Re: [WOLK-devel] Compile errors with 4.2s

[KORN A. <kor...@ch...>]

On Wed, Jun 25, 2003 at 10:00:37AM +0200, Marc-Christian Petersen wrote:

> > VIA KT400, and KT333, mostly. I have at least two boxes that don't boot
> Well, that supposed to be in WOLK4.

At least the tricky AGP8x stuff for the kt400 isn't; on my gigabyte 7vaxp
ultra, I have to set the agp port to 4x in the bios for the agpgart module
from 2.4.20 to load (otherwise it says it can't determine the aperture
size).

> > with wolk4 at all, no matter what combination of acpi and apic options I
> > use.
> cool.

One of them worked with wolk4.0s-pre10 though. :)

lspci:

00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP]
00:04.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40)
00:04.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:04.2 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:04.3 USB Controller: VIA Technologies, Inc. USB (rev 16)
00:04.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40)
00:09.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev 30)
00:0a.0 SCSI storage controller: Adaptec AHA-2940UW Pro / AIC-788x (rev 01)
00:0c.0 VGA compatible controller: NVidia / SGS Thomson (Joint Venture) Riva128 (rev 10)

I tried 4.0s, 4.1s and 4.2s, but all of them failed to boot. Alas, I can't
be much more specific as the box is 1500km away and I have no console
access.

From what I gather, the symptoms were that it just stopped without any error
message after a while; I assume it had to do with IRQ routing.

Andrew

-- 
          Andrew Korn (Korn Andras) <korn at chardonnay.math.bme.hu>
           Finger korn at chardonnay.math.bme.hu for pgp key. QOTD:
               Definition of Terror: A female Klingon with PMS.