[Uuu-testing] test image 20020204-0001 :)

[Dave P. <ek...@vo...>]

I have a small test image, located at:

  [bzip2]
  http://void-core.2y.net/download/img-20020204-0001.bin.bz2

  [zip]
  http://void-core.2y.net/download/img-20020204-0001.bin.zip

* What to expect *

If all goes well, you should get a blue status bar on the top of the
screen displaying "[I] Test cell - for learning purposes" and a "0"
on the line just under.

It should stay like that for _exactly_ 5 seconds.  Then it should
go from 1 to 9, changing at _exactly_ each second.  When the count
reach 9, the status will display "[-] System tests completed..." and
lock.  There will not be anything else shown or whatever.

* What to check *

1.) See if you get to "[I] Test cell - for learning purposes"
2.) See if the "0" is displayed for 5 seconds.  It is uterly important
that you check the time as precisely as possible.  This will allow me
to make change in the programmation of the timer for the realtime
engine.
3.) See if after the 5 seconds the 0 start changing at a constant rate
of +1 per second.  Again, it is very important that you time this as
best as you can.  If the value is off even so slightly, please tell me.

* Where to report *

Send an email directly to me: in...@us...

* What to report *

1.) did the image worked like expected?
2.) were the timings exactly matching the real time?
    a.) 0 displayed for exactly 5 seconds?
    b.) increasing from 1 to 9 at +1 per second?

Thank you for taking the time to test :)
-- 
EKS - Dave Poirier                               (in...@us...)
"may the hairs on his toes never fall out"           http://uuu.sf.net/