Menu
▾
▴
[xcat-user] PXE Help!
|
From: egan at sense.n. (E. Ford) - 2002-09-30 07:23:34
|
Can you telnet "terminalserver" port?
What type of terminal server are you using?
Thanks.
-----Original Message-----
From: xca...@li...
[mailto:xca...@li...] On Behalf Of Mike Boger
Sent: Sunday, September 29, 2002 8:19 PM
To: xca...@li...
Subject: [xcat-user] PXE Help!
Hi Egan,
I've cycled power on the master node, the conservers... no luck....
Mike
----- Original Message -----
From: "Egan Ford" <eg...@se...>
To: <xca...@li...>
Sent: Saturday, September 28, 2002 5:32 PM
Subject: RE: [xcat-user] PXE Help!
> Restart conserver: service conserver restart
>
> If that does not work, verify that your terminal servers are up.
>
> -----Original Message-----
> From: xca...@li...
> [mailto:xca...@li...] On Behalf Of Mike Boger
> Sent: Friday, September 27, 2002 3:05 PM
> To: xca...@li...
> Subject: Re: [xcat-user] PXE Help!
>
>
> I'm getting frustrated here... The tftp stuff appears to be working,
> but all of the consoles now say "Console: nodeXX is down."
>
> Now what?
>
> Mike
> ----- Original Message -----
> From: "Egan Ford" <eg...@se...>
> To: <xca...@li...>
> Sent: Friday, September 27, 2002 1:39 PM
> Subject: RE: [xcat-user] PXE Help!
>
>
> > I have seen this problem before, but have been unable to repeat it
> > again. You can use the native tftp deamon if you like or use aftpd
> > from xinetd. Or apply all RH updates and kernels (I think that
fixed
> > it for me).
> >
> > To use atftpd with xinetd:
> >
> > chkconfig --level 345 atftpd off
> > cp /etc/rc.d/init.d/xinetd /etc/rc.d/init.d/xinetd.ORIG perl -pi -e
> > 's/daemon xinetd/daemon xinetd -loop 500/' /etc/rc.d/init.d/xinetd
> > cp -f /etc/xinetd.d/tftp /etc/xinetd.d/tftp.ORIG echo "service tftp
> > {
> > socket_type = dgram
> > protocol = udp
> > wait = yes
> > user = root
> > server = /usr/sbin/atftpd
> > server_args = --no-timeout --no-multicast /tftpboot
> > cps = 100
> > disable = no
> > }" >/etc/xinetd.d/tftp
> > service xinetd restart
> >
> > >-----Original Message-----
> > >From: xca...@li...
> > >[mailto:xca...@li...] On Behalf Of Mike Boger
> > >Sent: Friday, September 27, 2002 7:21 AM
> > >To: xca...@li...
> > >Cc: mar...@ti...
> > >Subject: Re: [xcat-user] PXE Help!
> > >
> > >
> > >Hello Vallard,
> > >
> > >All of the files are in place... The problem seems to be that the
> > >atftpd daemon will not stay running.
> > >
> > >Thanks,
> > >Mike
> > >----- Original Message -----
> > >From: "Vallard Benincosa" <va...@us...>
> > >To: <xca...@li...>
> > >Cc: <xca...@li...>
> > >Sent: Friday, September 27, 2002 6:03 AM
> > >Subject: Re: [xcat-user] PXE Help!
> > >
> > >
> > >>
> > >> Is the /tftpboot/pxelinux.0 file in place? What about the
> > >> /tftpboot/pxelinux.cfg/<HEX> files?
> > >>
> > >> Vallard Benincosa
> > >>
> > >>
> > >> |---------+------------------------------->
> > >> | | "Mike Boger" |
> > >> | | <bog...@ti...> |
> > >> | | Sent by: |
> > >> | | xcat-user-admin@list|
> > >> | | s.x-cat.org |
> > >> | | |
> > >> | | |
> > >> | | 09/26/2002 05:02 PM |
> > >> | | Please respond to |
> > >> | | xcat-user |
> > >> | | |
> > >> |---------+------------------------------->
> > >>
> > >>--------------------------------------------------------------
> > >-------------
> > >------------------------------------|
> > >> |
> > >|
> > >> | To: <xca...@li...>
> > >|
> > >> | cc:
> > >|
> > >> | Subject: Re: [xcat-user] PXE Help!
> > >|
> > >> |
> > >|
> > >> |
> > >|
> > >>
> > >>--------------------------------------------------------------
> > >-------------
> > >------------------------------------|
> > >>
> > >>
> > >>
> > >> Here you are... I'm working with "gorro001" right now....
> > >>
> > >> shared-network xCAT {
> > >> subnet 146.252.112.0 netmask 255.255.254.0 {
> > >> ## range 146.252.113.101 146.252.113.132;
> > >> filename "/tftpboot/pxelinux.0";
> > >> next-server 146.252.113.99;
> > >> option dhcp-server-identifier 146.252.113.99;
> > >> option option-128 E4:45:74:68:00:00;
> > >> option option-160 "timeout=5:default=195";
> > >> option option-193
> > >> "eepro100:::/tftpboot/xcat/stage.nbi:::console=ttyS0,9600 stage2
> > >eepro100";
> > >> option option-194
> > >> "pcnet32:::/tftpboot/xcat/stage.nbi:::console=ttyS0,9600
> > >stage2 pcnet32";
> > >> option option-195
> > >> "autodetect:::/tftpboot/xcat/stage.nbi:::console=ttyS0,9600
> > >stage2 eb";
> > >> }
> > >>
> > >> ###NO ENTRIES BELOW THIS LINE###
> > >> ###DO NOT ALTER--USE makedhcp###
> > >> ###begin makedhcp###
> > >>
> > >> host gorro001 {
> > >> hardware ethernet 00:09:6B:58:23:70;
> > >> filename "/tftpboot/pxelinux.0";
> > >> fixed-address 146.252.113.101;
> > >> option dhcp-server-identifier 146.252.113.99;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro002 {
> > >> hardware ethernet 00:09:6B:58:1E:C0;
> > >> fixed-address 146.252.113.102;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro003 {
> > >> hardware ethernet 00:09:6B:58:15:C1;
> > >> fixed-address 146.252.113.103;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro004 {
> > >> hardware ethernet 00:09:6B:58:19:57;
> > >> fixed-address 146.252.113.104;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro005 {
> > >> hardware ethernet 00:09:6B:58:1B:86;
> > >> fixed-address 146.252.113.105;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro006 {
> > >> hardware ethernet 00:02:55:C7:C8:D3;
> > >> fixed-address 146.252.113.106;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro007 {
> > >> hardware ethernet 00:09:6B:58:23:1A;
> > >> fixed-address 146.252.113.107;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro024 {
> > >> hardware ethernet 00:09:6B:58:23:E3;
> > >> fixed-address 146.252.113.124;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro025 {
> > >> hardware ethernet 00:09:6B:58:1E:12;
> > >> fixed-address 146.252.113.125;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro026 {
> > >> hardware ethernet 00:09:6B:58:23:52;
> > >> fixed-address 146.252.113.126;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro027 {
> > >> hardware ethernet 00:09:6B:58:1D:E6;
> > >> fixed-address 146.252.113.127;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro028 {
> > >> hardware ethernet 00:09:6B:58:16:C9;
> > >> fixed-address 146.252.113.128;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro029 {
> > >> hardware ethernet 00:09:6B:58:24:A3;
> > >> fixed-address 146.252.113.129;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro030 {
> > >> hardware ethernet 00:09:6B:58:25:DB;
> > >> fixed-address 146.252.113.130;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro031 {
> > >> hardware ethernet 00:09:6B:58:26:0D;
> > >> fixed-address 146.252.113.131;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> host gorro032 {
> > >> hardware ethernet 00:09:6B:58:19:CF;
> > >> fixed-address 146.252.113.132;
> > >> next-server 146.252.113.99;
> > >> }
> > >>
> > >> ###end makedhcp###
> > >> }
> > >>
> > >> ----- Original Message -----
> > >> From: "Vallard Benincosa" <va...@us...>
> > >> To: <xca...@li...>
> > >> Cc: <xca...@li...>
> > >> Sent: Thursday, September 26, 2002 1:59 PM
> > >> Subject: Re: [xcat-user] PXE Help!
> > >>
> > >>
> > >> >
> > >> > Could you send your /etc/dhcpd.conf file? That could have
> > >something to
> > >> do
> > >> > with this too.
> > >> >
> > >> > Vallard Benincosa
> > >> >
> > >> >
> > >> >
> > >> > "Mike Boger"
> > >> > <bog...@ti...> To:
> > >> <xca...@li...>
> > >> > Sent by: cc:
> > >> > xcat-user-admin@list Subject:
> > > [xcat-user]
> > >> PXE Help!
> > >> > s.x-cat.org
> > >> >
> > >> >
> > >> > 09/26/2002 04:45 PM
> > >> > Please respond to
> > >> > xcat-user
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > Hello All-
> > >> > I'm having trouble getting my nodes to boot via tftp... The
> > >> > dhcp
> > >> > information is sent to the node that's booting, but I see the
> > >following errors on
> > >the
> > >> > node: (The DHCP server's IP is 146.252.113.99- This
> > >client's IP should
> > >be
> > >> > 146.252.113.101)
> > >> >
> > >> > Intel Boot Agent Version 3.0.03
> > >> > Client MAC Address: 00:09:6B:58:23:70 GUID:
> > >> > 8C149D0D-36B4-4A12-A69A-31AA51CEB602
> > >> > DHCP IP: 146.252.113.99
> > >> >
> > >> > TFTP.
> > >> > PXE-T01: File Not Found
> > >> > PXE-E3B: TFTP Error- File Not Found
> > >> > PXE-M0F: Exiting Intel PXE ROM
> > >> >
> > >> > The dhcp server has the following messages:
> > >> >
> > >> > Sep 26 13:11:36 sombrero dhcpd: DHCPDISCOVER from
> > >00:09:6b:58:23:70 via
> > >> > eth1
> > >> > Sep 26 13:11:36 sombrero dhcpd: DHCPOFFER on 146.252.113.101 to
> > >> > 00:09:6b:58:23:7 0 via eth1
> > >> > Sep 26 13:11:37 sombrero dhcpd: DHCPREQUEST for
> > >146.252.113.101 from
> > >> > 00:09:6b:58
> > >> > :23:70 via eth1
> > >> > Sep 26 13:11:37 sombrero dhcpd: DHCPACK on 146.252.113.101 to
> > >> > 00:09:6b:58:23:70 via eth1
> > >> > Sep 26 13:12:37 sombrero dhcpd: DHCPDISCOVER from
> > >00:09:6b:58:23:70 via
> > >> > eth1
> > >> > Sep 26 13:12:37 sombrero dhcpd: DHCPOFFER on 146.252.113.101 to
> > >> > 00:09:6b:58:23:7 0 via eth1
> > >> >
> > >> > My /usr/local/xcat/ks71/compute71.kstmp has the following:
> > >> >
> > >> > #RedHat 7.1 Only
> > >> > #eg...@us...
> > >> > #v1.1.0 12/13/2001
> > >> > #
> > >> >
> > >> > lang en_US
> > >> > network --bootproto dhcp
> > >> >
> > >> > #
> > >> > # Where's the source?
> > >> > # nfs --server hostname.of.server or IP --dir
> > >> > /path/to/RH/CD/image # nfs --server 146.252.113.99 --dir
> > >> > /install/rh71/images
> > >> >
> > >> > #device ethernet eepro100
> > >> > keyboard "#KEYBOARD#"
> > >> > zerombr yes
> > >> >
> > >> > clearpart --linux
> > >> > #No RAID
> > >> > part /boot --size 50 --ondisk sda
> > >> > part / --size 1024 --ondisk sda
> > >> > part swap --size 1024 --ondisk sda
> > >> > part /var --size 1024 --ondisk sda
> > >> > part /scr --size 1 --grow --ondisk sda
> > >> >
> > >> > #
> > >> > # install or upgrade
> > >> > #
> > >> > install
> > >> >
> > >> > #
> > >> > # mouse selection
> > >> > #
> > >> > #mouse genericps/2 --emulthree
> > >> > mouse none
> > >> >
> > >> > #
> > >> > # Select a zone
> > >> > # Add the --utc switch if your hardware clock is set to GMT #
> > >> > #timezone US/Hawaii #timezone US/Pacific
> > >> > #timezone US/Mountain
> > >> > #timezone US/Central
> > >> > #timezone US/Eastern
> > >> > timezone --utc US/Mountain
> > >> > #
> > >> > # Don't do X
> > >> > #
> > >> > skipx
> > >> >
> > >> > #
> > >> > # To generate an encrypted root password use:
> > >> > #
> > >> > # perl -e 'print crypt("blah","Xa") . "\n";'p
> > >> > # openssl passwd -apr1 -salt xxxxxxxx password
> > >> > #
> > >> > # where "blah" is your root password.
> > >> > #
> > >> > # --iscrypted is broken
> > >> > #
> > >> > #rootpw --iscrypted XaLGAVe1C41x2
> > >> > #rootpw XaLGAVe1C41x2 --iscrypted
> > >> > rootpw xxxxx
> > >> >
> > >> > enablemd5
> > >> >
> > >> > lilo --location mbr
> > >> >
> > >> > #
> > >> > # Reboot after installation
> > >> > #
> > >> > reboot
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > Help!
> > >> >
> > >> > Mike Boger
> > >> >
> > >> >
> > >> > _______________________________________________
> > >> > xcat-user mailing list
> > >> > xca...@li...
> > >> > http://x-cat.org/mailman/listinfo/xcat-user
> > >> >
> > >> >
> > >> >
> > >> >
> > >> >
> > >> > _______________________________________________
> > >> > xcat-user mailing list
> > >> > xca...@li...
> > >> > http://x-cat.org/mailman/listinfo/xcat-user
> > >> >
> > >>
> > >> _______________________________________________
> > >> xcat-user mailing list
> > >> xca...@li...
> > >> http://x-cat.org/mailman/listinfo/xcat-user
> > >>
> > >>
> > >>
> > >>
> > >>
> > >> _______________________________________________
> > >> xcat-user mailing list
> > >> xca...@li...
> > >> http://x-cat.org/mailman/listinfo/xcat-user
> > >>
> > >
> > >_______________________________________________
> > >xcat-user mailing list
> > >xca...@li...
> > >http://x-cat.org/mailman/listinfo/xcat-user
> > >
> >
> > _______________________________________________
> > xcat-user mailing list
> > xca...@li...
> > http://x-cat.org/mailman/listinfo/xcat-user
> >
>
> _______________________________________________
> xcat-user mailing list
> xca...@li... http://x-cat.org/mailman/listinfo/xcat-user
>
> _______________________________________________
> xcat-user mailing list
> xca...@li... http://xcat.org/mailman/listinfo/xcat-user
>
Mike Boger
Systems Administrator, Engineering Systems
Texas Instruments, Tucson
(520) 746-7446
_______________________________________________
xcat-user mailing list
xca...@li... http://xcat.org/mailman/listinfo/xcat-user
|