Re: [WOLK-devel] rc8 compile errors in adaptec drivers

[Frank H. <fra...@ep...>]

On Mon, May 12, 2003 at 01:46:16AM +0200, Olaf Unterkofler wrote:
> Hi all,
Hi,

> 
> I just tried to build rc8 and ran intro two show-stoppers ;-(
> 
> make -C aic7xxx modules
> make[3]: Entering directory `/usr/src/linux-2.4.20-WOLK4.0s-rc8/drivers/scsi/aic7xxx'
> gcc -D__KERNEL__ -I/usr/src/linux-2.4.20-WOLK4.0s-rc8/include  -Wall -Wstrict-prototypes -Wno-trigraphs -fno-strict-aliasing -fno-common -Wno-unused -finline-limit=2000 -O2 -fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=pentium4 -mmmx -msse -msse2 -falign-functions=4 -fprefetch-loop-arrays -maccumulate-outgoing-args -DMODULE -I/usr/src/linux-2.4.20-WOLK4.0s-rc8/drivers/scsi -Werror -nostdinc -iwithprefix include -DKBUILD_BASENAME=aic7xxx_osm  -c -o aic7xxx_osm.o aic7xxx_osm.c

Compiles (wolk4.0s-rc8) here without any problems, while built as a module.

System: 
RedHat 9 with gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-4) 

the snippet from my .config

       # SCSI support
    485 #
    486 CONFIG_SCSI=m
    487 CONFIG_BLK_DEV_SD=m
    488 CONFIG_SD_EXTRA_DEVS=40
    489 # CONFIG_CHR_DEV_ST is not set
    490 # CONFIG_CHR_DEV_OSST is not set
    491 CONFIG_BLK_DEV_SR=m
    492 # CONFIG_BLK_DEV_SR_VENDOR is not set
    493 CONFIG_SR_EXTRA_DEVS=2
    494 # CONFIG_CHR_DEV_SCH is not set
    495 CONFIG_CHR_DEV_SG=m
    496 CONFIG_SCSI_MULTI_LUN=y
    497 CONFIG_SCSI_CONSTANTS=y
    498 CONFIG_SCSI_LOGGING=y
    499 
    500 #
    501 # SCSI low-level drivers
    502 #
    503 CONFIG_SCSI_LOWLEVEL=y
    504 CONFIG_BLK_DEV_3W_XXXX_RAID=m
    505 # CONFIG_SCSI_7000FASST is not set
    506 # CONFIG_SCSI_ACARD is not set
    507 # CONFIG_SCSI_AHA152X is not set
    508 # CONFIG_SCSI_AHA1542 is not set
    509 # CONFIG_SCSI_AHA1740 is not set
    510 # CONFIG_SCSI_AACRAID is not set
    511 CONFIG_SCSI_AIC7XXX=m
    512 CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
    513 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
    514 # CONFIG_AIC7XXX_PROBE_EISA_VL is not set
    515 # CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
    516 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
    517 CONFIG_AIC7XXX_DEBUG_MASK=0
    518 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set
    519 CONFIG_SCSI_AIC79XX=m
    520 CONFIG_AIC79XX_CMDS_PER_DEVICE=32
    521 CONFIG_AIC79XX_RESET_DELAY_MS=15000
    522 # CONFIG_AIC79XX_BUILD_FIRMWARE is not set
    523 # CONFIG_AIC79XX_ENABLE_RD_STRM is not set
    524 # CONFIG_AIC79XX_DEBUG_ENABLE is not set
    525 CONFIG_AIC79XX_DEBUG_MASK=0
    526 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set

> -- 
> Mit freundlichen Gruessen / With kind regards,
> 
> Olaf Unterkofler

Frank Hollmann