|
From: <ro...@so...> - 2005-07-15 19:44:39
|
MessageIf you install your service, than after that you change the =
property "wrapper.ntservice.name", you will effectively create a ghost =
service...
You cannot start nor uninstall the service......=20
Rog=E9rio.
----- Original Message -----=20
From: Klingensmith, Ross F=20
To: wra...@li...=20
Sent: Friday, July 15, 2005 2:23 PM
Subject: RE: [Wrapper-user] Wrapper Service Problem
It is possible, but the problem still remains. Under windows services =
it is not there as a different name either. Would changing the name =
while it is installed remove the old name from the list and NOT put a =
new one in?=20
Its basically like there is a ghost service on the machine.=20
And i have tried changing the name back to the 1 other name it was =
before at some point, but that did nothing.
thanks for your response,
Ross Klingensmith=20
Lockheed Martin IS&S - Valley Forge, PA=20
610-354-4122=20
-----Original Message-----
From: wra...@li... =
[mailto:wra...@li...] On Behalf Of Rog=E9rio
Sent: Friday, July 15, 2005 1:08 PM
To: wra...@li...
Subject: Re: [Wrapper-user] Wrapper Service Problem
Probably you changed service name under the wrapper.conf........
Cheers,
Rog=E9rio.
----- Original Message -----=20
From: Klingensmith, Ross F=20
To: wra...@li...=20
Sent: Friday, July 15, 2005 12:11 PM
Subject: [Wrapper-user] Wrapper Service Problem
Hey all,=20
Thanks for all the responses so far for other questions I have =
had. With your help I now have about 10 services up and running =
properly. However, 1 service is causing me some problems:
I have installed the service and that worked properly. Then I went =
to start the service and it started fine. Now the big issue:
1) if I try to stop the service, windows says that it doesn't =
exist=20
2) if I try to start the service it says its already running=20
3) if I try to uninstall it says its still running so cant=20
4) if I try to install it says its already installed as a =
service...(which conflicts with 1.) )=20
5) the service does NOT show up under windows services when in =
control panel=20
I am not sure what would cause this given that all other services =
are working properly. If you have any idea as to how this could happen =
or what to do it would be greatly appreciated. (Worst case scenario I =
can just rename the service and run it as that, but my managers don't =
want to do that )
Since this was one of the first services I wrote a few weeks ago, =
it is possible that I changed some of the ntservice properties in the =
config file while the service was unknowingly running. Would that =
explain this problem? And is there an easy way to fix it?
Thank you in advance=20
Ross Klingensmith=20
|