Re: [Trustedjava-support] (Windows) Running the TCS daemon directly without installing the service?

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

Hi,

Likely there is an issue with the TPM Base Services or their interaction 
with our bridge-dll. (jTssTddlVista.dll just opens a channel to the MS 
TPM base service, which then talks to the driver/device)

Actually, I don't believe that the TPM driver and services are active in 
Windows PE at all (we never tried this). According to
  http://technet.microsoft.com/en-us/library/hh824926.aspx
you'll need to include those as extras in your PE configuration.

Note that just starting the TCS daemon does not trigger any TPM access, 
only using it will open the driver.

However, also a missing VC redistribution will cause a similar error.

Ronald

On 07/02/2014 11:01 PM, Matthew Galligan wrote:
> Looking at the source briefly, I pulled out the jTssTddlVista.dll and 
> threw them in the lib paths without much success. It is odd, this may 
> be related to the VC redist, as the relevant JAR is in the path, and I 
> am unsure why it can't load. I'll make sure my vc redist is working 
> and try again.
>
>
> On Tue, Jul 1, 2014 at 4:08 PM, Matthew Galligan 
> <mat...@gm... <mailto:mat...@gm...>> wrote:
>
>     Hello,
>
>     I have a use case where I need to do a one-time encryption of
>     something on a lot of workstations (2000+) and was hoping to run
>     the TCS daemon directly from command line for this so that I could
>     avoid permanently installing jTSS on all of these machines. I
>     periodically boot to another partition on these machines that has
>     jTSS installed.
>
>     In Windows, I have run the following (wild guess so probably
>     pretty wrong):
>
>     java -cp
>     .;C:\PROGRA~1\jTSS\soap\..\lib\iaik_jtss_tsp_tests.jar;C:\PROGRA~1\jTSS\soap\..\lib\iaik_jtss_tsp_soap.jar;C:\PROGRA~1\jTSS\soap\..\lib\iaik_jtss_tsp.jar;C:\PROGRA~1\jTSS\soap\..\lib\iaik_jtss_tcs_soap.jar;C:\PROGRA~1\jTSS\soap\..\lib\iaik_jtss_tcs.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\hsqldbmin.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\junit.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\xerces.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\wsdl4j-1.5.1.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\saaj.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\mail.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\log4j-1.2.8.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\jaxrpc.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\commons-logging-1.0.4.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\commons-discovery-0.2.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\commons-daemon.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\axis.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\axis-ant.jar;C:\PROGRA~1\jTSS\soap\..\ext_libs\activation.jar
>     -Djtss.tsp.ini.file=C:\PROGRA~1\jTSS\soap\..\lib\ini\jtss_tsp.ini
>     -Djtss.tcs.ini.file=C:\PROGRA~1\jTSS\soap\..\lib\ini\jtss_tcs.ini
>     iaik.tc.tss.impl.java.tcs.soapservice.server.StartAxisServerWindows
>
>     I copied the classpath out of the service properties and I get the
>     following output:
>
>     10:23:08:434 [INFO] StartAxisServerWindows::setupServer (81):
>     Initializing the
>      AXIS server
>     10:23:08:512 [INFO] StartAxisServerWindows::setupServer (87):  
>     AXIS server succ
>     essfully initialized
>     10:23:08:730 [INFO] StartAxisServerWindows::startServer (98):  
>     Try to start the
>      AXIS server
>     10:23:08:730 [INFO] StartAxisServerWindows::startServer (101):
>      AXIS server succ
>     essfully started
>     - starting up SimpleAxisServer on port 30004 (C:\Program
>     Files\jTSS\lib)
>
>
>     However, when I run jtt I get the following:
>       ---------------------
>        IAIK Java TPM Tools
>       ---------------------
>     10:32:16:878 [ERROR] TcTcsBindingSoap::connect (116):   There
>     seems no TCS runni
>     ng
>     10:32:16:893 [ERROR] TcTcsBindingSoap::connect (116):   There
>     seems no TCS runni
>     ng
>     iaik.tc.tss.api.exceptions.tsp.TcTspException:
>
>     TSS Error:
>     error layer:                0x3000 (TSP)
>     error code (without layer): 0x0103
>     error code (full):          0x3103
>     error message: Core Service connection failed.
>
>             at
>     iaik.tc.tss.impl.java.tsp.tcsbinding.soapservice.TcTcsBindingSoap.con
>     nect(TcTcsBindingSoap.java:117)
>             at
>     iaik.tc.tss.impl.java.tsp.internal.TcTspInternal.TspContextConnect_In
>     ternal(TcTspInternal.java:368)
>             at
>     iaik.tc.tss.impl.java.tsp.TcContext.connect(TcContext.java:174)
>             at iaik.tc.apps.jtt.tpm.TpmVersion.execute(TpmVersion.java:68)
>             at iaik.tc.utils.cmdline.SubCommand.run(SubCommand.java:69)
>             at
>     iaik.tc.utils.cmdline.SubCommandParser.parse(SubCommandParser.java:41
>     )
>             at iaik.tc.apps.JTpmTools.main(JTpmTools.java:224)
>
>     I've noticed the same behavior when running the daemon on linux.
>
>
>
>
> ------------------------------------------------------------------------------
> Open source business process management suite built on Java and Eclipse
> Turn processes into business applications with Bonita BPM Community Edition
> Quickly connect people, data, and systems into organized workflows
> Winner of BOSSIE, CODIE, OW2 and Gartner awards
> http://p.sf.net/sfu/Bonitasoft
>
>
> _______________________________________________
> Trustedjava-support mailing list
> Tru...@li...
> https://lists.sourceforge.net/lists/listinfo/trustedjava-support

-- 
Dr. Ronald Tögl                 phone +43 316/873-5502
Secure and Correct Systems      fax   +43 316/873-5520
IAIK                            ron...@ia...
Graz University of Technology   http://www.iaik.tugraz.at