I'm trying to use UrJTAG along with a custom cable and a USB Blaster to program the bootloader of a MPC85XX. When I convert the BSDL file to UrJTAG format, I get an error with the pin definition being non-compliant.
The exact error is:
error: -E- error: Line 400, Unsupported BSDL construct found.
error: -E- error: BSDL stage reported errors, aborting.
error: bsdl subsystem: Parser error, see log for details
I am not sure if there is even an error log, or if the error statement is the log?
I have tried different BSDL files from the MPC85XX family, and they all seem to have a problem with the
"(SD_REF_CLK, SD_REF_CLK_L))";
line under attribute:
"PORT_GROUPING of MPC8543 : entity is
"Differential_Voltage ("&".
I am not so familiar with BSDL formating, but I think it has to do with declaring the clock as part of a differential voltage grouping, which I am not sure how to work around with the UrJTAG format.
Any suggestions or help would be greatly appreciated.
Greetings All,
I'm trying to use UrJTAG along with a custom cable and a USB Blaster to program the bootloader of a MPC85XX. When I convert the BSDL file to UrJTAG format, I get an error with the pin definition being non-compliant.
The exact error is:
error: -E- error: Line 400, Unsupported BSDL construct found.
error: -E- error: BSDL stage reported errors, aborting.
error: bsdl subsystem: Parser error, see log for details
I am not sure if there is even an error log, or if the error statement is the log?
I have tried different BSDL files from the MPC85XX family, and they all seem to have a problem with the
"(SD_REF_CLK, SD_REF_CLK_L))";
line under attribute:
"PORT_GROUPING of MPC8543 : entity is
"Differential_Voltage ("&".
I am not so familiar with BSDL formating, but I think it has to do with declaring the clock as part of a differential voltage grouping, which I am not sure how to work around with the UrJTAG format.
Any suggestions or help would be greatly appreciated.
Cheers,
Kevin
Just updating, did some more work with debugging the definition file, but still have not solved the problem. Will update again with more results soon.
Thanks all,
Kevin
Any update to this? I'm interested in pulling and programming the flash on a board with this chip.