Re: [Trinux-talk] NE2000 driver not loading

[Randy W. <ra...@si...>]

Success!!!!!!

I recompiled my own 2.4.5 kernel and now it works!!!!!! :-)

hmmmmmmmm


On Thursday 11 July 2002 23:30, Randy Walworth wrote:
> This is the output of my trinux boot sequence:
>
> Executing [prenet]
> Looking for eth0
> Bringing down eth0
> Found static network configuration.
> Configuring eth0
> SIOCSIFADDR: No such device
> SIOCSIFNETMASK: No such device
> SIOCGIFFLAGS: No such device
> SIOCADDRT: Network is unreachable
> eth0: error fetching interface information: Device not found
> ...
>
> I have set ether=3D3,0x240,eth0 to the append line in syslinux.cfg.
> IRQ3 and IO base address 240 is how my NE2000 capatible card is
> configured.
>
> I am using the trinux-0.80rc2-net.img.
> My ethernet card is IBM LAN 10baseT card with an AT/Lantic chip.
> I have also tried my trinux boot floppy with a Kingston KNE20T NIC and
> I get the same results.
>
> What am I missing?  I know both of these cards work with the Linux kern=
el
> ne2000 driver as I use them in other PC's running Linux.
>
> Thanks,
>
> Randy

--=20
Randy Walworth
IS Manager
Seattle Indian Health Board