trustedjava-support

[Trustedjava-support] Bind with SunJCE RSAPublicKey-Unbind with JTSS problem

[Arshad N. <ars...@st...>]

Hi,

Recently started testing native JTSS 0.41.  All tests pass on my
system (JDK6U15 64-bit on CentOS 5.3; TPM is an STM 1.2.4.30).

When I try to encrypt data or a symmetric key (using SunJCE) with
an RSAPublicKey (whose Bind Key was generated in the TPM) and
decrypt the ciphertext with the Bind Key in the TPM, I run into
the following exception consistently:

---------------------
iaik.tc.tss.api.exceptions.tcs.TcTpmException:

TSS Error:
error layer:                0x00 (TPM)
error code (without layer): 0x21
error code (full):          0x21
error message: The decryption process did not complete.

         at 
iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdCommon.handleRetCode(TcTpmCmdCommon.java:73)
         at 
iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdStorage.TpmUnBind(TcTpmCmdStorage.java:244)
         at 
iaik.tc.tss.impl.java.tcs.tcsi.TcTcsi.TcsipUnBind(TcTcsi.java:1638)
         at 
iaik.tc.tss.impl.java.tsp.tcsbinding.local.TcTcsBindingLocal.TcsipUnBind(TcTcsBindingLocal.java:442)
         at 
iaik.tc.tss.impl.java.tsp.internal.TcTspInternal.TspUnBind_Internal(TcTspInternal.java:1766)
         at iaik.tc.tss.impl.java.tsp.TcEncData.unbind(TcEncData.java:221)
         at 
jtss.BindDataWithJCEUnbindWithTPM.main(BindDataWithJCEUnbindWithTPM.java:97)
---------------------

I presume that it should be possible to do what I'm doing; I
didn't see anything that might otherwise indicate that it was
not possible.  Here is the relevant section of the code that
I'm using; it is the unbind() method that causes the problem:

------------------------
String plaintext = "To be....or not to be; that is the question!";
Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding");
cipher.init(Cipher.ENCRYPT_MODE, rsabindkey);
byte[] ciphertext = cipher.doFinal(plaintext.getBytes());
TcIEncData encdataobject =
	tpmctx.createEncDataObject(TcTssConstants.TSS_ENCDATA_BIND);
encdataobject.setAttribData(TcTssConstants.TSS_TSPATTRIB_ENCDATA_BLOB,
	TcTssConstants.TSS_TSPATTRIB_ENCDATABLOB_BLOB,
	TcBlobData.newByteArray(ciphertext));
bindkey.loadKey(srk);
TcBlobData ptobject = encdataobject.unbind(bindkey);
------------------------

I get the same exception even if I use "NoPadding" in my
cipher's transform.

Thanks for your help.

Arshad Noor
StrongAuth, Inc.

Re: [Trustedjava-support] Bind with SunJCE RSAPublicKey-Unbind with JTSS problem

[Ronald T. <ron...@ia...>]

Hi,

The data you bind must be encrypted in a tdTPM_BOUND_DATA structure, the 
definition of which can be found in the TPM specifications.

Ronald

Arshad Noor wrote:
> Hi,
>
> Recently started testing native JTSS 0.41.  All tests pass on my
> system (JDK6U15 64-bit on CentOS 5.3; TPM is an STM 1.2.4.30).
>
> When I try to encrypt data or a symmetric key (using SunJCE) with
> an RSAPublicKey (whose Bind Key was generated in the TPM) and
> decrypt the ciphertext with the Bind Key in the TPM, I run into
> the following exception consistently:
>
> ---------------------
> iaik.tc.tss.api.exceptions.tcs.TcTpmException:
>
> TSS Error:
> error layer:                0x00 (TPM)
> error code (without layer): 0x21
> error code (full):          0x21
> error message: The decryption process did not complete.
>
>          at 
> iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdCommon.handleRetCode(TcTpmCmdCommon.java:73)
>          at 
> iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdStorage.TpmUnBind(TcTpmCmdStorage.java:244)
>          at 
> iaik.tc.tss.impl.java.tcs.tcsi.TcTcsi.TcsipUnBind(TcTcsi.java:1638)
>          at 
> iaik.tc.tss.impl.java.tsp.tcsbinding.local.TcTcsBindingLocal.TcsipUnBind(TcTcsBindingLocal.java:442)
>          at 
> iaik.tc.tss.impl.java.tsp.internal.TcTspInternal.TspUnBind_Internal(TcTspInternal.java:1766)
>          at iaik.tc.tss.impl.java.tsp.TcEncData.unbind(TcEncData.java:221)
>          at 
> jtss.BindDataWithJCEUnbindWithTPM.main(BindDataWithJCEUnbindWithTPM.java:97)
> ---------------------
>
> I presume that it should be possible to do what I'm doing; I
> didn't see anything that might otherwise indicate that it was
> not possible.  Here is the relevant section of the code that
> I'm using; it is the unbind() method that causes the problem:
>
> ------------------------
> String plaintext = "To be....or not to be; that is the question!";
> Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding");
> cipher.init(Cipher.ENCRYPT_MODE, rsabindkey);
> byte[] ciphertext = cipher.doFinal(plaintext.getBytes());
> TcIEncData encdataobject =
> 	tpmctx.createEncDataObject(TcTssConstants.TSS_ENCDATA_BIND);
> encdataobject.setAttribData(TcTssConstants.TSS_TSPATTRIB_ENCDATA_BLOB,
> 	TcTssConstants.TSS_TSPATTRIB_ENCDATABLOB_BLOB,
> 	TcBlobData.newByteArray(ciphertext));
> bindkey.loadKey(srk);
> TcBlobData ptobject = encdataobject.unbind(bindkey);
> ------------------------
>
> I get the same exception even if I use "NoPadding" in my
> cipher's transform.
>
> Thanks for your help.
>
> Arshad Noor
> StrongAuth, Inc.
>
>   


-- 
Dipl.-Ing. Ronald Tögl          phone +43 316/873-5502
Trusted Computing Labs          fax   +43 316/873-5520
IAIK                            ron...@ia...
Graz University of Technology   http://www.iaik.tugraz.at

Re: [Trustedjava-support] Bind with SunJCE RSAPublicKey-Unbind with JTSS problem

[Arshad N. <ars...@st...>]

Hi Ronald,

Thanks for the pointer, but I'm afraid I'm missing the connection.

I've reviewed the TCG Sec on tdTPM_BOUND_DATA and understand what
the 1-pager says; but what I'm missing is how does the TcIEncData's
unbind(TcIRsakey) method use it.  Your examples in the JUnit source
do not use the TcTpmBoundData structure, so I'm missing the link.

While I understand that the bind() operation in TcIEncData probably
creates the BoundData object internally and can therefore unbind it,
I'm not sure how to pass the TcTpmBoundData structure to the
TcIEncData object for the unbind() operation.  Perhaps a few lines
of code will illuminate this better.

Thanks.

Arshad Noor
StrongAuth, Inc.

Ronald Tögl wrote:
> Hi,
> 
> The data you bind must be encrypted in a tdTPM_BOUND_DATA structure, the 
> definition of which can be found in the TPM specifications.
> 
> Ronald
> 
> Arshad Noor wrote:
>> Hi,
>>
>> Recently started testing native JTSS 0.41.  All tests pass on my
>> system (JDK6U15 64-bit on CentOS 5.3; TPM is an STM 1.2.4.30).
>>
>> When I try to encrypt data or a symmetric key (using SunJCE) with
>> an RSAPublicKey (whose Bind Key was generated in the TPM) and
>> decrypt the ciphertext with the Bind Key in the TPM, I run into
>> the following exception consistently:
>>
>> ---------------------
>> iaik.tc.tss.api.exceptions.tcs.TcTpmException:
>>
>> TSS Error:
>> error layer:                0x00 (TPM)
>> error code (without layer): 0x21
>> error code (full):          0x21
>> error message: The decryption process did not complete.
>>
>>          at 
>> iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdCommon.handleRetCode(TcTpmCmdCommon.java:73) 
>>
>>          at 
>> iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdStorage.TpmUnBind(TcTpmCmdStorage.java:244) 
>>
>>          at 
>> iaik.tc.tss.impl.java.tcs.tcsi.TcTcsi.TcsipUnBind(TcTcsi.java:1638)
>>          at 
>> iaik.tc.tss.impl.java.tsp.tcsbinding.local.TcTcsBindingLocal.TcsipUnBind(TcTcsBindingLocal.java:442) 
>>
>>          at 
>> iaik.tc.tss.impl.java.tsp.internal.TcTspInternal.TspUnBind_Internal(TcTspInternal.java:1766) 
>>
>>          at 
>> iaik.tc.tss.impl.java.tsp.TcEncData.unbind(TcEncData.java:221)
>>          at 
>> jtss.BindDataWithJCEUnbindWithTPM.main(BindDataWithJCEUnbindWithTPM.java:97) 
>>
>> ---------------------
>>
>> I presume that it should be possible to do what I'm doing; I
>> didn't see anything that might otherwise indicate that it was
>> not possible.  Here is the relevant section of the code that
>> I'm using; it is the unbind() method that causes the problem:
>>
>> ------------------------
>> String plaintext = "To be....or not to be; that is the question!";
>> Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding");
>> cipher.init(Cipher.ENCRYPT_MODE, rsabindkey);
>> byte[] ciphertext = cipher.doFinal(plaintext.getBytes());
>> TcIEncData encdataobject =
>>     tpmctx.createEncDataObject(TcTssConstants.TSS_ENCDATA_BIND);
>> encdataobject.setAttribData(TcTssConstants.TSS_TSPATTRIB_ENCDATA_BLOB,
>>     TcTssConstants.TSS_TSPATTRIB_ENCDATABLOB_BLOB,
>>     TcBlobData.newByteArray(ciphertext));
>> bindkey.loadKey(srk);
>> TcBlobData ptobject = encdataobject.unbind(bindkey);
>> ------------------------
>>
>> I get the same exception even if I use "NoPadding" in my
>> cipher's transform.
>>
>> Thanks for your help.
>>
>> Arshad Noor
>> StrongAuth, Inc.
>>
>>   
> 
> 

Re: [Trustedjava-support] Bind with SunJCE RSAPublicKey-Unbind with JTSS problem

[Arshad N. <ars...@st...>]

Looking through the source of various objects, I added the
following code to the test to explicitly set the values in
the TcTpmBoundData object:

-----------
*TcTpmStructVer ver = new TcTpmStructVer();
ver.setMajor((short) 1);
ver.setMinor((short) 1);
ver.setRevMajor((short) 0);
ver.setRevMinor((short) 0);
TcTpmBoundData boundata = new TcTpmBoundData();
boundata.setVer(ver);
boundata.setPayload(TcTpmConstants.TPM_PT_BIND);
boundata.setPayloadData(TcBlobData.newByteArray(ciphertext));*

TcIEncData encdataobject =
	tpmctx.createEncDataObject(TcTssConstants.TSS_ENCDATA_BIND);
encdataobject.setAttribData(TcTssConstants.TSS_TSPATTRIB_ENCDATA_BLOB,
	TcTssConstants.TSS_TSPATTRIB_ENCDATABLOB_BLOB,
	*boundata.getEncoded()*);
bindkey.loadKey(srk);
TcBlobData ptobject = encdataobject.unbind(bindkey);
-----------

Unfortunately, the result is the same; same exception at the
same location in the code.  Hopefully, you'll provide some
direction, Ronald.  Thanks.

Arshad Noor
StrongAuth, Inc.


Arshad Noor wrote:
> Hi Ronald,
> 
> Thanks for the pointer, but I'm afraid I'm missing the connection.
> 
> I've reviewed the TCG Sec on tdTPM_BOUND_DATA and understand what
> the 1-pager says; but what I'm missing is how does the TcIEncData's
> unbind(TcIRsakey) method use it.  Your examples in the JUnit source
> do not use the TcTpmBoundData structure, so I'm missing the link.
> 
> While I understand that the bind() operation in TcIEncData probably
> creates the BoundData object internally and can therefore unbind it,
> I'm not sure how to pass the TcTpmBoundData structure to the
> TcIEncData object for the unbind() operation.  Perhaps a few lines
> of code will illuminate this better.
> 
> Thanks.
> 
> Arshad Noor
> StrongAuth, Inc.
> 
> Ronald Tögl wrote:
>> Hi,
>>
>> The data you bind must be encrypted in a tdTPM_BOUND_DATA structure, the 
>> definition of which can be found in the TPM specifications.
>>
>> Ronald
>>
>> Arshad Noor wrote:
>>> Hi,
>>>
>>> Recently started testing native JTSS 0.41.  All tests pass on my
>>> system (JDK6U15 64-bit on CentOS 5.3; TPM is an STM 1.2.4.30).
>>>
>>> When I try to encrypt data or a symmetric key (using SunJCE) with
>>> an RSAPublicKey (whose Bind Key was generated in the TPM) and
>>> decrypt the ciphertext with the Bind Key in the TPM, I run into
>>> the following exception consistently:
>>>
>>> ---------------------
>>> iaik.tc.tss.api.exceptions.tcs.TcTpmException:
>>>
>>> TSS Error:
>>> error layer:                0x00 (TPM)
>>> error code (without layer): 0x21
>>> error code (full):          0x21
>>> error message: The decryption process did not complete.
>>>
>>>          at 
>>> iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdCommon.handleRetCode(TcTpmCmdCommon.java:73) 
>>>
>>>          at 
>>> iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdStorage.TpmUnBind(TcTpmCmdStorage.java:244) 
>>>
>>>          at 
>>> iaik.tc.tss.impl.java.tcs.tcsi.TcTcsi.TcsipUnBind(TcTcsi.java:1638)
>>>          at 
>>> iaik.tc.tss.impl.java.tsp.tcsbinding.local.TcTcsBindingLocal.TcsipUnBind(TcTcsBindingLocal.java:442) 
>>>
>>>          at 
>>> iaik.tc.tss.impl.java.tsp.internal.TcTspInternal.TspUnBind_Internal(TcTspInternal.java:1766) 
>>>
>>>          at 
>>> iaik.tc.tss.impl.java.tsp.TcEncData.unbind(TcEncData.java:221)
>>>          at 
>>> jtss.BindDataWithJCEUnbindWithTPM.main(BindDataWithJCEUnbindWithTPM.java:97) 
>>>
>>> ---------------------
>>>
>>> I presume that it should be possible to do what I'm doing; I
>>> didn't see anything that might otherwise indicate that it was
>>> not possible.  Here is the relevant section of the code that
>>> I'm using; it is the unbind() method that causes the problem:
>>>
>>> ------------------------
>>> String plaintext = "To be....or not to be; that is the question!";
>>> Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding");
>>> cipher.init(Cipher.ENCRYPT_MODE, rsabindkey);
>>> byte[] ciphertext = cipher.doFinal(plaintext.getBytes());
>>> TcIEncData encdataobject =
>>>     tpmctx.createEncDataObject(TcTssConstants.TSS_ENCDATA_BIND);
>>> encdataobject.setAttribData(TcTssConstants.TSS_TSPATTRIB_ENCDATA_BLOB,
>>>     TcTssConstants.TSS_TSPATTRIB_ENCDATABLOB_BLOB,
>>>     TcBlobData.newByteArray(ciphertext));
>>> bindkey.loadKey(srk);
>>> TcBlobData ptobject = encdataobject.unbind(bindkey);
>>> ------------------------
>>>
>>> I get the same exception even if I use "NoPadding" in my
>>> cipher's transform.
>>>
>>> Thanks for your help.
>>>
>>> Arshad Noor
>>> StrongAuth, Inc.
>>>
>>>   
>>
> 
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
> trial. Simplify your report design, integration and deployment - and focus on 
> what you do best, core application coding. Discover what's new with 
> Crystal Reports now.  http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Trustedjava-support mailing list
> Tru...@li...
> https://lists.sourceforge.net/lists/listinfo/trustedjava-support

Re: [Trustedjava-support] Bind with SunJCE RSAPublicKey-Unbind with JTSS problem

[Arshad N. <ars...@st...>]

Halleleujah!  I figured it out.

I, obviously, misunderstood your response, Ronald (although I will
admit that your response was cryptic) :-)

Once I pored through various source files, I was finally able to
solve this.  For those who are interested in the solution, here is
the snippet of code that worked:

---------------------
// Setup BoundData object
String plaintext = "To be....or not to be; that is the question!";
TcTpmBoundData boundata = new TcTpmBoundData();
boundata.setVer(TcTpmStructVer.TPM_V1_1);
boundata.setPayload(TcTpmConstants.TPM_PT_BIND); 
boundata.setPayloadData(TcBlobData.newByteArray(plaintext.getBytes("UTF-16LE")));
System.out.println("Original plaintext data: " + plaintext);

// Encrypt with JCE Cipher and parameters
OAEPParameterSpec oaepspec = new OAEPParameterSpec("SHA1", "MGF1",
         new MGF1ParameterSpec("SHA1"),
	new PSource.PSpecified("TCPA".getBytes("ASCII")));
Cipher cipher = ipher.getInstance("RSA/ECB/OAEPWithSHA1AndMGF1Padding");
cipher.init(Cipher.ENCRYPT_MODE, rsabindkey, oaepspec);
byte[] ciphertext = cipher.doFinal(boundata.getEncoded().asByteArray());
System.out.println("Encrypted data: " +
	new String(Base64.encode(ciphertext)));

// Setup EncData object for unbinding (decryption)
TcIEncData encdataobject =
	tpmctx.createEncDataObject(TcTssConstants.TSS_ENCDATA_BIND); 
  encdataobject.setAttribData(TcTssConstants.TSS_TSPATTRIB_ENCDATA_BLOB,
	TcTssConstants.TSS_TSPATTRIB_ENCDATABLOB_BLOB,
	TcBlobData.newByteArray(ciphertext));

// Load bind key (with the SRK reference to decrypt bindkey)
bindkey.loadKey(srk);

// Decrypt the data
TcBlobData ptobject = encdataobject.unbind(bindkey);

// Display the decrypted plaintext
System.out.println("Decrypted data: " + ptobject.toString());
---------------------

Thanks for the pointer, Ronald.  In the final analysis, it did
lead me to the answer.

This was fun! :-)

Arshad Noor
StrongAuth, Inc.

Arshad Noor wrote:
> Looking through the source of various objects, I added the
> following code to the test to explicitly set the values in
> the TcTpmBoundData object:
> 
> -----------
> *TcTpmStructVer ver = new TcTpmStructVer();
> ver.setMajor((short) 1);
> ver.setMinor((short) 1);
> ver.setRevMajor((short) 0);
> ver.setRevMinor((short) 0);
> TcTpmBoundData boundata = new TcTpmBoundData();
> boundata.setVer(ver);
> boundata.setPayload(TcTpmConstants.TPM_PT_BIND);
> boundata.setPayloadData(TcBlobData.newByteArray(ciphertext));*
> 
> TcIEncData encdataobject =
> 	tpmctx.createEncDataObject(TcTssConstants.TSS_ENCDATA_BIND);
> encdataobject.setAttribData(TcTssConstants.TSS_TSPATTRIB_ENCDATA_BLOB,
> 	TcTssConstants.TSS_TSPATTRIB_ENCDATABLOB_BLOB,
> 	*boundata.getEncoded()*);
> bindkey.loadKey(srk);
> TcBlobData ptobject = encdataobject.unbind(bindkey);
> -----------
> 
> Unfortunately, the result is the same; same exception at the
> same location in the code.  Hopefully, you'll provide some
> direction, Ronald.  Thanks.
> 
> Arshad Noor
> StrongAuth, Inc.
> 
> 
> Arshad Noor wrote:
>> Hi Ronald,
>>
>> Thanks for the pointer, but I'm afraid I'm missing the connection.
>>
>> I've reviewed the TCG Sec on tdTPM_BOUND_DATA and understand what
>> the 1-pager says; but what I'm missing is how does the TcIEncData's
>> unbind(TcIRsakey) method use it.  Your examples in the JUnit source
>> do not use the TcTpmBoundData structure, so I'm missing the link.
>>
>> While I understand that the bind() operation in TcIEncData probably
>> creates the BoundData object internally and can therefore unbind it,
>> I'm not sure how to pass the TcTpmBoundData structure to the
>> TcIEncData object for the unbind() operation.  Perhaps a few lines
>> of code will illuminate this better.
>>
>> Thanks.
>>
>> Arshad Noor
>> StrongAuth, Inc.
>>
>> Ronald Tögl wrote:
>>> Hi,
>>>
>>> The data you bind must be encrypted in a tdTPM_BOUND_DATA structure, the 
>>> definition of which can be found in the TPM specifications.
>>>
>>> Ronald
>>>
>>> Arshad Noor wrote:
>>>> Hi,
>>>>
>>>> Recently started testing native JTSS 0.41.  All tests pass on my
>>>> system (JDK6U15 64-bit on CentOS 5.3; TPM is an STM 1.2.4.30).
>>>>
>>>> When I try to encrypt data or a symmetric key (using SunJCE) with
>>>> an RSAPublicKey (whose Bind Key was generated in the TPM) and
>>>> decrypt the ciphertext with the Bind Key in the TPM, I run into
>>>> the following exception consistently:
>>>>
>>>> ---------------------
>>>> iaik.tc.tss.api.exceptions.tcs.TcTpmException:
>>>>
>>>> TSS Error:
>>>> error layer:                0x00 (TPM)
>>>> error code (without layer): 0x21
>>>> error code (full):          0x21
>>>> error message: The decryption process did not complete.
>>>>
>>>>          at 
>>>> iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdCommon.handleRetCode(TcTpmCmdCommon.java:73) 
>>>>
>>>>          at 
>>>> iaik.tc.tss.impl.java.tcs.pbg.TcTpmCmdStorage.TpmUnBind(TcTpmCmdStorage.java:244) 
>>>>
>>>>          at 
>>>> iaik.tc.tss.impl.java.tcs.tcsi.TcTcsi.TcsipUnBind(TcTcsi.java:1638)
>>>>          at 
>>>> iaik.tc.tss.impl.java.tsp.tcsbinding.local.TcTcsBindingLocal.TcsipUnBind(TcTcsBindingLocal.java:442) 
>>>>
>>>>          at 
>>>> iaik.tc.tss.impl.java.tsp.internal.TcTspInternal.TspUnBind_Internal(TcTspInternal.java:1766) 
>>>>
>>>>          at 
>>>> iaik.tc.tss.impl.java.tsp.TcEncData.unbind(TcEncData.java:221)
>>>>          at 
>>>> jtss.BindDataWithJCEUnbindWithTPM.main(BindDataWithJCEUnbindWithTPM.java:97) 
>>>>
>>>> ---------------------
>>>>
>>>> I presume that it should be possible to do what I'm doing; I
>>>> didn't see anything that might otherwise indicate that it was
>>>> not possible.  Here is the relevant section of the code that
>>>> I'm using; it is the unbind() method that causes the problem:
>>>>
>>>> ------------------------
>>>> String plaintext = "To be....or not to be; that is the question!";
>>>> Cipher cipher = Cipher.getInstance("RSA/ECB/PKCS1Padding");
>>>> cipher.init(Cipher.ENCRYPT_MODE, rsabindkey);
>>>> byte[] ciphertext = cipher.doFinal(plaintext.getBytes());
>>>> TcIEncData encdataobject =
>>>>     tpmctx.createEncDataObject(TcTssConstants.TSS_ENCDATA_BIND);
>>>> encdataobject.setAttribData(TcTssConstants.TSS_TSPATTRIB_ENCDATA_BLOB,
>>>>     TcTssConstants.TSS_TSPATTRIB_ENCDATABLOB_BLOB,
>>>>     TcBlobData.newByteArray(ciphertext));
>>>> bindkey.loadKey(srk);
>>>> TcBlobData ptobject = encdataobject.unbind(bindkey);
>>>> ------------------------
>>>>
>>>> I get the same exception even if I use "NoPadding" in my
>>>> cipher's transform.
>>>>
>>>> Thanks for your help.
>>>>
>>>> Arshad Noor
>>>> StrongAuth, Inc.
>>>>
>>>>   
>> ------------------------------------------------------------------------------
>> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
>> trial. Simplify your report design, integration and deployment - and focus on 
>> what you do best, core application coding. Discover what's new with 
>> Crystal Reports now.  http://p.sf.net/sfu/bobj-july
>> _______________________________________________
>> Trustedjava-support mailing list
>> Tru...@li...
>> https://lists.sourceforge.net/lists/listinfo/trustedjava-support
> 
> ------------------------------------------------------------------------------
> Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day 
> trial. Simplify your report design, integration and deployment - and focus on 
> what you do best, core application coding. Discover what's new with 
> Crystal Reports now.  http://p.sf.net/sfu/bobj-july
> _______________________________________________
> Trustedjava-support mailing list
> Tru...@li...
> https://lists.sourceforge.net/lists/listinfo/trustedjava-support