Re: [Vectorlinux-devel] Installer news

[Masta M. <mas...@gm...>]

The import user button was grayed out. I had users from a previous STD
installation, it did not prompt of importing any, and since the button was
grayed out I could not manually import.

Also noticed that the installed user section seems to show only the upper
half. As far down as the top half of the import user button could be seen.

Clicking on the icon box to select a user icon, that looked well, but when I
finally got to KDM, nobody had any icons. I was able to put user icons using
KDE's system configuration, though. The user icons, by default, are turned
on in the kdmconfig, I did not see if it the icon path was set though.


On Mon, Jul 6, 2009 at 3:39 AM, Masta MCF <mas...@gm...> wrote:

> Time zone does not get set as configured by user in installer.
>  Looking in /etc/localtime file, it reads that "time zone needs to be set
> -- see zic manual". Run vasm, setup from there, then /etc/localtime shows
> the timezone as setup from vasm.
>
>
> On Mon, Jul 6, 2009 at 3:17 AM, Masta MCF <mas...@gm...> wrote:
>
>> Update. I failed to mention that I have the /home on a separate partition
>> that / . Layout is ["/", "swap", "/home"] . using vasm I created a new user
>> and he showed up in /home. checking into /etc/fstab partitions look normal
>> there, /home is where it should be.
>>
>>
>>
>> On Mon, Jul 6, 2009 at 3:05 AM, Masta MCF <mas...@gm...> wrote:
>>
>>> --- On Thu, 7/2/09, M0E Lnx <m0...@gm...> wrote:
>>>
>>> > From: M0E Lnx <m0...@gm...>
>>> > Subject: Re: [Vectorlinux-devel] Installer news
>>> > To: "Vector Linux developer's list" <
>>> vec...@li...>
>>> > Received: Thursday, July 2, 2009, 10:33 AM
>>> > I have fixed the cdrom source
>>> > detection problem.
>>> > Grabbed iso version 1.9.13 in the test dir, but that one
>>> > still has old
>>> > grub and there is no grub in the iso itself... so I need
>>> > that updated.
>>> >
>>> > Trying to figure out the passwords issue now.
>>>
>>> Tested A1.9.14. Seems that the user is not being fully installed. It is
>>> showing on the kdm menu, password works, but after entering from there is a
>>> no go. looking into /home dir, I noticed the user created has no directory
>>> in there. Doesn't seem to create that and copy the skel into it. I manually
>>> created a dir with the username, got rid of the / prompt, but then goes onto
>>> a "kstartupconfig4 does not exist or fails. The error code is 3. Check
>>> installation" . I assume that's because no skel being copied and/or kde4 is
>>> not creating it's own defaults?
>>>
>>>
>>
>