|
From: Jeffrey N. <nel...@ma...> - 2011-05-28 05:17:47
|
I received my board r-217 and pogoprog in and soldered it together yesterday. When I plug it in, nothing gets hot (yay) and the RST light turns on. After using the pogoprog to program the blinky hex file onto it, the TX, RX, and USR LEDs blink, but when I unplug the device and plug it back in, the only led that lights up is the RST light. Shouldn't this hex file boot each time every time the thing is plugged in? I'm guessing there is a boot select line that needs to get pulled up/down that isn't but I am missing this in the datasheet. Anybody know which this is? Thanks, Jeff |