Re: [Trinux-talk] Nic Trouble.

[Matthew F. <mf...@ci...>]

Which version (.7x or the .80 pre-release) are you using? For the .8x, it
looks like tulip support is enabled.

http://www.io.com/~mdfranz/trinux/boot-images/boot080pre1.flp

You might also try modifying the syslinux.cfg on the boot floppy so that
you specify the io port and irq (although typically you don't have to do
that for PCI nics)

-mdf

> I'm trying out trinux, and my nic isn't being recognized by the kernel.  Any
> advice?
> 
> When I do a 'dmesg | grep eth'  I get nothing.  When I look at /proc/pci  I see
> an entry like this:
> ============================
>  Bus  0, device  17, function  0:
>     Ethernet controller: Unknown vendor Unknown device (rev 17).
>       Vendor id=1317. Device id=985.
>       Medium devsel.  Fast back-to-back capable.  IRQ 10.  Master Capable.  Late
> 
> ncy=240.  Min Gnt=255.Max Lat=255.
>       I/O at 0xfc00 [0xfc01].
>       Non-prefetchable 32 bit memory at 0xffbefc00 [0xffbefc00].
> 
> ============================
> 
> Is there a way to specify what driver to use for this device?  The card is a
> 'Network Everywhere NC100.  When I boot RedHat 6.2 I use tulip.o for this card.
> 
> Is there any other info that would be helpful?
> 
> Thank you in advance for your help.
> 
> Patrick
> 
> 
> _______________________________________________
> Trinux-talk mailing list
> Tri...@li...
> http://lists.sourceforge.net/lists/listinfo/trinux-talk
>