#620 Partion on local Disk page is empty
My configuration is :
Debian 3.0,
My server is a IBM Xseries with a ServerRaid card.
The /proc/partitions file is :
major minor #blocks name
58 0 552960 lvg01/app
8 0 17773568 scsi/host0/bus0/target0/lun0/disc
8 1 392017
scsi/host0/bus0/target0/lun0/part1
8 2 488061
scsi/host0/bus0/target0/lun0/part2
8 3 1464183
scsi/host0/bus0/target0/lun0/part3
8 4 1
scsi/host0/bus0/target0/lun0/part4
8 5 1464151
scsi/host0/bus0/target0/lun0/part5
8 6 880078
scsi/host0/bus0/target0/lun0/part6
and the /proc/scsci/scsi file is :
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Direct-Access ANSI SCSI
revision: 02
Host: scsi0 Channel: 00 Id: 15 Lun: 00
Vendor: IBM Model: SERVERAID Rev: 1.00
Type: Processor ANSI SCSI
revision: 02
Host: scsi0 Channel: 01 Id: 08 Lun: 00
Vendor: IBM Model: YGLv3 S2 Rev: 0
Type: Processor ANSI SCSI
revision: 02
Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: SEAGATE Model: DAT 9SP40-000 Rev: 9030
Type: Sequential-Access ANSI SCSI
revision: 03
The /proc/scsi/ips file is :IBM ServeRAID General
Information:
Controller Type : ServeRAID
4Lx
Memory region : 0xedffe000
(8192 bytes)
Shared memory address : 0xe0852000
IRQ number : 22
BIOS Version : 4.84.01
Firmware Version : 4.84.01
Boot Block Version : 4.84.01
Driver Version : 4.80.26
Max Physical Devices : 15
Max Active Commands : 96
Current Queued Commands : 0
Current Active Commands : 0
Current Queued PT Commands : 0
Current Active PT Commands : 0
Logged In: YES
user_id=129364
Have you tried the latest 0.999 development version of webmin
available from http://www.webmin.com/devel.html ?
It fixes several problems with SCSI devices using this new-style
/dev/scsi/etc.. format.