driver_win10_en

Back to Top
English | Japanese

How to configure URG identifier addition

When you need to install URG driver

When you connect a URG sensor of USB type in Windows10/11, automatically the default USB serial device driver is installed.
USB serial device (COM3) is installed in the example below, It is the device driver that the URG sensor communicates with.

The name of the driver does not become the URG,. However, it is still possible to use as it is.
Therefore, installing the URG driver is not always necessary.

If the URG driver is installed, in URGBenri the (URG) mark is attached to COM3,
If the standard USB serial device driver is installed, COM3 only would appear,.
In order to show the (URG) mark added to the device name, the URG driver should be installed.

How to install URG driver in Windows10/11

The standard procedure is essentially the same for both Windows 10 and Windows 11.

Disable Driver Signature Enforcement

As for Windows 8, to install the URG driver, it is need to disable driver signature enforcemen.
The procedure is as follows.
1. Open the "Settings" from the Start button on the desktop

2. Open the "updates and security" on Windows10, or the "system" on Windows11 from setting screen
Windows10

Windows11

3. Select the "recovery" in the update and the security screen (Windows10) or the system screen (Windows11), and then click on "restart now"
Windows10

Windows11

4. Click the "Troubleshooting" button in the options screen

5. Click the "Advanced Options" in troubleshooting screen

6. Click "Startup Settings" in the Advanced Options screen

7. Click the "restart" in the startup setting screen

8. After restarting, Press F7 key when the startup setting screen shows up

9. After restarting, the PC would be ready with Driver Signature Enforcement option disabled

Installation of URG driver

1. Open the settings from the Start button on the desktop
   
2. Open the device settings (Windows10) or the system (Windows11) from the configuration screen
   Windows10
   
   Windows11
   
3. On Windows 10, open the Device Manager on the device settings screen.
   On Windows 11, go to the "System" screen, click "About," and then open Device Manager.
   Windows10
   
   Windows11
   
4. Right-click on the USB serial device in Device Manager, then click the "Update Driver Software" button
   
5. Click the "Search for driver software by referring to the computer" in driver software update screen
   
6. Click on the "Choose from a list of device drivers on my computer."
   
7. Click the "Have Disk"
   
8. Click "Browse" and select the URG USB driver
   Please download it from URG_USB_DRIVER_Win_1491903685.zip If it is not ready.
   
9. A security warning shows up. Click "Install this driver software."
   
10. The Urg driver is now installed. It is possible to confirm that by checking the existance of the URG mark next to the device name in UrgBenri.