Re: [Trinux-talk] trinux newbie

[<gu...@ke...>]

Thanks for the tip ! It did work..... now I can boot from my IDE disk ! B=
ut
I=B4m having problems to load my modules.
I discovered that the vars CDEV and FDEV are getting no value.... so when=
 my
box boots, it doesn=B4t recognize that it is
booting from a loadlin.exe.

Looking at the linuxrc boot script I=B4ve found where it set this vars:
--
CDEV=3D`dmesg | grep D-ROM | grep hd | cut -d: -f1 | sort | uniq`  # CD-R=
OM
devices
FDEV=3D`dmesg | grep -v LDM | grep "^ [sh]d[a-f][1-9]" | cut -d':' -f2 | =
sort
| uniq`  # FIXED

echo "FDEV: $FDEV"
echo "CDEV: $CDEV"
--
At the boot I see FDEV: and CDEV: empty.
"BOOT=3D" is empty to.

Can anyone help me ? Any experience like this before ?

I=B4m using a AMD Duron with freedos, kernel 2.4.17 and trinux-ide.


Thank=B4s in advance,
Gus




----- Original Message -----
From: "Matthew Franz" <mf...@ci...>
To: <gu...@ke...>
Cc: <tri...@li...>
Sent: Wednesday, February 20, 2002 6:07 AM
Subject: Re: [Trinux-talk] trinux newbie


>
> Yes, you can boot from a flash IDE or normal IDE drive. Here is a rough
> guide:
>
> 1) Create a small DOS/FAT partition (10-25mb). This will need to be *DO=
S*
> not NT, so you will need to dig up a Win9x or DoS boot floppy and forma=
t
> /s it. If you want to stay Open Source FreeDoS (http://www.freedos.org)
> will work fine.
>
> 2) Somehow copy loadlin.exe to that partition in C:\
>
> 3) Create a trinux directory on c:\
>
> 4) Download the latest initrd.gz from
> http://www.io.com/~mdfranz/trinux/initd/ and place it c:\
>
> 5) Download an ide kernel from http://trinux.sf.net/kernel/x.x.x/ide/ (=
I
> think 2.4.5 should work) to c:\bzimage
>
> 6) Test it to make surt it boots: c:> loadlin initrd=3Dinitrd.gz
> root=3D/dev/ram0 bzimage (the kernel name might come before the boot
> arguments, can't remember off the top of my head. Whatever command you =
get
> working can be added to your autoxec.bat to get everything going
>
> 7) Within c:\trinux create the following directories:
>
> tux - contains the normal directory structure found on trinux floppies
>
> bootpkg - will contain any packages you want loaded early on if you wan=
t
> to do network booting you will need: dnslibs.tgz dhcpcd.tgz system.tgz.
>
> kpkg - kernel packages you want loaded
>
> pkg - you can also put packages here
>
>
> NOTE: network configuration changes slightly from the last floppy relea=
se.
>
> If you want to do DHCP (easiest) tux\config\eth0 (or eth1) should conta=
in
> dhcp. You can also put the IP and netmask in there separated by a space
> (192.168.100.1 255.255.255.0) and then add \tux\config\gateway,dns with
> your default route and DNS server
>
> Post to the list if you have any problems.
>
> - mdf
>
> > I=B4ve just found trinux and looking around (docs, faq and lists) I d=
idn=B4t
> > find a *exact* answer for my question... so there it goes:
> > - Can I install trinux to boot from a IDE disk and not necessarily fr=
om
a
> > floppy disk (perhaps a flash-ide) ?
> > I=B4ve found documantation enough to install it in a floppy disk but =
I
> > couldn=B4t found any where explaning how to install only in IDE drive=
rs.
> > If someone could send me a url, doc, pice of txt, anything.... I=B4ll=
 be
> > thankful.
> >
> > Thank=B4s in advance,
> > Gus
> >
> >
> > _______________________________________________
> > Trinux-talk mailing list
> > Tri...@li...
> > https://lists.sourceforge.net/lists/listinfo/trinux-talk
> >
>
>
> _______________________________________________
> Trinux-talk mailing list
> Tri...@li...
> https://lists.sourceforge.net/lists/listinfo/trinux-talk
>