> Well, I have not tried the ftp-server, I use an http-server locally.
> Works wonderfull.
> My trinux boot floppy has the following in /tux/config/server:
> http://192.168.0.254/
>
> # http://www.trinux.org/pkg/
>
> # http://www.io.com/~mdfranz/trinux/pkg/
>
> and following in /tux/config/master, gateway and dns:
> 192.168.0.254
> and following in /tux/config/local:
> http://192.168.0.254/
What are the 'master' and 'local' files for? I've not modified them.
I messed around with moving the FTP site over onto HTTP, and now the
packages load beautifully. But I wonder.
How is it that with only 128 MB RAM, you can load all of these packages in?
Do they just occupy RAM? Is there a limit to the number of packages that
can be loaded into a system..? I wonder how it works.
>
> and following in /tux/config/eth0:
> 192.168.0.2 255.255.255.0
>
> This works for me.
> I don't know if it's correct, but it works for me this way. I don't
> change anything anymore in those files :-)
> My local server (= 192.168.0.254) has /trinux/packages as root. I
> found this by trying, there is certainly a lack of documentation on
> this matter :-( /tux/config/readme is scrambled btw, ! )
> Trinux (=192.168.0.2) boots fast this way.
> Additional packages are loaded AND installed with:
> getpkg vi (without .tgz)
> or just loaded with:
> snarf http://192.168.0.254/vi.tgz
>
> Then I found there's no full use of RAM possible in trinux, so I
> started making changes in initrd. Not totally happy yet.
> Now I (am learning to) build my own packages. Installed slackware7.1.
> This is a good thing for understanding how linux works!
>
> Hope it helps a litlle,
> Arne
>
>> Greetz all,
>>
>> I have the Trinux NET boot floppy 0.80rc2. I've set up a package
>> server with all of the trinux .tgz packages for the local net at
>> ftp://10.0.0.2/trinux/pkg/ - the trinux boot floppy has the following
>> in /tux/config/server:
>>
>> ftp://10.0.0.2/trinux/pkg/
>> #http://www.trinux.org/pkg/
>> #http://www.io.com/~mdfranz/trinux/pkg/
>>
>> After boot, I see the messages
>> The network was successfully configured
>> Contacting ftp://10.0.0.2/trinux/pkg/...
>> Retrieving base packages from ftp://10.0.0.2/trinux/pkg/
>> Retrieving ftp://10.0.0.2/trinux/pkg/term.tgz
>>
>>
>> But the process takes forever.. around 5 minutes up to this point. I
> don't
>> have DNS configured to include the new trinux server yet, but I don't
>> see where that would have any effect on the package loading, etc.
>> This is a 100Mb network and 600 MHz systems with gobs of RAM. Oddly,
>> the only
> activity
>> I see on the switch connecting these systems is an intermittant blink
> every
>> 2-3 seconds; no constant activity like what i'd expect. Why the
>> slowness?
>>
>> Also, what is the command for retrieving additional packages after
>> Trinux fully boots?
>>
>> I've tried accessing the packages by typing the following commands:
>>
>> -getpkg
>> -getpkg ftp://10.0.0.2/trinux/pkg/vi.tgz
>> -snarf ftp://10.0.0.2/trinux/pkg/vi.tgz
>>
>> None of which retrieve the packages as i thought they would.
>>
>> Any guidance would be much appreciated.
>
>
>
> _______________________________________________
> Trinux-talk mailing list
> Tri...@li...
> https://lists.sourceforge.net/lists/listinfo/trinux-talk
|
