SV: [Thinstation-developer] Pause while starting Citrix session - the solution?
Brought to you by:
doncuppjr
From: Klaus B. J. <kb...@aa...> - 2005-05-30 10:17:06
|
Klaus Bech Jensen <> wrote: > Hmmm, with the test rig (a Compaq Deskpro 350 MHz Pentium II) > AUTOPLAYCD is what makes the difference between pause and no > pause. Even with version 9 of the ICA client. >=20 > But since then I have started deploying a hard drive image > based on the one I made without the pause. And it turns out > that with never Deskpro's with a 500 MHz Pentium III, the > pause is back. Taking the hard drive from a 500 MHz and > putting it in one of the 350's, the pause is gone again. I > have been unable to find any difference in the CMOS Setup. > The only differences I have been able to find are: > The 350's have CDROM drives, where the other don't, and the > difference in processor types and speeds. >=20 > Go figure. On a whim, I tried unplugging the CDROM drive of one of the working = clients. Then it, too, got the pause. Plugged the drive back in and it's = working just fine. Also, plugging a CDROM drive into one of the others = got rid of the pause there, too. Further testing shows, that removing package cdrom from build.conf does not remove the pause (I thought it might be due to = ICA trying to mount something non-existent). Next step was to change the wfclient.ini.tpl to not try to share "drive = D". Still no help. After that I tried removing package supermount from build.conf, and that did the trick! The problem is, I need supermount for floppy access on those clients. Any ideas? med venlig hilsen Klaus Bech Jensen, IT-koordinator (INTP) Aaskov Kommune Tlf. 99992300 - Dir. 99992380 |