Menu
▾
▴
Re: [Wrapper-user] Nothing occurs when starting
|
From: Leif M. <le...@ta...> - 2006-05-11 13:20:23
|
Delphine,
Sorry I didn't write you app so it is difficult to help. When run
as a service, the
Wrapper runs as the System user rather than as the user you are logged
in as when
running in the console. Most likely there are some environment
differences that are
causing you problems.
As you are not seeing the JVM in jconsole when run as a service, my
first guess
is that you are maybe running a different JVM. Try setting the Java
command in
the wrapper file to be absolute to the java command rather than using
the path or
environment variables.
Cheers,
Leif
Delphine VANDERMEYSBRUGGEN wrote:
> When I ran my service with the app.bat, it works, I see the jvm to
> connect to in the jconsole, but when I ran with net start "Indexation
> Application" I don't see anything in the jconsole so I can't connect.
>
> In fact my application is an indexing thread. The application launch a
> Timer and then the thread wait for the good time to index. (maybe it may
> help you to help me)
>
> Delphine
>
> -----Original Message-----
> From: wra...@li...
> [mailto:wra...@li...] On Behalf Of Leif
> Mortenson
> Sent: jeudi 11 mai 2006 9:48
> To: wra...@li...
> Subject: Re: [Wrapper-user] Nothing occurs when starting
>
> ***********************
> Your mail has been scanned by InterScan VirusWall.
> ***********-***********
>
>
> Delphine,
> According to the log, the Wrapper has called your application's main
>
> method:
> be.microresearch.scheduler.MainService and it completed without any
> problems.
> There are still non daemon threads running so the Wrapper believes that
> your
> application is running normally.
>
> Why it works in console mode, but not when run as a service? I
> can't say.
> But it appears to be something that is happening within your
> application.
>
> You are using 1.5.0. So the jconsole tool should be available. Add
> the
> wrapper.java.additional.1=-Dcom.sun.management.jmxremote property to
> your wrapper.conf. Then rerun your service. Once it is up and in this
> state,
> launch jconsole and then connect to the JVM using JMX. If you look at
> the
> threads page, you should be able to tell what your various threads are
> up to.
>
> Cheers,
> Leif
>
>
>
>
>
>
> Delphine VANDERMEYSBRUGGEN wrote:
>
>> I ran net start "Indexation Application" and I set the
>> wrapper.debug=true
>>
>> In my log there is:
>>
>> STATUS | wrapper | 2006/05/11 09:14:07 | --> Wrapper Started as
>>
> Service
>
>> DEBUG | wrapper | 2006/05/11 09:14:07 | Using tick timer.
>> DEBUG | wrapperp | 2006/05/11 09:14:07 | server listening on port
>> 32000.
>> STATUS | wrapper | 2006/05/11 09:14:07 | Launching a JVM...
>> DEBUG | wrapper | 2006/05/11 09:14:07 | command:
>> "C:\WINDOWS\system32\java.exe" -Xmx256m -Djava.library.path="../lib"
>> -classpath
>>
>>
> "../lib/wrappertest.jar;../lib/wrapper.jar;scheduler.jar;../lib/jdic.jar
>
> ;../lib/jdic_stub.jar;../lib/log4j-1.2.9.jar;../lib/lucene-core-1.9.1.ja
>
> r;../lib/packager.jar;../lib/PDFBox-0.7.2.jar;../lib/poi-2.5.1-final-200
>
>> 40804.jar" -Dwrapper.key="rOdomgWCwBLd3aAS" -Dwrapper.port=32000
>> -Dwrapper.jvm.port.min=31000 -Dwrapper.jvm.port.max=31999
>> -Dwrapper.debug="TRUE" -Dwrapper.pid=768 -Dwrapper.version="3.2.0"
>> -Dwrapper.native_library="wrapper" -Dwrapper.service="TRUE"
>> -Dwrapper.cpu.timeout="10" -Dwrapper.jvmid=1
>> org.tanukisoftware.wrapper.WrapperSimpleApp
>> be.microresearch.scheduler.MainService
>> DEBUG | wrapper | 2006/05/11 09:14:07 | JVM started (PID=572)
>> INFO | jvm 1 | 2006/05/11 09:14:07 | WrapperManager class
>> initialized by thread: main Using classloader:
>> sun.misc.Launcher$AppClassLoader@a39137
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Wrapper (Version 3.2.0)
>> http://wrapper.tanukisoftware.org
>> INFO | jvm 1 | 2006/05/11 09:14:07 |
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Wrapper Manager: JVM #1
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Running a 32-bit JVM.
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Wrapper Manager: Registering
>> shutdown hook
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Wrapper Manager: Using
>>
> wrapper
>
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Load native library. One or
>> more attempts may fail if platform specific libraries do not exist.
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Loading native library
>>
> failed:
>
>> wrapper-windows-x86-32.dll Cause: java.lang.UnsatisfiedLinkError: no
>> wrapper-windows-x86-32 in java.library.path
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Loaded native library:
>> wrapper.dll
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Calling native
>>
> initialization
>
>> method.
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Initializing WrapperManager
>> native library.
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Java Executable:
>> C:\WINDOWS\system32\java.exe
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Windows version: 5.1.2600
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Java Version :
>>
> 1.5.0_06-b05
>
>> Java HotSpot(TM) Client VM
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Java VM Vendor : Sun
>> Microsystems Inc.
>> INFO | jvm 1 | 2006/05/11 09:14:07 |
>> INFO | jvm 1 | 2006/05/11 09:14:07 |
>>
>>
> WrapperManager.start(org.tanukisoftware.wrapper.WrapperSimpleApp@f0eed6,
>
>> args[]) called by thread: main
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Open socket to
>> wrapper...Wrapper-Connection
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Failed attempt to bind using
>> local port 31000
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Failed attempt to bind using
>> local port 31001
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Opened Socket from 31002 to
>> 32000
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Send a packet KEY :
>> rOdomgWCwBLd3aAS
>> INFO | jvm 1 | 2006/05/11 09:14:07 |
>> handleSocket(Socket[addr=/127.0.0.1,port=32000,localport=31002])
>> DEBUG | wrapperp | 2006/05/11 09:14:07 | accepted a socket from
>> 127.0.0.1 on port 31002
>> DEBUG | wrapperp | 2006/05/11 09:14:07 | read a packet KEY :
>> rOdomgWCwBLd3aAS
>> DEBUG | wrapper | 2006/05/11 09:14:07 | Got key from JVM:
>> rOdomgWCwBLd3aAS
>> DEBUG | wrapperp | 2006/05/11 09:14:07 | send a packet LOW_LOG_LEVEL
>>
> :
>
>> 1
>> DEBUG | wrapperp | 2006/05/11 09:14:07 | send a packet PING_TIMEOUT :
>> 30
>> DEBUG | wrapperp | 2006/05/11 09:14:07 | send a packet PROPERTIES :
>> (Property Values)
>> DEBUG | wrapper | 2006/05/11 09:14:07 | Start Application.
>> DEBUG | wrapperp | 2006/05/11 09:14:07 | send a packet START : start
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Received a packet
>> LOW_LOG_LEVEL : 1
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Wrapper Manager: LowLogLevel
>> from Wrapper is 1
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Received a packet
>>
> PING_TIMEOUT
>
>> : 30
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Wrapper Manager: PingTimeout
>> from Wrapper is 30000
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Received a packet PROPERTIES
>>
> :
>
>> (Property Values)
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Monitoring of the JVM thread
>> count will be delayed for 1 seconds.
>> INFO | jvm 1 | 2006/05/11 09:14:07 | Received a packet START :
>> start
>> INFO | jvm 1 | 2006/05/11 09:14:07 | calling listener.start()
>> INFO | jvm 1 | 2006/05/11 09:14:07 | WrapperSimpleApp:
>>
> start(args)
>
>> Will wait up to 2 seconds for the main method to complete.
>> INFO | jvm 1 | 2006/05/11 09:14:07 | WrapperSimpleApp: invoking
>> main method
>> INFO | jvm 1 | 2006/05/11 09:14:09 | Send a packet START_PENDING
>>
> :
>
>> 5000
>> DEBUG | wrapperp | 2006/05/11 09:14:09 | read a packet START_PENDING
>>
> :
>
>> 5000
>> DEBUG | wrapper | 2006/05/11 09:14:09 | JVM signalled a start
>>
> pending
>
>> with waitHint of 5000 millis.
>> INFO | jvm 1 | 2006/05/11 09:14:10 | Send a packet START_PENDING
>>
> :
>
>> 5000
>> INFO | jvm 1 | 2006/05/11 09:14:10 | WrapperSimpleApp:
>>
> start(args)
>
>> end. Main Completed=false, exitCode=null
>> INFO | jvm 1 | 2006/05/11 09:14:10 | returned from
>>
> listener.start()
>
>> INFO | jvm 1 | 2006/05/11 09:14:10 | Send a packet STARTED :
>> DEBUG | wrapperp | 2006/05/11 09:14:10 | read a packet START_PENDING
>>
> :
>
>> 5000
>> DEBUG | wrapper | 2006/05/11 09:14:10 | JVM signalled a start
>>
> pending
>
>> with waitHint of 5000 millis.
>> DEBUG | wrapperp | 2006/05/11 09:14:10 | read a packet STARTED :
>> DEBUG | wrapper | 2006/05/11 09:14:10 | JVM signalled that it was
>> started.
>> DEBUG | wrapperp | 2006/05/11 09:14:10 | send a packet
>> SERVICE_CONTROL_CODE : 4
>> DEBUG | wrapper | 2006/05/11 09:14:10 | ServiceControlHandler(4)
>> DEBUG | wrapper | 2006/05/11 09:14:10 |
>>
> SERVICE_CONTROL_INTERROGATE
>
>> INFO | jvm 1 | 2006/05/11 09:14:10 | Received a packet
>> SERVICE_CONTROL_CODE : 4
>> INFO | jvm 1 | 2006/05/11 09:14:10 | Wrapper Manager:
>> ServiceControlCode from Wrapper with code 4
>> DEBUG | wrapperp | 2006/05/11 09:14:13 | send a packet PING : ping
>> INFO | jvm 1 | 2006/05/11 09:14:13 | Received a packet PING :
>>
> ping
>
>> INFO | jvm 1 | 2006/05/11 09:14:13 | Send a packet PING : ok
>> INFO | jvm 1 | 2006/05/11 09:14:13 | Non-daemon thread count = 4
>>
> -
>
>> 1(system) = 3
>> DEBUG | wrapperp | 2006/05/11 09:14:13 | read a packet PING : ok
>> DEBUG | wrapper | 2006/05/11 09:14:13 | Got ping response from JVM
>>
>>
>> Delphine.
>>
>> -----Original Message-----
>> From: wra...@li...
>> [mailto:wra...@li...] On Behalf Of Leif
>> Mortenson
>> Sent: mercredi 10 mai 2006 17:07
>> To: wra...@li...
>> Subject: Re: [Wrapper-user] Nothing occurs when starting
>>
>> ***********************
>> Your mail has been scanned by InterScan VirusWall.
>> ***********-***********
>>
>>
>> Delphine,
>> The log you posted shows me that you ran in a console successfully
>>
>
>
>> then killed the
>> app by pressing CTRL-C.
>> You then launch the app as a service. It appears to be starting
>> fine but that is all of
>> the log that you included. Is that everything? I am not able to see
>> what happens next.
>> You are not getting the "Scheduler started" message.
>>
>> If that is your full log file, try setting the wrapper.debug=true
>> property and running
>> it again. Your application may be getting stuck as it attempts to
>> launch the "Scheduler"
>> for some reason.
>>
>> Cheers,
>> Leif
>>
>> Delphine VANDERMEYSBRUGGEN wrote:
>>
>>
>>> In my log file there is:
>>>
>>> STATUS | wrapper | 2006/05/10 16:53:44 | --> Wrapper Started as
>>>
>>>
>> Console
>>
>>
>>> STATUS | wrapper | 2006/05/10 16:53:44 | Launching a JVM...
>>> INFO | jvm 1 | 2006/05/10 16:53:45 | Wrapper (Version 3.2.0)
>>> http://wrapper.tanukisoftware.org
>>> INFO | jvm 1 | 2006/05/10 16:53:45 |
>>> INFO | jvm 1 | 2006/05/10 16:53:47 | Scheduler started
>>>
>>>
>> (indexation
>>
>>
>>> begin)
>>> STATUS | wrapper | 2006/05/10 16:54:01 | CTRL-C trapped. Shutting
>>> down.
>>> STATUS | wrapper | 2006/05/10 16:54:03 | <-- Wrapper Stopped
>>> STATUS | wrapper | 2006/05/10 16:54:43 | --> Wrapper Started as
>>>
>>>
>> Service
>>
>>
>>> STATUS | wrapper | 2006/05/10 16:54:43 | Launching a JVM...
>>> INFO | jvm 1 | 2006/05/10 16:54:44 | Wrapper (Version 3.2.0)
>>> http://wrapper.tanukisoftware.org
>>> INFO | jvm 1 | 2006/05/10 16:54:44 |
>>>
>>>
>>> I wrote this in command line:
>>>
>>> D:\DVA\Indexation\IndexationApplication\bin>App
>>>
>>> D:\>net start "Indexation Application"
>>>
>>> -----Original Message-----
>>> From: wra...@li...
>>> [mailto:wra...@li...] On Behalf Of Leif
>>> Mortenson
>>> Sent: mercredi 10 mai 2006 16:46
>>> To: wra...@li...
>>> Subject: Re: [Wrapper-user] Nothing occurs when starting
>>>
>>> ***********************
>>> Your mail has been scanned by InterScan VirusWall.
>>> ***********-***********
>>>
>>>
>>> Delphine,
>>> What is in your wrapper.log file?
>>>
>>> Cheers,
>>> Leif
>>>
>>> Delphine VANDERMEYSBRUGGEN wrote:
>>>
>>>
>>>
>>>> Hi,
>>>>
>>>> When I run the App.bat file, it works. My application runs
>>>>
> correctly.
>
>>>> But when I start the service using "net start MyApp" or with the
>>>> wrapper.exe or when I go in the control panel and start it manually,
>>>>
>
>
>>>> nothing occurs. Just :
>>>>
>>>> The Indexation Application service is starting..
>>>>
>>>> The Indexation Application service was started successfully.
>>>>
>>>> Ok it is started but my application do not runs.
>>>>
>>>> Have any idea?
>>>>
>>>> Thanks
>>>>
>>>> Delphine
>>>>
>>>>
>>>>
>
>
>
> -------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services,
> security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache
> Geronimo
> http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
> _______________________________________________
> Wrapper-user mailing list
> Wra...@li...
> https://lists.sourceforge.net/lists/listinfo/wrapper-user
>
>
>
> -------------------------------------------------------
> Using Tomcat but need to do more? Need to support web services, security?
> Get stuff done quickly with pre-integrated technology to make your job easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
> http://sel.as-us.falkag.net/sel?cmd=k&kid0709&bid&3057&dat1642
> _______________________________________________
> Wrapper-user mailing list
> Wra...@li...
> https://lists.sourceforge.net/lists/listinfo/wrapper-user
>
>
|
