Re: [Thinstation-general] thinstaton2.0 problem

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 454-5900

Oops,

should have read the query properly (must be too tired - well at least
that's my excuse this time).

Have also inadvertently not had a SESSION_0_ and received the 'invalid
session' message. That should be your next port of call.

If you are still having problems do a build with the package debug line
uncommented. It will at least stop and give you a chance to look at things.

Trevor B
----- Original Message ----- 
From: "Trevor Batley" <tr...@ba...>
To: "william huskey" <ic...@co...>;
<thi...@li...>
Sent: Wednesday, December 03, 2003 7:29 PM
Subject: Re: [Thinstation-general] thinstaton2.0 problem

> William,
>
> I had a small problem with the 2.0 beta that showed the same symptoms. I
> realised that the permissions on the generated initrd were incorrect (I
> guess it depends on who you are logged on as when you do the build). Once
I
> changed permissions to allow everyone to read & execute it all worked OK.
>
> Hope it helps.
>
> Trevor B
> ----- Original Message ----- 
> From: "william huskey" <ic...@co...>
> To: <thi...@li...>
> Sent: Tuesday, December 02, 2003 10:13 AM
> Subject: [Thinstation-general] thinstaton2.0 problem
>
>
> > Gentilmen (and woman ),
> > I have fixed my problem with PXE boot on version 1.0.2. I had a common
> case
> > of head stuck in my third point of contact.
> > all works fine with that version as far as I have tested (im still
> > negotating licences for Citrix so I have not tested that part).
> >
> > now to my real problem. I did a build of 2.0 beta 2. I get the system to
> > boot vmlinuz-2.4.24 and start the initrd . it looks like its booting but
> > everything is so fast there is no way for me to see any errors. then I
get
> > no such session terminating. now I switch back to the 1.0.2 initrd
> vmlinuz
> > and the correct thinstation config for that version and It now works.
> >
> > system information
> > VIA Mini-itx VIA EPIA-CL10000, PLE133 VIA Nehemiah 1GHZ CPU
> > 256 megs ram
> > PXE boot
> > trying to do a rdesktop
> > here is my build.config file
> >
> > # --- Kernel Version
> >
> > kernel 2.4.22
> >
> > # --- Boot Image Types
> >
> > image nbi               # Nbi is for boot with etherboot
> > image iso              # iso is for booting from a CD-ROM
> > image initrd           # initrd for pxe, loadlin and syslinux booting
> >
> > # --- Modules to include in boot image
> >
> > module agpgart # AGP bus module for use with AGP video cards
> >
> > # --- Network cards modules
> >
> > #module 8139too
> > module via-rhine
> > #module eepro100
> > #module e1000
> > #module 3c59x
> > #module 3c509
> > #module dmfe
> > #module pcnet32
> > #module sis900
> > #module 8390
> > #module ne io=0x300
> > #module ne2k-pci
> > #module depca
> > #module eepro
> > #module lance
> > #module natsemi
> > #module ni5010
> > #module ni52
> > #module ni65
> > #module smc-ultra
> > #module smc9194
> > #module tlan
> > #module tulip
> > #module wd
> > #module winbond-840
> >
> > # -- Sound Modules
> > #module sb io=0x220 irq=5 dma=1 dma16=5
> > #module sb isapnp=1
> > #module es1371
> > #module es1370
> > module via82cxxx_audio
> > #module i810_audio
> > #module emu10k1
> >
> > # -- USB Devices
> > module usb-hid          # Needed for USB keyboards and mice
> > module usb-storage      # Needed for USB-Sticks
> > module usb-printer      # Needed for USB-Printers
> >
> > # -- Storage Devices
> >
> > module floppy           # Floppy Disk Drive Support
> > module cdrom            # CD-Rom Drive Support
> >
> > # -- Filesystem Support
> > # -- Every mounted device needs a filesystem, choose which ones are
> > supported below.
> >
> > module isofs            # ISO9960 file system support for CDRoms
> > module vfat             # Fat and VFat file system support
> > module ext2             # Ext2 file system support
> > module ext3             # Ext3 file system support
> > module supermount       # Supermount support for auto unmounting of
> > removable media
> > package nfs             # NFS file system support
> > package smbfs           # Samba client FS Support, allows you to mount
smb
> > filesystems
> >
> > # --- Packages to include in boot image
> > # --- Packages below may be "package" or "nsp"
> >
> > package hwclock # Utility to set system time from hardware clock
> > package sound-esd # Adds Sound Daemon Server
> > package sound-nasd # Adds Sound Daemon Server
> >
> > # --- X related packages
> >
> > package xf-75dpi-fonts # Include X local fonts (75dpi)
> > package xf-tinyx # TinyX Xvesa server (for low memory machines)
> > # works with ICA, is slower, don't choose any XF4 stuff with
> > # this server, you don't need it.
> > #package xf3-svga # XF86_SVGA 3.3.6 server
> > #package xf3-s3 # XF86_S3 3.3.6 server
> > #package xf3-vmware # VMWare X server for development
> > #package xf4vnc          # XF4 VNC Server Module, Port 5800 for Java
> client
> > #package xf4
> >
> > package xf4-apm             # XFree86 4.2 drivers
> > #package xf4-ark
> > package xf4-ati
> > #package xf4-chips
> > package xf4-cirrus
> > package xf4-cyrix
> > #package xf4-glint
> > #package xf4-i128
> > package xf4-i740
> > package xf4-i810 # Needed for Intel 810 cards
> > #package xf4-mga
> > #package xf4-neomagic
> > #package xf4-nv
> > package xf4-r128
> > #package xf4-radeon
> > #package xf4-rendition
> > package xf4-s3 # Needed S3 Cards
> > package xf4-s3virge
> > package xf4-savage
> > #package xf4-siliconmotion
> > package xf4-sis
> > #package xf4-tdfx
> > package xf4-tga
> > package xf4-trident
> > #package xf4-tseng
> > package xf4-vesa # Generic VESA driver, use this if you don't know what
to
> > use
> > #package xf4-vga # VGA 320x200 8 bit
> > #package xf4-vmware
> >
> >
> >
> > # --- Keyboard layouts
> >
> > #package keymaps-ar
> > #package keymaps-br
> > #package keymaps-cz
> > #package keymaps-de
> > #package keymaps-dk
> > #package keymaps-es
> > #package keymaps-fr
> > #package keymaps-hr
> > #package keymaps-it
> > #package keymaps-lt
> > #package keymaps-lv
> > #package keymaps-mk
> > #package keymaps-no
> > #package keymaps-nz
> > #package keymaps-pl
> > #package keymaps-pt
> > #package keymaps-ro
> > #package keymaps-ru
> > #package keymaps-sl
> > #package keymaps-th
> > #package keymaps-tr
> > #package keymaps-uk
> > package keymaps-us
> >
> > # --- Core Package types
> >
> > package rdesktop # X RDP client for Windows Terminal Services (rdesktop)
> > package vncviewer # X VNC client (vncviewer)
> > package ica # Citrix ICA client support
> > package tarantella # Tarantella client support
> > package ica-wfc         # Citrix ICA manager
> > package xnest # XDM in a window client
> > package blackbox # Blackbox window manager
> > package rxvt # Xterm
> > package ssh # SSH client
> > package dillo # Dillo web browser
> >
> > # --- Other services
> >
> > package www # Web access to client
> > package lp_server # Remote printing daemon (LaserJet compatible)
> > package lpr             # LPR Print Server, for use with samba-server
> > package
> > package tftpd # TFTP, built in tftpd server
> > # Useful for making a tftpserver for thinstation on a WAN
> > # over a slow link
> > #package samba-server # Samba server FS Support, allows you to share
> >                         # local floppy/cdrom/hd/printer to other Windows
> > # PCs; Needs supermount for removeable media
> > package debug # Debug support, adds strace and other commands, not
needed
> >
> >
> > # --- Define Miscellaneous Paramaters
> >
> > param rootpasswd     1ccaros12
> > param xf4vncpasswd   saic
> > param storagepasswd  saic
> > param bootlogo       true
> > param bootresolution 1024x768
> > param defaultconfig  thinstation.defaults
> > param icaurl
> >
>
http://download2.citrix.com/files/en/products/client/ica/current/linuxx86.ta
> > r.gz
> > param tarantellaurl
> >
>
http://www.tarantella.com/download/clients/download.php/http/Tarantella.E3/3
> > .40.911/native/tnci3li.tar
> > param httpproxy      http://172.23.100.2:8080
> >
> > # --- Experimental Packages
> >
> >
> > my thinstation.conf
> > # --- Thinstation sample configuration file
> >
> > # --- Session Options
> > #
> > # Note:                    X is a number equal to or greater than 0
> > #
> > # SESSION_TYPE             Package type, choose beetwen:
> > #                          - vncviewer        Start vncviewer in X
> > #                          - rdesktop         Start rdesktop in X
> > #                          - x                Start x-terminal session
> (xdm)
> > #                          - ssh              Start ssh client in linux
> > console
> > #                          - telnet           Start telnet client in
linux
> > console
> > #                          - ica              Start Citrix ICA client in
X
> > #                          - blackbox         Start blackbox window
> manager
> > session
> > #                          - dillo            Start Web Browser in X
> > #                          - tftpd            Start tftp daemon
> > #                          - tarantella       Start tarantella client
> > # SESSION_SCREEN           Display to run the XFree server on
> > # SESSION_AUTOSTART        On/Off Application will be placed in a menu
on
> > startup, but
> > #                          not automatically executed
> > # SESSION_WORKSPACE        Workspace to run program on in a window
manager
> > # SESSION_PACKAGE_SERVER   IP address/hostname of the server
> > # SESSION_PACKAGE_OPTIONS  Command line options for the session type
> > #
> > #
> > # --- Ica Specific Options
> > #
> > #                       GLOBAL Settings
> > #ICA_USE_SERVER_KEYBOARD    Use default server keyboard, otherwise use
> > KEYBOARD_MAP
> > #                           variable
> > #ICA_BROWSER_PROTOCOL       Broswer protocol, can be HTTPonTCP or UDP
> > #
> > #                           APPLICATION SET settings
> > #ICA_ENCRYPTION             Encryption level for ICA
> > #ICA_COMPRESS               Compression, On/Off
> > #ICA_AUDIO                  Audio, On/Off
> > #ICA_AUDIO_QUALITY          Audio Quality, Low, Medium, High
> > #ICA_APPLICATION_SET        Published Application (Not needed if using
> > #                           ICA_SERVER)
> > #ICA_SERVER                 Server to Connect to (Not needed if using
> > #                           ICA_APPLICATION_SET)
> >
> > # Default Settings for all sessions
> >
> > SCREEN=0
> > WORKSPACE=1
> > AUTOSTART=On
> > ICA_USE_SERVER_KEYBOARD=On
> > ICA_BROWSER_PROTOCOL=HTTPonTCP
> > ICA_SERVER=
> > ICA_ENCRYPTION=Basic
> > ICA_COMPRESS=On
> > ICA_AUDIO_QUALITY=Low
> > ICA_AUDIO=On
> > ICA_SEAMLESS_WINDOW=Off
> >
> > # Individual Session Settings, override defaults
> >
> > #SESSION_0_TYPE=ica
> > #SESSION_0_ICA_APPLICATION_SET="Windows 2000 Desktop"
> >
> > #SESSION_1_TYPE=ica
> > #SESSION_1_ICA_APPLICATION_SET="Microsoft Word"
> >
> > #SESSION_2_TYPE=ica
> > #SESSION_2_ICA_SERVER=ICA
> >
> > SESSION_3_TYPE=rdesktop
> > SESSION_3_SCREEN=1
> > SESSION_3_RDESKTOP_SERVER=192.168.1.1
> > SESSION_3_RDESKTOP_OPTIONS="-u steve -p ''"
> > SESSION_3_AUTOSTART=Off
> >
> > #SESSION_4_TYPE=rdesktop
> > #SESSION_4_SCREEN=1
> > #SESSION_4_RDESKTOP_SERVER=192.168.1.1
> > #SESSION_4_RDESKTOP_OPTIONS="-u ''"
> > #SESSION_4_AUTOSTART=Off
> >
> > #SESSION_5_TYPE=rxvt
> > #SESSION_5_SCREEN=1
> > #SESSION_5_RXVT_OPTIONS="-bg black -cr green -fg white -C -sl 500"
> > #SESSION_5_WORKSPACE=2
> >
> > #SESSION_6_TYPE=blackbox
> > #SESSION_6_SCREEN=1
> >
> > #SESSION_7_TYPE=x
> > #SESSION_7_SCREEN=2
> > #SESSION_7_X_SERVER=192.168.1.2
> > #SESSION_7_X_OPTIONS="-indirect"
> > #SESSION_7_AUTOSTART=Off
> >
> >
> > # --- General Options
> > #
> > # KEYBOARD_MAP       Keyboard layout
> > # SYSLOG_SERVER      Log server ip address or hostname.
> > #                    If the work "local" is used, then syslog starts
> logging
> > locally
> > #                    If not specified syslogd is not loaded.
> > # USB_ENABLED        Enable USB Drivers into memory if USB package is
> > choosen
> > # DAILY_REBOOT       Will reboot server if up over a day and one of the
> > session
> > #                    types is closed
> > # AUTOPLAYCD         If enabled this will autoplay music cds when
> inserted.
> > # CUSTOM_CONFIG      Allows choosing custom boot config, On/Off
> >
> > KEYBOARD_MAP=nz
> > SYSLOG_SERVER=local
> > USB_ENABLED=On
> > DAILY_REBOOT=On
> > AUTOPLAYCD=On
> > CUSTOM_CONFIG=Off
> >
> >
> > # --- Networking Options
> > #
> > # NET_HOSTNAME           Hostname to use if not using a
thinstation.hosts
> > file, note
> > #                        that the machine MAC address will replace any *
> if
> > used.
> > # NET_REMOTE_ACCESS_FROM List of hostnames/ip address accepted by the
> server
> > #                        for remote control, used by telnetd and www
> > packages
> > # NET_SMTP_SERVER        Email server address for error logs
> > # NET_SMTP_EMAIL         Email address of administrator
> > # NET_BASE_NAME          File to serve as a tftp server, for use with
> tftpd
> > package.
> > # NET_TELNETD            Enables built-in telnetd server package
> >
> > #NET_HOSTNAME=donald
> > NET_HOSTNAME=ts_*
> > NET_SMTP_SERVER=coastapps
> > NET_SMTP_EMAIL=mr...@we...
> > NET_TIME_SERVER=coast1
> > NET_BASE_NAME=thinstation
> > NET_TELNETD_ENABLED=On
> > NET_REMOTE_ACCESS_FROM="gm-018 gm-180 gm-003 gm-179 gm-189 coastcx1
> coastcx2
> > coastcx3"
> >
> > # --- NSP Options
> > #
> > # NSP_PACKAGES           Choice of packages to download for NSP
> > # NSP_PREFIX         Download NSPs from a subdir of /tftpboot if
> NSP_PREFIX
> > #                    is set in thinstation.conf
> > # MOD_PREFIX         Downloads and insmod's a module from a subdir of
> > /tftpboot
> > #                    if MOD_PREFIX is set in thinstation.conf
> >
> > #NSP_PACKAGES="blackbox rxvt"
> > #NSP_PREFIX=nsp
> > #MOD_PREFIX=modules
> >
> >
> > # --- XServer Options
> > #
> > # SCREEN_RESOLUTION       Screen resolutions available in the
workstations
> > # SCREEN_COLOR_DEPTH      Number of bits per pixel (8,16,24)
> > # SCREEN_HORIZSYNC        Monitor horizontal sync frequency in Khz.
> > # SCREEN_VERTREFRESH      Monitor vertical refresh frecuency in Hz.
> > # MOUSE_PROTOCOL          Mouse protocol type (Microsoft, PS/2, etc.)
> > #                         (mouse is autodetected, use this only if it
> fails)
> > # MOUSE_DEVICE            Mouse device:  /dev/ttyS0 -> COM1
> > #                                   /dev/ttyS1 -> COM2
> > #                                   /dev/ttyS2 -> COM3
> > #                                   /dev/ttyS3 -> COM4
> > #                                   /dev/psaux -> PS/2 mouse port
> > #                                   /dev/input/mice -> USB mouse (needs
> USB
> > package)
> > # MOUSE_RESOLUTION        Mouse resolution
> > # SCREEN_X_FONT_SERVER    IP address or hostname of the font server for
X
> >
> > SCREEN_RESOLUTION="800x600 | 1024x768 | 640x480 | *"
> > SCREEN_COLOR_DEPTH="16 | 8 | 24 | *"
> > SCREEN_HORIZSYNC="30-64 | *"
> > SCREEN_VERTREFRESH="56-87 | 60 | 56 | 70 | 72 | 75"
> > #SCREEN_X_FONT_SERVER=192.168.1.2:7100
> > #MOUSE_PROTOCOL=PS/2
> > #MOUSE_DEVICE=/dev/psaux
> > MOUSE_RESOLUTION=100
> >
> >
> > # --- Printing Options
> > #
> > # PRINTER_0_NAME     Workstation Printer Name, Can be Any Valid Name
> > # PRINTER_0_DEVICE   Workstation printer device (if not specified
devices
> > #                    are not loaded).
> > #                       /dev/printers/[0-2]   for parallel ports
> > #                       /dev/ttyS[0-3] for serial ports
> > #                       /dev/usb/lp[0-2] for USB printers
> > #
> > # PRINTER_0_TYPE     N for network, P for parallel, S for serial, U for
> USB
> > printer
> > # PRINTER_0_OPTIONS  Serial port options.
> > # PRINTER_1_*        See PRINTER_0_*
> > # PRINTER_2_*        See PRINTER_0_*
> > # PRINTER_3_*        See PRINTER_0_*
> >
> > PRINTER_0_NAME=parallel
> > PRINTER_0_DEVICE=/dev/printers/0
> > PRINTER_0_TYPE=P
> >
> > #PRINTER_1_NAME=serial
> > #PRINTER_1_DEVICE=/dev/ttyS1
> > #PRINTER_1_TYPE=S
> > #PRINTER_1_OPTIONS=
> >
> > #PRINTER_2_NAME=usb
> > #PRINTER_2_DEVICE=/dev/usb/lp0
> > #PRINTER_2_TYPE=U
> >
> > #PRINTER_3_NAME=usb
> > #PRINTER_3_DEVICE=/dev/usb/lp0
> > #PRINTER_3_TYPE=U
> >
> > # --- Permanent Storage Options
> > #
> > # STORAGE_PATH           Path to where storage device is mounted to save
> > #                        profile settings.  This should be one of
> > #                        /mnt/usbstick
> > #                        /mnt/floppy
> > #                        /mnt/discX/partX
> > #                        /mnt/nfs
> > #                        /mnt/smb
> > # STORAGE_SERVER         This is the path to the SMB or NFS server, ie
> > #                        server:/path/to/profile
> > # STORAGE_USER           This is the username for SMB mounts, password
is
> > #                        defined at build time in build.conf
> > # STORAGE_PREFIX         This is prefex for the folder name to store
> > settings
> > #                        in on the storage device.   You can also use
one
> of
> > the
> > #                        special characters below.
> > #
> > #                        M = Mac Address
> > #                        H = Hostname
> > #                        I = Ip Address
> > #
> > #                        Note default prefix for storing the profile is
> > #                        .profile
> > # STORAGE_WRITE          Enable cron job to save profile every 5 minutes
> >
> > #STORAGE_PATH=/mnt/nfs
> > #STORAGE_SERVER=gm-018:/opt/thinstation
> > #STORAGE_USER=duck
> > #STORAGE_PREFIX=H
> > #STORAGE_ENABLE_WRITE=On
> >
> >
> > # --- Samba Options
> > #
> > # SAMBA_SERVER_ENABLED    Enable Samba Server Daemons, On/Off
> > # SAMBA_WORKGROUP         Workgroup for server
> > # SAMBA_SECURITY          Type of security, USER, DOMAIN, SERVER
> > # SAMBA_SERVER            Server for security
> > # SAMBA_HARDDISK          Enable Harddrive support, On/Off
> > # SAMBA_CDROM             Enable CDRom Support, On/Off
> > # SAMBA_FLOPPY            Enable Floppy Support, On/Off
> > # SAMBA_PRINTER           Enable Printer Support, On/Off
> >
> > SAMBA_SERVER_ENABLED=Off
> > SAMBA_WORKGROUP=Westcoastdhb
> > SAMBA_SECURITY=Server
> > SAMBA_SERVER=coast3
> > SAMBA_HARDDISK=Off
> > SAMBA_CDROM=On
> > SAMBA_FLOPPY=On
> > SAMBA_PRINTER=On
> >
> > please let me knwo if I missed something ..
> >
> >
> >
> > -------------------------------------------------------
> > This SF.net email is sponsored by: SF.net Giveback Program.
> > Does SourceForge.net help you be more productive?  Does it
> > help you create better code?  SHARE THE LOVE, and help us help
> > YOU!  Click Here: http://sourceforge.net/donate/
> > _______________________________________________
> > Thinstation-general mailing list
> > Thi...@li...
> > https://lists.sourceforge.net/lists/listinfo/thinstation-general
> >
>
>
>
> -------------------------------------------------------
> This SF.net email is sponsored by: SF.net Giveback Program.
> Does SourceForge.net help you be more productive?  Does it
> help you create better code?  SHARE THE LOVE, and help us help
> YOU!  Click Here: http://sourceforge.net/donate/
> _______________________________________________
> Thinstation-general mailing list
> Thi...@li...
> https://lists.sourceforge.net/lists/listinfo/thinstation-general
>