trinux-talk

[Trinux-talk] Cannot Configure Nic NE2000

[Carlos A. A. <ca...@cd...>]

Dear Sirs:

I'm having some problems with NE2000 configurations.-

I deleted from Standard floppy the dhcp.tgz to be able to have place.-
I copied to /modules the 8390.o and ne.o files
I added in /tux/config/modules following lines:
8390.o
ne.o io=0x240

And in /tux/config/eth0 I changed dhcp for a fixed IP and NerMask

When I boot, nothing shows in "lsmod", although previously it showed:
unix.o
mii.o
af_packet.o

If I try to "insmod" ALL the mentioned modules it does it fine.-

What am I missing or doing wrong???

Awaiting your comments
Yours Sincerely

Carlos Alejandro Aguero

 

[Trinux-talk] Cannot Configure Nic NE2000

[Carlos A. A. <ca...@cd...>]

Hello:

My problem was solved and it had nothing to do with Trinux!!!

I had edited the /tux/config files with WordPad in Windows Environement and
that "scrued up" things.-
When I edited them within Trinux, it ALL works fine.-

CONCLUSION:
You MUST edit files with some Linux Editor.-

Thanks to all of you and Congratulations for Trinux!!
Best Regards
Carlos

Re: [Trinux-talk] Cannot Configure Nic NE2000

[Arne <akd...@ka...>]

Notepad from Win XP is also screwing things. Use some other freeware editor
instead. Older  windows' notepad worked fine.
Arne
----- Original Message -----
From: "Carlos Alejandro Aguero" <ca...@cd...>
To: <tri...@li...>
Sent: Wednesday, January 07, 2004 12:32 PM
Subject: [Trinux-talk] Cannot Configure Nic NE2000


> Hello:
>
> My problem was solved and it had nothing to do with Trinux!!!
>
> I had edited the /tux/config files with WordPad in Windows Environement
and
> that "scrued up" things.-
> When I edited them within Trinux, it ALL works fine.-
>
> CONCLUSION:
> You MUST edit files with some Linux Editor.-
>
> Thanks to all of you and Congratulations for Trinux!!
> Best Regards
> Carlos
>
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: IBM Linux Tutorials.
> Become an expert in LINUX or just sharpen your skills.  Sign up for IBM's
> Free Linux Tutorials.  Learn everything from the bash shell to sys admin.
> Click now! http://ads.osdn.com/?ad_id=1278&alloc_id=3371&op=click
> _______________________________________________
> Trinux-talk mailing list
> Tri...@li...
> https://lists.sourceforge.net/lists/listinfo/trinux-talk

Re: [Trinux-talk] Cannot Configure Nic NE2000

[<HHu...@t-...>]

Hallo, Carlos,

Du meintest am 05.01.04 zum Thema [Trinux-talk] Cannot Configure Nic NE2000:

> I added in /tux/config/modules following lines:
> 8390.o
> ne.o io=0x240

Which IRQ does the card use? Maybe you have to set it to "ISA" or  
"legacy" in the CMOS setup.

> If I try to "insmod" ALL the mentioned modules it does it fine.-

Can you see the card in
        /proc/interrupts
        /proc/ioports

What tells
        ifconfig eth0 192.168.0.21 up

        ifconfig

Viele Gruesse!
Helmut