Matthew,
The new .iso appeared to boot fine on my HP Pavilion N5310. I hope this
information is of some use.
Thank you,
-earle.
----- Original Message -----
From: "Matthew Franz" <mf...@ci...>
To: <tri...@li...>; <tri...@li...>
Sent: Monday, September 02, 2002 11:01 PM
Subject: [Trinux-talk] Small (6MB) Test 2.4.19 ISO
> Howdy,
>
> I've released a small .iso for testing if anbody has the time/inclination.
>
> It is based on 2.4.19 and my latest initrd.gz. It has booted fine on my
> Thinkpad, VMware, and an old K6--but I'd like wider testing before doing
> even a snapshot release on sourceforge.
>
> It loops through and attempts to insmod a half-dozen or so of the most
> common NICs (it looks like I forgot a few old ISAs, though). This does
> *not* have support for any PCMCIA NiCs. Once this appears to be stable,
> I'll get to that.
>
> see:
>
> http://trinux.sf.net/release/
> http://www.io.com/~mdfranz/trinux/boot/
>
> It is 3sep02-2419.iso (with matching .md5) and it is about 6mb.
>
> Feedback/flames are welcome.
>
> I know there is still some funkiness--for example some of the packages are
> getting loaded twice (I think).
>
> - mdf
>
>
> -------------------------------------------------------
> This sf.net email is sponsored by: OSDN - Tired of that same old
> cell phone? Get a new here for FREE!
> https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
> _______________________________________________
> Trinux-talk mailing list
> Tri...@li...
> https://lists.sourceforge.net/lists/listinfo/trinux-talk
>
|
