RE: [umlbuilder-devel] RE: Building umlbuilder from source

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Thanks for all the help. I got it to build and produced the =
umlbuilder-1.50.3.rpm.

I uninstalled the pre-built version, installed the one from my build, =
and used it to generate a RH8 distribution. Everything went fine until I =
tried to use the resulting filesystems with UML. UML refused to come up =
with the following errors:

*************************************************************************=
*
$ /home/agus/wrk/dws/prj/uml_fs_scripts/filesystems/redhat0800c/control =
start
172.16.7.3 being added to access control list
xhost:  must be on local machine to add or remove hosts.
Checking for the skas3 patch in the host...not found
Checking for /proc/mm...not found
tracing thread pid =3D 23917
Linux version 2.4.22-custom-5um (agus@redhat0800a) (gcc version 3.2 =
20020903 (Red Hat Linux 8.0 3.2-7)) #1 Fri Nov 14 13:19:54 PST 2003
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: umid=3Dredhat0800c ubd0=3Drootfs root=3D/dev/ubd0 =
ubd7=3Dswapfs mem=3D64m eth0=3Dtuntap,,,192.168.199.3 =
UML_XDISPLAY=3D192.168.199.6:0.0
Calibrating delay loop... 2590.13 BogoMIPS
Memory: 60948k available
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for host processor cmov support...Yes
Checking for host processor xmm support...No
Checking that ptrace can change system call numbers...OK
Checking that host ptys support output SIGIO...Yes
Checking that host ptys support SIGIO on close...No, enabling workaround
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rg...@at...)
devfs: boot_options: 0x1
JFFS version 1.0, (C) 1999, 2000  Axis Communications AB
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis =
Communications AB.
pty: 256 Unix98 ptys configured
SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=3D256).
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
PPP generic driver version 2.4.2
Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky
SCSI subsystem driver Revision: 1.00
scsi0 : scsi_debug, Version: 0.61 (20020815), num_devs=3D1, =
dev_size_mb=3D8, opts=3D0x0
  Vendor: Linux     Model: scsi_debug        Rev: 0004
  Type:   Direct-Access                      ANSI SCSI revision: 03
blkmtd: error: missing `device' name

Initializing software serial port version 1
mconsole (version 2) initialized on /home/agus/.uml/redhat0800c/mconsole
Partition check:
 ubda: unknown partition table
 ubdh: unknown partition table
UML Audio Relay (host dsp =3D /dev/sound/dsp, host mixer =3D =
/dev/sound/mixer)
Initializing stdio console driver
Netdevice 0 : TUN/TAP backend - IP =3D 192.168.199.3
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
EXT2-fs warning (device ubd(98,0)): ext2_read_super: mounting ext3 =
filesystem as ext2

VFS: Mounted root (ext2 filesystem) readonly.
mount_devfs_fs(): unable to mount devfs, err: -2
Warning: unable to open an initial console.
Kernel panic: No init found.  Try passing init=3D option to kernel.
*************************************************************************=
*

Thanks for all the help.

Agus

-----Original Message-----
From:	Roger Binns [mailto:ro...@ro...]
Sent:	Fri 11/14/2003 17:05
To:	uml...@li...
Cc:=09
Subject:	Re: [umlbuilder-devel] RE: Building umlbuilder from source
> there are 2 files that the script thinks are missing. For each of =
those 2 files, I hit
> the Enter key twice to skip it. Here are the traces from the two =
files: =20

They are both documentation files which aren't in the  the src-1 file.
I just skip those two patches as you did since it is pointless adding =
the
doc source file just to let them pass.

> You mentioned about the rpms for Redhat 9 in your previous reply.
>  I don't quite understand. Can you please elaborate. Do I need
> to create /space/distros/RPMS-rh90 and copy all Redhat 9 rpms into =
that directory?=20

Yes.  The miniroot builds initial ramdisks, installs modules and can
resize filesystems (it creates a new one and copies content across).
You won't need the rpms for Gnome, KDE, X, admin tools etc but it
will need the filesystem ones, the initrd shells etc.

Roger

-------------------------------------------------------
This SF. Net email is sponsored by: GoToMyPC
GoToMyPC is the fast, easy and secure way to access your computer from
any Web browser or wireless device. Click here to Try it Free!
https://www.gotomypc.com/tr/OSDN/AW/Q4_2003/t/g22lp?Target=3Dmm/g22lp.tmp=
l
_______________________________________________
umlbuilder-devel mailing list
uml...@li...
https://lists.sourceforge.net/lists/listinfo/umlbuilder-devel