An update, I loaded cdrom.tgz onto the PCMCIA boot disk, and edited the =
floppy/tux/config/pgklist to include cdrom
This time it looks as though it was going to start, but got stuck on the =
cardmgr portion of the pcmcia startup, well didn't get stuck, but I think =
there may be a typo there
it goes like this
***************
Starting PCMCIA card services
Linux PCMCIA Card Services 3.1.26
kernel build 2.4.5 #2 Sat Jun 16 21:19:32 /etc/localtime 2001
options: [pci] [cardbus]
Intel PCIC probe:
Intel i82365sl B step rev 00 ISA-to-PCMICA at port 0x3e0 ofs 0x00
host opts [0]: none
host opts [1]: none
ISA irqs (scanned) =3D 3,4,5,7,9,10,12,15 status change on irq 15
Waiting for kernel modules to settle...
Starting cardmgr....
cardmgr[147]: starting, version is 3.1.26
cardmgr[147]: watching 2 sockets
cardmgr[147]: initalizing socket 0
cs: memory probe 0x0d0000-0x0dffff: clean.
cardmgr[147]: socket 0: Ninja ATA
Waiting some more....
cardmgr[147]: module /lib/modules/2.4.5/pcmcia/ide_cs.o not avalable
cardmgr[147]: executing: 'modprobe ide_cs'
cardmgr[147]: modprobe exited with status 2
cardmgr[147]: get dev info on socket 0 failed: Resource temporarily =
unavailable
**********************************
I hope this helps someone figure out what I am doing wrong, or what can be =
done to fix this.
Thank you.
/aaron
Doesn't have a CD-ROM. have a Sony PCMCIA CD-ROM, would like to get trinux =
to be able to access that.
seem to have gotten trinux to see the PCMCIA slots, by manually loading =
the PCMCIA stuff, and the chip set.=20
my lsmod is like this
Module
cb_enabler
ds
i82365
pcmcia_core
What else do I need to load to be able to access the CD-ROM?
if I have loaded it all, how do I access it all?
Thank you very much.
/aaron
Aaron Steele
Systems Administrator
ITD - DePaul University
773-325-7344
ast...@de...
Aaron Steele
Systems Administrator
ITD - DePaul University
773-325-7344
ast...@de...
|
