Re: [Trinux-talk] Harddrive Format

[Richard T. <ri...@th...>]

See below...

----- Original Message -----
From: <tb...@ti...>
To: "Richard Thomas" <ri...@th...>
Cc: "Trinux-Talk" <tri...@li...>
Sent: Wednesday, February 13, 2002 12:39 PM
Subject: Re: [Trinux-talk] Harddrive Format


>
> What type of filesystem are you trying to clone?
    In this instance, FAT32
>
> What, exactly is on the source partition?
    A Win98 OS
>
> What is the device id of the source partition?
    /dev/hdd1
>
> What is the device id of the destination partition?
    /dev/hdb1
>
>
> On Wed, 13 Feb 2002, Richard Thomas wrote:
>
> > The reason I was trying to mount the partition after creating it was to
make
> > sure I was creating it correctly.
> >
> > If I create a Linux (82?) type partition what -t type do I specify in
the
> > mount command line? What type partition do I create if I want to use the
> > ext2 driver to mount the partition?
> >
> > I am using dd to an intermediary file so that I get matching hashes from
the
> > initial partition and the destination image file. If I dd from drive to
> > drive, it will make an exact copy of the partition, but the hashes won't
> > match.
> >
> > I agree that I might be missing something. I just looked online and saw
that
> > I am missing the mkfs command step. I told you this was a newbie
question.
> >
> > ----- Original Message -----
> > From: <tb...@ti...>
> > To: "Richard Thomas" <ri...@th...>
> > Cc: "Trinux-Talk" <tri...@li...>
> > Sent: Wednesday, February 13, 2002 11:36 AM
> > Subject: Re: [Trinux-talk] Harddrive Format
> >
> >
> > >
> > > The dd command you quote is to read IN the partition to a file.  I
assume
> > > you are changing the command when you dd the file to a partition.  Do
you
> > > know the proper device name for the partition you have just created?
Was
> > > it used in the dd (out) command?
> > >
> > > You might try a "dd if=/dev/hdXX | od -c | head" and a
> > >
> > > "dd if=/directory/disk.img | od -c | head"  and compare them visually.
> > >
> > > This might tell you alot.
> > >
> > > Perhaps you are missing an important piece...
> > >
> > > A partition defines a region of disk.
> > > A filesystem fills a partition, and defines how the data is organized.
> > > A file is a container, placed within a filesystem, that can hold data.
> > >
> > > [.*]nux offers features not found in other OS's, including the ability
to
> > > bypass the filesystem and place a file on a partition and vise versa.
> > >
> > > You can dd a partition to a file. and then dd the file back to a new
> > > partition.  You will have mirrored the partition.  If you have both
disks
> > > connected but unmounted, then you can dd directly "dd if=/dev/hde1
> > > of=/dev/hde2".  The imtermediary file is not necessary.  You can then
> > > mount the second partition, just as you did the first.  If you
couldn't
> > > mount the source partition, then you won't be able to mount the clone.
> > >
> > > What is on the partition you are hoping to clone?  Is is a windows
> > > partition? FAT? NTFS? or Linux? minix, ext2, ext3?.  I think this may
be a
> > > mount issue...
> > >
> > > On Wed, 13 Feb 2002, Richard Thomas wrote:
> > >
> > > > Okay, here goes.
> > > >
> > > > Using cfdisk, I create a partition on the hard drive of type
'Linux'.
> > Then I
> > > > 'W'rite the partition table.
> > > >
> > > > I tried to mount the partition using the minix type. I get the
error,
> > "Too
> > > > many filesystems, wrong partition, yada yada..."
> > > >
> > > > I loaded ext2.o and tried to mount using the ext2 type. Didn't work.
> > > >
> > > > I loaded ntfs.o and change the partition type to 'HPFS/NTFS'. I
tried to
> > > > mount using the ntfs type. Didn't work.
> > > >
> > > > I guess I don't know what "-t type" to specify when mounting a Linux
> > type
> > > > partition.
> > > >
> > > > When I initially tried to dd partition to the image file on a FAT32
> > > > partition, I got an error about exceeding the 2GB file limit.
> > > >
> > > > The dd command line looks like this: dd if=/dev/hdd1
> > of=/directory/disk.img
> > > > bs=1M
> > > >
> > > > I am writing a hard drive partition to an image file and then
writing
> > the
> > > > image file to a 'clean' hard drive.
> > > >
> > > > Richard Thomas
> > > >
> > > > ----- Original Message -----
> > > > From: <tb...@ti...>
> > > > To: "Richard Thomas" <ri...@th...>
> > > > Cc: "Trinux-Talk" <tri...@li...>
> > > > Sent: Wednesday, February 13, 2002 9:00 AM
> > > > Subject: Re: [Trinux-talk] Harddrive Format
> > > >
> > > >
> > > > >
> > > > > It should work.  However, the devil is in the details.
> > > > >
> > > > > What modules did you load?
> > > > >
> > > > > What is the dd command line?
> > > > >
> > > > > What are you doing after the dd finishes, that causes you to
believe
> > that
> > > > > the dd failed?
> > > > >
> > > > > If you hope to use the disk as a filesystem, then the image you
are
> > > > > putting on the disk must be a fully formed filesystem.  You should
be
> > able
> > > > > to test the image with a mount -o loop command before you do the
dd.
> > The
> > > > > partition type should be set to match the type of filesystem.
> > > > >
> > > > > More info would help.
> > > > >
> > > > > On Wed, 13 Feb 2002, Richard Thomas wrote:
> > > > >
> > > > > > Good morning all...
> > > > > >
> > > > > > I have a newbie question, sorry.
> > > > > >
> > > > > > I am using cfdisk to create a partition
> > > > > > on a harddrive. I select the default
> > > > > > type as Linux and then write the
> > > > > > partition table. However, I am not able
> > > > > > to then mount the partition under
> > > > > > Trinux. I load what I think are the
> > > > > > appropriate modules. I have even tried
> > > > > > changing the type to NTFS with no luck.
> > > > > > What I am trying to do is create a
> > > > > > partition that I can write a 6.5GB image
> > > > > > file to using dd. I previously tried
> > > > > > this with VFAT, but ran into the 2GB
> > > > > > file size limit. Any suggestions?
> > > > > >
> > > > > > Thanks in advance.
> > > > > >
> > > > > > Richard Thomas
> > > > > >
> > > > > >
> > > > > > _______________________________________________
> > > > > > Trinux-talk mailing list
> > > > > > Tri...@li...
> > > > > > https://lists.sourceforge.net/lists/listinfo/trinux-talk
> > > > > >
> > > > >
> > > > > --
> > > > > --------------------
> > > > > Timothy Burt
> > > > > Internet Specialist
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > > _______________________________________________
> > > > Trinux-talk mailing list
> > > > Tri...@li...
> > > > https://lists.sourceforge.net/lists/listinfo/trinux-talk
> > > >
> > >
> > > --
> > > --------------------
> > > Timothy Burt
> > > Internet Specialist
> > >
> > >
> > >
> >
> >
> > _______________________________________________
> > Trinux-talk mailing list
> > Tri...@li...
> > https://lists.sourceforge.net/lists/listinfo/trinux-talk
> >
>
> --
> --------------------
> Timothy Burt
> Internet Specialist
>
>
>