From: Ying X. <yin...@wi...> - 2018-03-20 13:56:58
|
On 03/19/2018 08:10 PM, Jon Maloy wrote: > Selecting and expicitly configuring a TIPC node identity may be unwanted s/expicitly/explicitly > in some cases. > > In this commit we introduce a default setting if the identity has not > been set at the moment the first bearer is enabled. We do this by > using a raw copy of a unique identifier from the used interface: MAC > address in the case of an L2 bearer, IPv4/IPv6 address in the case > of a UDP bearer. > This is a good idea, which means TIPC has the capability of self-automatic configuration and automatically building a cluster without any manual interfering. Is my understanding right? In addition, after a node has established links with other nodes with the same net_id, user changes net_id through tipc_nl_net_set(). It means the node cannot communicates with its originally linked nodes. I just found one place in tipc_disc_rcv() where once net_id is different, discovery message is directly dropped. But after links have been established and then net_id is changed, I don't find where we handle the special case. In my mind, we should first break the current links and then launch another request to re-establish links with the new net_id. Moreover, we should immediately drop the message in data receive path once net_id is changed. However, it seems we don't identify whether net_id is same in tipc_rcv(). Please confirm this. Lastly, after zone concept is obsoleted, in the same Ethernet segment there often exists many nodes whose net_id is different. Therefore, once net_id is changed, we should permit the node to connect wither other nodes. Thanks, Ying > Signed-off-by: Jon Maloy <jon...@er...> > --- > net/tipc/bearer.c | 24 +++++++++++++++--------- > net/tipc/net.h | 1 + > net/tipc/udp_media.c | 13 +++++++++++++ > 3 files changed, 29 insertions(+), 9 deletions(-) > > diff --git a/net/tipc/bearer.c b/net/tipc/bearer.c > index ae5b44c..f7d47c8 100644 > --- a/net/tipc/bearer.c > +++ b/net/tipc/bearer.c > @@ -243,12 +243,6 @@ static int tipc_enable_bearer(struct net *net, const char *name, > int res = -EINVAL; > char *errstr = ""; > > - if (!tipc_own_id(net)) { > - errstr = "not supported in standalone mode"; > - res = -ENOPROTOOPT; > - goto rejected; > - } > - > if (!bearer_name_validate(name, &b_names)) { > errstr = "illegal name"; > goto rejected; > @@ -381,11 +375,13 @@ static void bearer_disable(struct net *net, struct tipc_bearer *b) > int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b, > struct nlattr *attr[]) > { > + char *dev_name = strchr((const char *)b->name, ':') + 1; > + int hwaddr_len = b->media->hwaddr_len; > + u8 node_id[NODE_ID_LEN] = {0,}; > struct net_device *dev; > - char *driver_name = strchr((const char *)b->name, ':') + 1; > > /* Find device with specified name */ > - dev = dev_get_by_name(net, driver_name); > + dev = dev_get_by_name(net, dev_name); > if (!dev) > return -ENODEV; > if (tipc_mtu_bad(dev, 0)) { > @@ -393,6 +389,16 @@ int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b, > return -EINVAL; > } > > + /* Autoconfigure own node identity if needed */ > + if (!tipc_own_id(net) && hwaddr_len <= NODE_ID_LEN) { > + memcpy(node_id, dev->dev_addr, hwaddr_len); > + tipc_net_init(net, node_id, 0); > + } > + if (!tipc_own_id(net)) { > + pr_warn("Failed to obtain node identity\n"); > + return -EINVAL; > + } > + > /* Associate TIPC bearer with L2 bearer */ > rcu_assign_pointer(b->media_ptr, dev); > b->pt.dev = dev; > @@ -400,7 +406,7 @@ int tipc_enable_l2_media(struct net *net, struct tipc_bearer *b, > b->pt.func = tipc_l2_rcv_msg; > dev_add_pack(&b->pt); > memset(&b->bcast_addr, 0, sizeof(b->bcast_addr)); > - memcpy(b->bcast_addr.value, dev->broadcast, b->media->hwaddr_len); > + memcpy(b->bcast_addr.value, dev->broadcast, hwaddr_len); > b->bcast_addr.media_id = b->media->type_id; > b->bcast_addr.broadcast = TIPC_BROADCAST_SUPPORT; > b->mtu = dev->mtu; > diff --git a/net/tipc/net.h b/net/tipc/net.h > index 08efa60..09ad02b 100644 > --- a/net/tipc/net.h > +++ b/net/tipc/net.h > @@ -41,6 +41,7 @@ > > extern const struct nla_policy tipc_nl_net_policy[]; > > +int tipc_net_init(struct net *net, u8 *node_id, u32 addr); > void tipc_net_finalize(struct net *net, u32 addr); > void tipc_net_stop(struct net *net); > int tipc_nl_net_dump(struct sk_buff *skb, struct netlink_callback *cb); > diff --git a/net/tipc/udp_media.c b/net/tipc/udp_media.c > index 3deabca..2c13b18 100644 > --- a/net/tipc/udp_media.c > +++ b/net/tipc/udp_media.c > @@ -47,6 +47,8 @@ > #include <net/addrconf.h> > #include <linux/tipc_netlink.h> > #include "core.h" > +#include "addr.h" > +#include "net.h" > #include "bearer.h" > #include "netlink.h" > #include "msg.h" > @@ -647,6 +649,7 @@ static int tipc_udp_enable(struct net *net, struct tipc_bearer *b, > struct udp_port_cfg udp_conf = {0}; > struct udp_tunnel_sock_cfg tuncfg = {NULL}; > struct nlattr *opts[TIPC_NLA_UDP_MAX + 1]; > + u8 node_id[NODE_ID_LEN] = {0,}; > > ub = kzalloc(sizeof(*ub), GFP_ATOMIC); > if (!ub) > @@ -677,6 +680,16 @@ static int tipc_udp_enable(struct net *net, struct tipc_bearer *b, > if (err) > goto err; > > + /* Autoconfigure own node identity if needed */ > + if (!tipc_own_id(net)) { > + memcpy(node_id, local.ipv6.in6_u.u6_addr8, 16); > + tipc_net_init(net, node_id, 0); > + } > + if (!tipc_own_id(net)) { > + pr_warn("Failed to set node id, please configure manually\n"); > + return -EINVAL; > + } > + > b->bcast_addr.media_id = TIPC_MEDIA_TYPE_UDP; > b->bcast_addr.broadcast = TIPC_BROADCAST_SUPPORT; > rcu_assign_pointer(b->media_ptr, ub); > |