Re: [Track-help] Insufficient test data to graph error message

[Travis B. <tra...@ya...>]

Michael,

I can reproduce this problem here.  Looks like a bug.  Something about your log files is different than what I usually test with, but I haven't had time to work it out yet.

Thanks for the report, I'll try and get to this tonight or tomorrow.


-Travis





----- Original Message ----
From: Michael Thomsen <Mic...@ha...>
To: "tra...@li..." <tra...@li...>
Sent: Wednesday, September 17, 2008 12:30:56 AM
Subject: [Track-help] Insufficient test data to graph error message


Hello,
 
I
have been trying to get the Grinder Analyzer up and running over the last day
or so, although I seem to be running into a problem that I cannot solve. 
Basically when I specify the data*.log and out*.log on the command line, then I
get the following error message:
 
FATAL:
insufficient test data to graph. conf/analyzer.properties specifies 25 buckets,
but data*.log contains less than 25 data points.
 
I
have included my out*.log and data*.log I would assume that they do have enough
data points, so perhaps there is something else that I need to do?
 
The
specs are as follows:
Windows
2003
Java
1.6
Grinder
3.1
GrinderAnalyzer
v2.b6
 
Any
help would be appreciated.
 
Regards,
 
  Michael Thomsen| Haley Limited
T +61 2 6206 7169 | F +61 2 6249 7715 | E mic...@ha... | www.haley.com 
 
This email communication and any attachments (referred to as "this message") may contain confidential, proprietary or privileged information. This message is intended for the nominated addressee(s) only Haley Limited (Haley) is not liable for any personal opinions expressed by the sender of this message. This message must not be distributed without the express written consent of Haley. Any unauthorized copying, disclosure or distribution of this message in whole or in part is strictly prohibited. If you are not the intended recipient of this message, please notify the sender and delete all copies of this message immediately. All email communications and all attachments which enter and leave the Haley network have been thoroughly scanned for viruses, however, Haley takes no responsibility for any virus which may be transmitted by way of this message.