screen shot of this node installation. This time it hangs at info package installation. I have tried to install RHEL3 - update 5 manually and it worked fine. It hangs on the Xcat installation. Thank you, Vijeeth ????????????????????? Package Installation ????????????????????[5;10H? ? ? Name : info-4.5-3-x86_64 ? ? Size : 280k ? ? Summary: A stand-alone TTY-based reader for GNU texinfo ? ? documentation. ?[10;11H? ? ? ?[11;21H ? ? 100% ? ? ? ? Packages Bytes Time ? ? Total : 414 1099M 0:03:39 ? ? Completed: 53 236M 0:00:47 ? ? Remaining: 361 863M 0:02:52 ? ? ? ? 21% ? ? ? ?????????????????????????????????????????????????????????????? <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen On 2/27/06, Egan Ford <eg...@se...> wrote: I just requested this config from my lab manager, will start testing when setup. -----Original Message----- From: Vijeeth Reddy [mailto:gvi...@gm... <mailto:gvi...@gm...> ] Sent: Monday, February 27, 2006 11:50 AM To: eg...@se... Subject: Re: Node install problems Unable to get ETH0 IP while installing I am using Red Hat Enterprise Linux WS release 3 (Taroon Update 2). its e326. They are scsi disks. ( IBM-ESXS Model: MAT3073NC ). Thanks, Vijeeth On 2/24/06, Egan Ford <eg...@se...> wrote: Sorry for forgetting, but what RHWS3 Update level are you installing? Is this a e326 or e326m? What are you using for disk? IDE, SCSI/LSI, SATA, etc... Thanks. -----Original Message----- From: Vijeeth Reddy [mailto: <mailto:gvi...@gm...> gvi...@gm...] Sent: Wednesday, February 22, 2006 11:52 AM To: eg...@se... <mailto:eg...@se...> Subject: Re: Node install problems Unable to get ETH0 IP while installing I get a different error now while installing the new node (install exited abnormally) which is IBM e326. Below are the logs from management node and messages from console of the node. Feb 22 12:43:56 management dhcpd: DHCPDISCOVER from 00:11:25:1e:7a:80 via eth1 Feb 22 12:43:56 management dhcpd: DHCPOFFER on 172.20.247.152 <http://172.20.247.152/> to 00:11:25:1e:7a:80 via eth1 Feb 22 12:44:04 management dhcpd: Dynamic and static leases present for 172.20.247.152 <http://172.20.247.152/> . Feb 22 12:44:04 management dhcpd: Remove host declaration node36-eth0 or remove 172.20.247.152 <http://172.20.247.152/> Feb 22 12:44:04 management dhcpd: from the dynamic address pool for eth1 Feb 22 12:44:04 management dhcpd: DHCPREQUEST for 172.20.247.152 <http://172.20.247.152/> (172.20.247.1 <http://172.20.247.1/> ) from 00:11:25:1e:7a:80 via eth1 Feb 22 12:44:04 management dhcpd: DHCPACK on 172.20.247.152 <http://172.20.247.152/> to 00:11:25:1e:7a:80 via eth1 Feb 22 12:44:04 management tftpd[22060]: Serving /tftpboot/pxelinux.0 to 172.20.247.152:2070 <http://172.20.247.152:2070/> Feb 22 12:44:04 management tftpd[22060]: Serving /tftpboot/pxelinux.0 to 172.20.247.152:2071 <http://172.20.247.152:2071/> Feb 22 12:44:04 management tftpd[22060]: Serving /tftpboot/pxelinux.cfg/01-00-11-25-1e-7a-80 to 172.20.247.152:57089 <http://172.20.247.152:57089/> Feb 22 12:44:04 management tftpd[22060]: Serving /tftpboot/pxelinux.cfg/AC14F798 to 172.20.247.152:56834 <http://172.20.247.152:56834/> Feb 22 12:44:04 management tftpd[22060]: Serving /tftpboot/xcat/rhws3/x86_64/installz to 172.20.247.152:56835 <http://172.20.247.152:56835/> Feb 22 12:44:05 management tftpd[22060]: Serving /tftpboot/xcat/rhws3/x86_64/install.gz to 172.20.247.152:56836 <http://172.20.247.152:56836/> Feb 22 12:45:32 management dhcpd: DHCPDISCOVER from 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:32 management dhcpd: DHCPOFFER on 172.20.247.152 <http://172.20.247.152/> to 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:32 management dhcpd: Dynamic and static leases present for 172.20.247.152 <http://172.20.247.152/> . Feb 22 12:45:32 management dhcpd: Remove host declaration node36-eth0 or remove 172.20.247.152 <http://172.20.247.152/> Feb 22 12:45:32 management dhcpd: from the dynamic address pool for eth1 Feb 22 12:45:32 management dhcpd: DHCPREQUEST for 172.20.247.152 <http://172.20.247.152/> (172.20.247.1 <http://172.20.247.1/> ) from 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:32 management dhcpd: DHCPACK on 172.20.247.152 <http://172.20.247.152/> to 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:37 management rpc.mountd: authenticated mount request from node36:614 <http://node36.mwhpc.cat.com:614/> for /install/scripts/rhws3/x86_64 (/install) Feb 22 12:45:38 management dhcpd: DHCPDISCOVER from 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:38 management dhcpd: DHCPOFFER on 172.20.247.152 <http://172.20.247.152/> to 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:38 management dhcpd: DHCPDISCOVER from 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:38 management dhcpd: DHCPOFFER on 172.20.247.152 <http://172.20.247.152/> to 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:38 management dhcpd: Dynamic and static leases present for 172.20.247.152 <http://172.20.247.152/> . Feb 22 12:45:38 management dhcpd: Remove host declaration node36-eth0 or remove 172.20.247.152 <http://172.20.247.152/> Feb 22 12:45:38 management dhcpd: from the dynamic address pool for eth1 Feb 22 12:45:38 management dhcpd: DHCPREQUEST for 172.20.247.152 <http://172.20.247.152/> ( 172.20.247.1 <http://172.20.247.1/> ) from 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:38 management dhcpd: DHCPACK on 172.20.247.152 <http://172.20.247.152/> to 00:11:25:1e:7a:80 via eth1 Feb 22 12:45:43 management rpc.mountd: authenticated mount request from node36:618 <http://node36.mwhpc.cat.com:618/> for /install/rhws3/x86_64 (/install) Running anaconda, the Red Hat Enterprise Linux system installer - please wait... install exited abnormally sending termination signals...done sending kill signals...done disabling swap... unmounting filesystems... /mnt/runtime done disabling /dev/loop0 /proc/bus/usb done /proc done /dev/pts done /tmp/ramfs done /mnt/source done you may safely reboot your system Also some times the installation goes further until it formats the partitions and start installing few packages too but hangs at certain point. It hangs while installing MAKEDEV-3.3.12-1.x86_64.rpm package. Thank you, Vijeeth On 12/9/05, Egan Ford <eg...@se...> wrote: Looks like from the logs that you have a dynamic range that includes your static entries. They cannot overlap. -----Original Message----- From: Vijeeth Reddy [mailto: <mailto:gvi...@gm...> gvi...@gm...] Sent: Monday, December 05, 2005 4:01 PM To: xCAT Users Mailing list Subject: Re: Node install problems Unable to get ETH0 IP while installing Sorry did not attach screen shot.. Please see the attached doc file. On 12/5/05, Vijeeth Reddy <gvi...@gm... > wrote: Auto install stops determining the IP for eth0. Please see the attached screen shot. Any help in this regards is higly appreciated. I am trying to add new nodes to our cluster. I did the following to do so. Added macs to mac.tab, run makedhcp all and removed tftpboot directory and run mkstage from /opt/xcat/stage/ directory. Is this something to do with dhcp problem ? Thank you, Vijeeth -------------- next part -------------- An HTML attachment was scrubbed... URL: http://www.xcat.org/pipermail/xcat-user/attachments/20060303/6258e1c9/attachment-0001.htm |