Re: [wccpd-devel] few new things
Status: Alpha
Brought to you by:
ejbs
|
From: Eduardo J. B. <ej...@ne...> - 2002-02-02 00:15:44
|
Oops... that's bad.
Can you attach a tcpdump -lxn -s 2048 udp port 2048 ?
That would help me figure out what's going on.
--ejbs
On Fri, 2002-02-01 at 19:05, Blues wrote:
When you start using something more - you will see some trouble :) One=20
cache works fine, no matter what kind.
=20
1. I wanted to configure 1 Cisco cache engine and 2 proxy on squid. I'v=
e=20
configured first one as encapsulated and the rest as direct routing. Th=
is=20
is what I've became in logs:
=20
Feb 1 14:17:40 charon wccpd: HERE_I_AM: received-id mismatc=
hed (ours=3D35005211 theirs=3D0)
Feb 1 14:18:01 charon wccpd: HERE_I_AM: received-id mismatc=
hed (ours=3D521595368 theirs=3D0)
Feb 1 14:18:12 charon wccpd: HERE_I_AM: received-id mismatc=
hed (ours=3D521595368 theirs=3D0)
Feb 1 14:18:32 charon wccpd: HERE_I_AM: received-id mismatc=
hed (ours=3D294702567 theirs=3D0)
Feb 1 14:18:43 charon wccpd: HERE_I_AM: received-id mismatc=
hed (ours=3D294702567 theirs=3D0)
Feb 1 14:19:04 charon wccpd: HERE_I_AM: received-id mismatc=
hed (ours=3D714386896 theirs=3D0)
=20
And it does not work :( Maybe this is because this one is squid on Sun.=
..?=20
I don't know - after all current scripts don't allow to make mixed type=
s=20
of caches (is it possible? should be..)
=20
2. every manipulation on enable/disable scripts causes that I have to=20
restart whole wccpd. All of the rules are existenz but no trafic is the=
re.
=20
3. How is it that wccp after restart remembers last settings? He=20
automaticaly starts last servers. Even if I've done _disable_ .=20
=20
4. Why cache is detected even if protocol isn't correct? Encapsulation =
I=20
mean. After making restart wccpd detects (restores prom memory?) last=20
configuration and when I've changed encapsulation type I have in my log=
s:
=20
Feb 1 16:06:25 charon wccpd: HERE_I_AM: WebCache at 153.1.1=
.1 became usable
Feb 1 16:06:35 charon wccpd: WCCP enabled
Feb 1 16:06:35 charon wccpd: WebCache at 153.1.1.1 enabled
=20
# ipvsadm
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
FWM 128 wlc
-> 153.1.1.1:0 Route 1 230 80
=20
welll... this is Cisco, so it's wrong.
=20
--=20
---------------------------------
pozdr. Pawe=B3 Go=B3aszewski =20
---------------------------------
CPU not found - software emulation...
=20
=20
=20
=20
=20
=20
=20
_______________________________________________
wccpd-devel mailing list
wcc...@li...
https://lists.sourceforge.net/lists/listinfo/wccpd-devel
____________________________________________________
eduardo blanco=20
netlabs
Palmar 2548=20
598 (2) 707 7687=20
ej...@ne...
|