Menu
▾
▴
Re: [wxlua-users] wxlua-users Digest, Vol 53, Issue 8
|
From: Milind G. <mil...@gm...> - 2011-12-28 18:07:44
|
Hi John,
Thanks for taking time to reply to those queries. Yes I
rebuilt wxstedit and compiled wxlua again and now I have the wxlua
application. For the wxGCDC thing I had to just go in the make file and
change the linking paths from /usr/local/lib to /usr/lib and then it worked
although not sure why. Then after everything was built I had to run
ldconfig /usr/local/lib for successully running wxlua since it wasn't able
to open libwxlua_gtk2u_wxbindstc-2.8.so.0.
As you mentioned I see that the media control is missing in
wxwidgets. I had built it with the instructions on the wiki of wxwidgets
basically just running the plain make and make install. I will try again
and see how I can enable everything.
As of now I was just wondering if there is any way to watch
table elements in the watch window of wxlua.
Thanks,
Milind
Date: Tue, 27 Dec 2011 11:33:27 -0500
> From: John Labenski <jla...@gm...>
> Subject: Re: [wxlua-users] cannot make wxlua on Ubuntu
> To: wxl...@li...
> Message-ID:
> <CAAK6oFegMqzU4Frhpqk4KqDAKM0mTVcHTJjUPthaLOVc=L2...@ma...
> >
> Content-Type: text/plain; charset="iso-8859-1"
>
> It sounds like your wxWidgets build is incomplete for the media control.
> Did you build it yourself? You'll need to rebuild it, but take note of the
> warnings during the configure stage and install the devel libaries for
> gstreamer until configure says that nothing is missing. You may need
> libcairo for wxgcdc.
>
> The wxlua app should build is wxluafreeze built. Running $wxluafreeze
> editor.wx.lua is the same as running wxlua.
>
> Again, I am w/o a computer or time for this week...
>
> John
> On Dec 27, 2011 5:23 AM, "Milind Gupta" <mil...@gm...> wrote:
>
> > Ok,
> > Was finally able to run wxlua applications. They seem to be
> running
> > but the media.wx.lua does not run. Gives the error:
> >
> > lua: media.wx.lua:131: attempt to call field 'wxMediaCtrl' (a nil value)
> > stack traceback:
> > media.wx.lua:131: in function 'main'
> > media.wx.lua:305: in main chunk
> > [C]: ?
> >
> >
> > Don't know why that is the case. Also don't have the wxlua executable
> > anywhere. I only see wxluacan and wxluafreeze. I did skip the wxstedit
> > compilation, maybe that prevented wxlua creation? Trying wxstedit
> > compilation now but it just won't compile. First there were include files
> > it could not find now I get this error on running make:
> >
> > g++ -o ../samples/stedit/wxstedit wxstedit_wxstedit.o -L../lib -L../lib
> > -lwxcode_gtk2u_stedit-2.8 -L/usr/local/lib -pthread
> -lwx_gtk2u_stc-2.8
> > -lwx_gtk2u_html-2.8 -lwx_gtk2u_adv-2.8 -lwx_gtk2u_core-2.8 -lwx_baseu-2.8
> > /usr/lib/gcc/i686-linux-gnu/4.6.1/../../../../lib/libwx_gtk2u_stc-2.8.so
> :
> > undefined reference to `wxGCDC::wxGCDC(wxWindowDC const&)@WXU_2.8'
> > /usr/lib/gcc/i686-linux-gnu/4.6.1/../../../../lib/libwx_gtk2u_stc-2.8.so
> :
> > undefined reference to `wxGCDC::SetPen(wxPen const&)@WXU_2.8'
> > /usr/lib/gcc/i686-linux-gnu/4.6.1/../../../../lib/libwx_gtk2u_stc-2.8.so
> :
> > undefined reference to `wxGCDC::~wxGCDC()@WXU_2.8'
> > /usr/lib/gcc/i686-linux-gnu/4.6.1/../../../../lib/libwx_gtk2u_stc-2.8.so
> :
> > undefined reference to `wxGCDC::SetBrush(wxBrush const&)@WXU_2.8'
> > collect2: ld returned 1 exit status
> > make: *** [../samples/stedit/wxstedit] Error 1
> >
> >
> > Any tips on how to get wxlua IDE? Thats the main thing I want to get.
> >
> > Thanks,
> > Milind
> >
> > On Mon, Dec 26, 2011 at 11:01 AM, Milind Gupta <mil...@gm...
> >wrote:
> >
> >> Hi John,
> >> Thank you very much for your reply.t worked after that
> >> and so did make install. But now when I try the example on the wxLua
> >> website:
> >>
> >> require("wx")
> >> frame = wx.wxFrame(wx.NULL, wx.wxID_ANY, "wxLua Minimal Demo",
> >> wx.wxDefaultPosition, wx.wxSize(450, 450),
> >> wx.wxDEFAULT_FRAME_STYLE)
> >>
> >> -- create a simple file menu
> >> local fileMenu = wx.wxMenu()
> >> fileMenu:Append(wx.wxID_EXIT, "E&xit", "Quit the program")
> >> -- create a simple help menu
> >> local helpMenu = wx.wxMenu()
> >> helpMenu:Append(wx.wxID_ABOUT, "&About",
> >> "About the wxLua Minimal Application")
> >>
> >> -- create a menu bar and append the file and help menus
> >> local menuBar = wx.wxMenuBar()
> >> menuBar:Append(fileMenu, "&File")
> >> menuBar:Append(helpMenu, "&Help")
> >> -- attach the menu bar into the frame
> >> frame:SetMenuBar(menuBar)
> >>
> >> -- create a simple status bar
> >> frame:CreateStatusBar(1)
> >> frame:SetStatusText("Welcome to wxLua.")
> >>
> >> -- connect the selection event of the exit menu item to an
> >> -- event handler that closes the window
> >> frame:Connect(wx.wxID_EXIT, wx.wxEVT_COMMAND_MENU_SELECTED,
> >> function (event) frame:Close(true) end )
> >> -- connect the selection event of the about menu item
> >> frame:Connect(wx.wxID_ABOUT, wx.wxEVT_COMMAND_MENU_SELECTED,
> >> function (event)
> >> wx.wxMessageBox('This is the "About" dialog of the Minimal
> >> wxLua sample.',
> >> "About wxLua",
> >> wx.wxOK + wx.wxICON_INFORMATION,
> >> frame)
> >> end )
> >>
> >> -- finally, show the frame window
> >> frame:Show(true)
> >>
> >>
> >>
> >>
> >> I get these messages and nothing happens:
> >>
> >> (lua5.1:11526): Gtk-WARNING **: Unable to locate theme engine in
> >> module_path: "pixmap",
> >>
> >> (lua5.1:11526): Gtk-WARNING **: Unable to locate theme engine in
> >> module_path: "pixmap",
> >>
> >> (lua5.1:11526): Gtk-WARNING **: Unable to locate theme engine in
> >> module_path: "pixmap",
> >>
> >> (lua5.1:11526): Gtk-WARNING **: Unable to locate theme engine in
> >> module_path: "pixmap",
> >>
> >>
> >> I am not sure what is wrong. Any help would be really appreciated.
> >> Another thing is that when I type wxlua on the prompt it says command
> not
> >> found. How do I run the integrated IDE provided by wxlua?
> >>
> >> Thanks,
> >> Milind
> >>
> >>
> >> Date: Mon, 26 Dec 2011 08:53:56 -0500
> >> From: John Labenski <jla...@gm...>
> >> Subject: Re: [wxlua-users] cannot make wxlua on Ubuntu
> >> To: wxl...@li...
> >> Message-ID:
> >> <
> >> CAA...@ma...>
> >> Content-Type: text/plain; charset="windows-1252"
> >>
> >> As a temporary measure, if you don't plan on using a wxImageHistogram,
> you
> >> can rem out the contents of that funtion and have it return 0. I'll look
> >> into it in the new year.
> >>
> >> Regards,
> >> John
> >>
> >> On Dec 26, 2011 3:34 AM, "Milind Gupta" <mil...@gm...> wrote:
> >>
> >> > Hi,
> >> > When I make wxLua by following the installtion
> >> instructions I
> >> > get the following error:
> >> >
> >> > make
> >> > (cd ./modules/ && make )
> >> > make[1]: Entering directory `/home/aryajur/Downloads/wxLua/modules'
> >> > /home/aryajur/Downloads/wxLua/bk-deps g++ -c -o
> >> > wxbindcore_dll_wxcore_image.o -I.pch/wxprec_wxbindcore_dll
> >> > -I../modules/wxbind/setup -I../modules -I./.. -I/usr/include/lua5.1
> >> > -DWXMAKINGDLL_WXBINDCORE -fPIC -DPIC
> >> > -I/usr/local/lib/wx/include/gtk2-unicode-release-2.8
> >> > -I/usr/local/include/wx-2.8 -D_FILE_OFFSET_BITS=64 -D_LARGE_FILES
> >> > -D__WXGTK__ -pthread -DwxLUA_USEBINDING_WXGL=0
> >> -DwxLUA_USEBINDING_WXMEDIA=0
> >> > -DwxLUA_USEBINDING_WXSTC=0 -O2 ./wxbind/src/wxcore_image.cpp
> >> > ./wxbind/src/wxcore_image.cpp: In function ?int
> >> > wxLua_wxImageHistogram_iterator_op_inc(lua_State*)?:
> >>
> >> > ./wxbind/src/wxcore_image.cpp:2296:54: error: taking address of
> >> temporary
> >> > [-fpermissive]
> >> > make[1]: *** [wxbindcore_dll_wxcore_image.o] Error 1
> >> > make[1]: Leaving directory `/home/aryajur/Downloads/wxLua/modules'
> >> > make: *** [modules] Error 2
> >> > aryajur@aryajur-ThinkPad-X61-Tablet:~/Downloads/wxLua$ make
> >> -fpermissive
> >> > make: permissive: No such file or directory
> >> > make: *** No rule to make target `permissive'. Stop.
> >> >
> >> >
> >> > Please can anybody help me resolve this. Or is there an easier way to
> >> > install wxLua???
> >> >
> >> > Thanks,
> >> > Milind
> >> >
> >> >
> >> > ------------------------------------------------------------
> >> ------------------
> >> > Write once. Port to many.
> >> > Get the SDK and tools to simplify cross-platform app development.
> Create
> >> > new or port existing apps to sell to consumers worldwide. Explore the
> >> > Intel AppUpSM program developer opportunity.
> >> appdeveloper.intel.com/join
> >> > http://p.sf.net/sfu/intel-appdev
> >> > _______________________________________________
> >> > wxlua-users mailing list
> >> > wxl...@li...
> >> > https://lists.sourceforge.net/lists/listinfo/wxlua-users
> >> >
> >> >
> >
> >
> >
> >
> >
> ------------------------------------------------------------------------------
> > Write once. Port to many.
> > Get the SDK and tools to simplify cross-platform app development. Create
> > new or port existing apps to sell to consumers worldwide. Explore the
> > Intel AppUpSM program developer opportunity. appdeveloper.intel.com/join
> > http://p.sf.net/sfu/intel-appdev
> > _______________________________________________
> > wxlua-users mailing list
> > wxl...@li...
> > https://lists.sourceforge.net/lists/listinfo/wxlua-users
> >
> >
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 2
> Date: Wed, 28 Dec 2011 01:05:19 -0800
> From: Milind Gupta <mil...@gm...>
> Subject: [wxlua-users] wxlua application
> To: wxl...@li...
> Message-ID:
> <CAO...@ma...
> >
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi,
> I was able to install wxlua successfully and running the wxlua
> IDE. One thing I notice that if I add a watch for a variable inside a table
> it doesn't work. It just gives the error message "string:Lua:Syntax error
> during pre-compilation". I tried giving the watch variable as a.hello as
> well as a["hello"] but neither worked. Is this a limitation or am I doing
> something wrong?
>
> Thanks,
> Milind
> -------------- next part --------------
> An HTML attachment was scrubbed...
>
> ------------------------------
>
> Message: 3
> Date: Wed, 28 Dec 2011 08:09:55 -0800
> From: SourceForge.net <no...@so...>
> Subject: [wxlua-users] [ wxlua-Feature Requests-3466523 ] Client
> Server
> To: SourceForge.net <no...@so...>
> Message-ID:
> <mai...@li...>
> Content-Type: text/plain; charset=UTF-8
>
> Feature Requests item #3466523, was opened at 2011-12-28 08:09
> Message generated for change (Tracker Item Submitted) made by andrearpin
> You can respond by visiting:
>
> https://sourceforge.net/tracker/?func=detail&atid=745327&aid=3466523&group_id=140042
>
> Please note that this message will contain a full copy of the comment
> thread,
> including the initial issue submission, for this request,
> not just the latest update.
> Category: Interface Improvements (example)
> Group: None
> Status: Open
> Priority: 5
> Private: No
> Submitted By: Andre Arpin (andrearpin)
> Assigned to: Nobody/Anonymous (nobody)
> Summary: Client Server
>
> Initial Comment:
> New version
>
> ----------------------------------------------------------------------
>
> You can respond by visiting:
>
> https://sourceforge.net/tracker/?func=detail&atid=745327&aid=3466523&group_id=140042
>
>
>
> ------------------------------
>
>
> ------------------------------------------------------------------------------
> Ridiculously easy VDI. With Citrix VDI-in-a-Box, you don't need a complex
> infrastructure or vast IT resources to deliver seamless, secure access to
> virtual desktops. With this all-in-one solution, easily deploy virtual
> desktops for less than the cost of PCs and save 60% on VDI infrastructure
> costs. Try it free! http://p.sf.net/sfu/Citrix-VDIinabox
>
> ------------------------------
>
> _______________________________________________
> wxlua-users mailing list
> wxl...@li...
> https://lists.sourceforge.net/lists/listinfo/wxlua-users
>
>
> End of wxlua-users Digest, Vol 53, Issue 8
> ******************************************
>
|
