RE: [Wrapper-user] timeout problem --> windows issue

[Alex V. <ale...@ap...>]

Hi all,

I found the answer to my problem. Turns out to be a windows issue, which =
I'm
pasted below in case someone encounters the same problem. Note it only
applies to Win2000, not NT.

Rgrds, Alex.

(pasted from =
http://support.microsoft.com/default.aspx?scid=3Dkb;en-us;278712)

Error Message "Error 1053" When Using the Services Snap-in
View products that this article applies to.
This article was previously published under Q278712=20
SYMPTOMS
When you use the Services snap-in to start a local service on a =
Microsoft
Windows 2000-based computer, a Progress dialog box is displayed. If the
service does not start in the three-minute time period set for this =
Progress
dialog box, the snap-in may cause your system to display the following =
error
message:=20

Error 1053: The service did not respond to the start or control request =
in a
timely fashion.=20
CAUSE
This behavior may occur because the error message is displayed when the
service takes more than three minutes to respond. This arbitrary time =
limit
had been set with the intention that the user or administrator should be
advised of the service status when this time limit is reached. However, =
the
wording of the message may give the impression to the user that the =
service
is unable to start, when in fact the service may simply be taking a very
long time to start.

The preceding error message is misleading because the service may still =
be
in a Start Pending state.=20
RESOLUTION
To work around this behavior, you must clear the error message and =
continue
to check for the service to start. If the service does not start, you =
must
check the System event log for Service Control Manager errors related to =
the
service that is being monitored. If no error is posted to the event log, =
the
service should eventually start.=20

For more information about troubleshooting Service Control Manager =
errors,
please refer to the Microsoft Knowledge Base.=20
STATUS
Microsoft has confirmed that this is a problem in the Microsoft products
that are listed at the beginning of this article.=20
The information in this article applies to:
Microsoft Windows 2000 Server SP1
Microsoft Windows 2000 Advanced Server SP1
Microsoft Windows 2000 Professional SP1

_______________________
=20
Alexandre Vauthey
Director of Server Technology
Application Networks
444, Ramona Street
Palo Alto, CA 94301
Tel: 1 (650) 462-7224
=20
www.application-networks.com
_______________________


-----Original Message-----
From: wra...@li...
[mailto:wra...@li...] On Behalf Of Alex V.
Sent: Monday, February 16, 2004 4:17 PM
To: wra...@li...
Subject: [Wrapper-user] timeout problem


Hi,

I'm configuring the wrapper to never timeout =
(wrapper.startup.timeout=3D0),
but I still get a popup error message from windows after about 2 mins:

"Could not start the 'myService' service on local computer. Error 1053: =
the
service did not respond to the start or control request in a timely =
fashion"

I've also tried with 300 (5mns) and did not see any difference.

Any idea ?

Thanks, Alex.



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id438&op=3Dick
_______________________________________________
Wrapper-user mailing list
Wra...@li...
https://lists.sourceforge.net/lists/listinfo/wrapper-user