Menu
▾
▴
Re: [WebERP-developers] Question about Quality Control module
|
From: Andrew G. <aga...@re...> - 2015-03-05 14:53:56
|
There would need to be a change in the unique key I think in order to allow that to happen however I see this as 3 separate tests using the same "Method". For Plastics we measure "Melt Flow Rate". We use METHOD ASTM D1238. Depending on the type of Plastic you perform this measure using different weight and temperatures. We setup multiple tests like the below. 31 Melt Flow Rate @ 190°C - 2160g ASTM D 1238 PhysicalProperty g/10min Range Yes Yes Yes Yes Yes Edit<http://127.0.0.1/weberp/QATests.php?SelectedQATest=31> Delete<http://127.0.0.1/weberp/QATests.php?SelectedQATest=31&delete=1> 25 Melt Flow Rate @ 200°C - 5000g ASTM D 1238 PhysicalProperty g/10min Range Yes Yes Yes Yes Yes Edit<http://127.0.0.1/weberp/QATests.php?SelectedQATest=25> Delete<http://127.0.0.1/weberp/QATests.php?SelectedQATest=25&delete=1> 33 Melt Flow Rate @ 230°C - 2160g ASTM D 1238 PhysicalProperty g/10min Range Yes Yes Yes Yes Yes Edit<http://127.0.0.1/weberp/QATests.php?SelectedQATest=33> Delete<http://127.0.0.1/weberp/QATests.php?SelectedQATest=33&delete=1> 32 Melt Flow Rate @ 230°C - 3800g ASTM D 1238 PhysicalProperty g/10min Range Yes Yes Yes Yes Yes Edit<http://127.0.0.1/weberp/QATests.php?SelectedQATest=32> Delete<http://127.0.0.1/weberp/QATests.php?SelectedQATest=32&delete=1> 34 Melt Flow Rate @ 250°C - 10kg ASTM D 1238 PhysicalProperty g/10min Range Yes Yes Yes Yes Yes Edit<http://127.0.0.1/weberp/QATests.php?SelectedQATest=34> Delete<http://127.0.0.1/weberp/QATests.php?SelectedQATest=34&delete=1> 7 Melt Flow Rate @ 300°C - 1200g ASTM D1238 PhysicalProperty g/10min Range Yes Yes Yes Yes Yes Edit<http://127.0.0.1/weberp/QATests.php?SelectedQATest=7> Delete<http://127.0.0.1/weberp/QATests.php?SelectedQATest=7&delete=1> If I just said I wanted to test "Melt Flow Rate" measurement multiple times on the specification where would I say how each time I tested it which Temperature and weight to us? And in yours, when you say Test the "dimension", how do you specify which dimension to test. I don't think either of us is right or wrong. In order to do this your way we would have to add an additional identifier to the specification otherwise how will the person performing the test and entering the results know which "dimension" to enter their data in? If I were to ask you "What is the specification for measurement?" you couldn't answer. Unless I asked you "What is the specification for measurement A". So we need a place to store A on the specification. This might be a big change to downstream stuff too like entering results. More work than I would want to put in for Just setting up the same test 50 times (with slightly different description @ Loc 1, @ Loc 2, @Loc 3 etc). And Adding test to the spec is very easy this way Best Regards, Andrew Galuski ResMart LLC. 817.615.2038 (Office) 817.821.0544 (Cell) www.resmart.com -----Original Message----- From: ExsonQu [mailto:hex...@gm...] Sent: Thursday, March 05, 2015 4:04 AM To: web...@li... Subject: Re: [WebERP-developers] Question about Quality Control module *Hi, Andrew,* Let's give more details: We have spec like this: Location description specification: 1 dimension 11+-0.3 2 dimension 8.7+-0.3 3 dimension 8.5+_0.3 If we need to create this spec, we have to have 3 QA tests. We can set it as size1 type: range unit:mm, size 2 type: range unit:mm size 3 type:range unit:mm. Should we allow use only define QA test size1? And use size1 only to create the specification? Thanks and best regards! Exson -- View this message in context: http://weberp-accounting.1478800.n4.nabble.com/Question-about-Quality-Control-module-tp4658156p4658161.html Sent from the web-ERP-developers mailing list archive at Nabble.com. ------------------------------------------------------------------------------ Dive into the World of Parallel Programming The Go Parallel Website, sponsored by Intel and developed in partnership with Slashdot Media, is your hub for all things parallel software development, from weekly thought leadership blogs to news, videos, case studies, tutorials and more. Take a look and join the conversation now. http://goparallel.sourceforge.net/ _______________________________________________ Web-erp-developers mailing list Web...@li...<mailto:Web...@li...> https://lists.sourceforge.net/lists/listinfo/web-erp-developers |
