#4813 System Time - Time Server Sync broken
If I go to Webmin > Hardware > System Time > Time server sync, enter a server such as "uk.pool.ntp.org" and select "Synchronize on schedule" with a default schedule then click "Sync and Apply" the settings aren't saved and nothing happens. There's a delay of several seconds so perhaps something is timing out.
This is on Ubuntu 16.04.1 LTS. I had it working before on Ubuntu 14.04 but I can't remember how, sorry. I want to change the schedule to hourly so I don't lock myself out of 2fa. I checked with apt-get that ntp and ntpdate are installed. The timedatectl command does work from the command line.
By the way, I think the menu category should be "System" not "Hardware" especially since I'm running on a VPS and I've changed that in Webmin Configuration > Reassign Modules.
Does any error get logged to
/var/webmin/miniserv.errorwhen you click the Sync button?Hard to tell because there are 10,000 messages in the log (in just a couple
of days) and timestamps are rare. Here are the messages that happened at
about the same time:
Failed to initialize SSL connection
untie attempted while 1 inner references still exist at
/usr/share/webmin/ajaxterm/index.cgi line 44.
untie attempted while 1 inner references still exist at
/usr/share/webmin/ajaxterm/index.cgi line 86.
Failed to initialize SSL connection
Unescaped left brace in regex is deprecated, passed through in regex; marked
by <-- HERE in
m/(ui_print_header|ui_print_unbuffered_header)([^,]+,[^,]*(\$text{ <-- HERE
'([^']+)'|\$text{"([^"]+)"|\&text('([^']+)'|\&text("([^"]+)")/ at
/usr/share/webmin/webmin-search-lib.pl line 288.
Unescaped left brace in regex is deprecated, passed through in regex; marked
by <-- HERE in
m/(ui_print_header|ui_print_unbuffered_header)([^,]+,[^,]*(\$text{'([^']+)'
|\$text{ <-- HERE "([^"]+)"|\&text('([^']+)'|\&text("([^"]+)")/ at
/usr/share/webmin/webmin-search-lib.pl line 288.
Unescaped left brace in regex is deprecated, passed through in regex; marked
by <-- HERE in m/(^|\s|mail_page_)header(\s*(\$text{ <-- HERE
'([^']+)'|\$text{"([^"]+)"|\&text('([^']+)'|\&text("([^"]+)")/ at
/usr/share/webmin/webmin-search-lib.pl line 294.
Unescaped left brace in regex is deprecated, passed through in regex; marked
by <-- HERE in m/(^|\s|mail_page_)header(\s*(\$text{'([^']+)'|\$text{ <--
HERE "([^"]+)"|\&text('([^']+)'|\&text("([^"]+)")/ at
/usr/share/webmin/webmin-search-lib.pl line 294.
untie attempted while 1 inner references still exist at
/usr/share/webmin/ajaxterm/index.cgi line 44.
untie attempted while 1 inner references still exist at
/usr/share/webmin/ajaxterm/index.cgi line 86.
Failed to initialize SSL connection
[01/Sep/2016:22:51:51 +0100] [86.147.107.18] Document follows : This web
server is running in SSL mode. Try the URL https://mail.beeches.it:11100/
instead.
Failed to initialize SSL connection
Failed to initialize SSL connection
Failed to initialize SSL connection
Failed to initialize SSL connection
Failed to initialize SSL connection
Failed to initialize SSL connection
Failed to initialize SSL connection
Failed to initialize SSL connection
Failed to initialize SSL connection
Failed to initialize SSL connection
[01/Sep/2016:23:02:23 +0100] [86.147.107.18] Document follows : This web
server is running in SSL mode. Try the URL https://mail.beeches.it:11100/
instead.
From: Jamie Cameron [mailto:jcameron@users.sf.net]
Sent: 01 September 2016 5:26
To: [webadmin:bugs] 4813@bugs.webadmin.p.re.sf.net
Subject: [webadmin:bugs] #4813 System Time - Time Server Sync broken
Does any error get logged to /var/webmin/miniserv.error when you click the
Sync button?
[bugs:#4813] https://sourceforge.net/p/webadmin/bugs/4813/ System Time -
Time Server Sync broken
Status: open
Group: 1.810
Created: Wed Aug 31, 2016 04:24 PM UTC by Phil McKerracher
Last Updated: Wed Aug 31, 2016 04:24 PM UTC
Owner: nobody
If I go to Webmin > Hardware > System Time > Time server sync, enter a
server such as "uk.pool.ntp.org" and select "Synchronize on schedule" with a
default schedule then click "Sync and Apply" the settings aren't saved and
nothing happens. There's a delay of several seconds so perhaps something is
timing out.
This is on Ubuntu 16.04.1 LTS. I had it working before on Ubuntu 14.04 but I
can't remember how, sorry. I want to change the schedule to hourly so I
don't lock myself out of 2fa. I checked with apt-get that ntp and ntpdate
are installed. The timedatectl command does work from the command line.
By the way, I think the menu category should be "System" not "Hardware"
especially since I'm running on a VPS and I've changed that in Webmin
Configuration > Reassign Modules.
Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/webadmin/bugs/4813/
To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
Related
Bugs: #4813
By the way, I get the same problem with the DKIM setting screen - it seemed
to accept the settings the first time I used it but now it ignores all
changes.
--
Phil McKerracher
+44 7565 803841
http://www.beechesit.uk www.beechesit.uk
From: Jamie Cameron [mailto:jcameron@users.sf.net]
Sent: 01 September 2016 5:26
To: [webadmin:bugs] 4813@bugs.webadmin.p.re.sf.net
Subject: [webadmin:bugs] #4813 System Time - Time Server Sync broken
Does any error get logged to /var/webmin/miniserv.error when you click the
Sync button?
[bugs:#4813] https://sourceforge.net/p/webadmin/bugs/4813/ System Time -
Time Server Sync broken
Status: open
Group: 1.810
Created: Wed Aug 31, 2016 04:24 PM UTC by Phil McKerracher
Last Updated: Wed Aug 31, 2016 04:24 PM UTC
Owner: nobody
If I go to Webmin > Hardware > System Time > Time server sync, enter a
server such as "uk.pool.ntp.org" and select "Synchronize on schedule" with a
default schedule then click "Sync and Apply" the settings aren't saved and
nothing happens. There's a delay of several seconds so perhaps something is
timing out.
This is on Ubuntu 16.04.1 LTS. I had it working before on Ubuntu 14.04 but I
can't remember how, sorry. I want to change the schedule to hourly so I
don't lock myself out of 2fa. I checked with apt-get that ntp and ntpdate
are installed. The timedatectl command does work from the command line.
By the way, I think the menu category should be "System" not "Hardware"
especially since I'm running on a VPS and I've changed that in Webmin
Configuration > Reassign Modules.
Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/webadmin/bugs/4813/
To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
Related
Bugs: #4813
I wonder if maybe your browser is caching the old content of the form?
On 01/Sep/2016 15:31 Phil McKerracher philmck@users.sf.net wrote ..
By the way, I get the same problem with the DKIM setting screen - it seemed to accept the settings the first time I used it but now it ignores all changes.
-- Phil McKerracher +44 7565 803841 http://www.beechesit.uk www.beechesit.uk
From: Jamie Cameron [mailto:jcameron@users.sf.net] Sent: 01 September 2016 5:26 To: [webadmin:bugs] 4813@bugs.webadmin.p.re.sf.net Subject: [webadmin:bugs] #4813 System Time - Time Server Sync broken
Does any error get logged to /var/webmin/miniserv.error when you click the Sync button?
[bugs:#4813] https://sourceforge.net/p/webadmin/bugs/4813/ System Time - Time Server Sync broken
Status: open Group: 1.810 Created: Wed Aug 31, 2016 04:24 PM UTC by Phil McKerracher Last Updated: Wed Aug 31, 2016 04:24 PM UTC Owner: nobody
If I go to Webmin > Hardware > System Time > Time server sync, enter a server such as "uk.pool.ntp.org" and select "Synchronize on schedule" with a default schedule then click "Sync and Apply" the settings aren't saved and nothing happens. There's a delay of several seconds so perhaps something is timing out.
This is on Ubuntu 16.04.1 LTS. I had it working before on Ubuntu 14.04 but I can't remember how, sorry. I want to change the schedule to hourly so I don't lock myself out of 2fa. I checked with apt-get that ntp and ntpdate are installed. The timedatectl command does work from the command line.
By the way, I think the menu category should be "System" not "Hardware" especially since I'm running on a VPS and I've changed that in Webmin Configuration > Reassign Modules.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/webadmin/bugs/4813/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
[bugs:#4813] System Time - Time Server Sync broken
Status: open Group: 1.810 Created: Wed Aug 31, 2016 04:24 PM UTC by Phil McKerracher Last Updated: Thu Sep 01, 2016 04:26 AM UTC Owner: nobody
If I go to Webmin > Hardware > System Time > Time server sync, enter a server such as "uk.pool.ntp.org" and select "Synchronize on schedule" with a default schedule then click "Sync and Apply" the settings aren't saved and nothing happens. There's a delay of several seconds so perhaps something is timing out.
This is on Ubuntu 16.04.1 LTS. I had it working before on Ubuntu 14.04 but I can't remember how, sorry. I want to change the schedule to hourly so I don't lock myself out of 2fa. I checked with apt-get that ntp and ntpdate are installed. The timedatectl command does work from the command line.
By the way, I think the menu category should be "System" not "Hardware" especially since I'm running on a VPS and I've changed that in Webmin Configuration > Reassign Modules.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/webadmin/bugs/4813/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/subscriptions/
Related
Bugs: #4813
No it's not that, I checked using incognito mode and a different browser.
Both problems (NTP and DKIM settings) are dead easy to reproduce though (I've checked, in case I broke things somehow) - just fire up Ubuntu 16.04 in a VM with default config, run the virtualmin install.sh and post-install config then go to the setting screens in question.
I see the ntp package is deprecated now in Ubuntu, which might have something to do with it.
I've managed to get DKIM working manually by following the Ubuntu tutorial but the setting screen still thinks it's disabled.
At the moment I'm still firefighting all the other things that have been broken by the new OS (mainly apps not working with PHP 7) but I'll investigate a bit more when I can and make some suggestions. The standard postfix config in particular is quite vulnerable out of the box without postscreen and postsrs and some cipher tuning - this time I'm documenting my changes.
One thing you should try is switching the Webmin theme back from the new Authentic theme to the previous default. This can be done at Webmin -> Change Language and Theme, by selecting "Virtualmin framed theme"
Good idea - and it worked for the NTP setting. I'm not sure why the theme
changes the functionality but at least there's a workaround. So should I
raise a new bug on Authentic theme?
It didn't make any difference for the DKIM setting so I guess I should raise
a separate bug for that.
--
Phil McKerracher
+44 7565 803841
http://www.beechesit.uk www.beechesit.uk
From: Jamie Cameron [mailto:jcameron@users.sf.net]
Sent: 05 September 2016 18:43
To: [webadmin:bugs] 4813@bugs.webadmin.p.re.sf.net
Subject: [webadmin:bugs] #4813 System Time - Time Server Sync broken
One thing you should try is switching the Webmin theme back from the new
Authentic theme to the previous default. This can be done at Webmin ->
Change Language and Theme, by selecting "Virtualmin framed theme"
[bugs:#4813] https://sourceforge.net/p/webadmin/bugs/4813/ System Time -
Time Server Sync broken
Status: open
Group: 1.810
Created: Wed Aug 31, 2016 04:24 PM UTC by Phil McKerracher
Last Updated: Sat Sep 03, 2016 08:30 PM UTC
Owner: nobody
If I go to Webmin > Hardware > System Time > Time server sync, enter a
server such as "uk.pool.ntp.org" and select "Synchronize on schedule" with a
default schedule then click "Sync and Apply" the settings aren't saved and
nothing happens. There's a delay of several seconds so perhaps something is
timing out.
This is on Ubuntu 16.04.1 LTS. I had it working before on Ubuntu 14.04 but I
can't remember how, sorry. I want to change the schedule to hourly so I
don't lock myself out of 2fa. I checked with apt-get that ntp and ntpdate
are installed. The timedatectl command does work from the command line.
By the way, I think the menu category should be "System" not "Hardware"
especially since I'm running on a VPS and I've changed that in Webmin
Configuration > Reassign Modules.
Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/webadmin/bugs/4813/
To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
Related
Bugs: #4813
Yes, please file a bug here: https://github.com/qooob/authentic-theme/issues