|
From: Bill S. <g4...@cl...> - 2020-07-14 19:28:36
|
On 14/07/2020 13:58, Bensay 1 wrote: > Dear Devel List, > > I actually face an issue with the most recent version of WSJT-X; > > WSJT-X are set to use an Yaesu FT-991; > But at each band change with CAT it keep calling an non existant file : user_hardware + band value. > > I've read this on the WSJT-X doc : > "Depending on your station and antenna setup, band changes might require other switching besides retuning your radio. To make this possible in an automated way, whenever WSJT-X executes a successful band-change command to a CAT-controlled radio, it looks for a file named user_hardware.bat, user_hardware.cmd, user_hardware.exe, or user_hardware in the working directory. If one of these is found, WSJT-X tries to execute the command > > user_hardware nnn > In the above command nnn is the band-designation wavelength in meters. You must write your own program, script, or batch file to do the necessary switching at your station." > > In the past version I never face that situation before. > > I've create an user_hardware.bat with only @Echo off inside of the file but still no change. > > Is this an already known issue ? > > 73s de Benjamin - F4FPR Hi Benjamin, the issue yo are seeing is a known one, for WSPR band hopping I suggest using WSJT-X v2.1.2 until the next release which repairs this defect. 73 Bill G4WJS. |