Re: [Svxlink-devel] Strange problem in SVXLINK ->diff
Brought to you by:
sm0svx
From: Tobias B. <sm...@us...> - 2009-04-24 17:10:40
|
On Thursday 23 April 2009 08:22:53 Adi Bier wrote: > Hi Foeke, > > find enclosed a diff based on the latest trunk. Please recompile && > reinstall it. A simple check against con->isConnected() should be enough. Changed it to this and checked it in. Seems to work here at least. 73's de SM0SVX / Tobias > > Checkout if the error still appears by setting an absurd APRS-Server > (like xxx.xxx.net:14580), restart SvxLink and try to establish a > connection to #9999 or an other station that is reachable. > > Svxlink should stay alive now ;-) > > 73's de Adi, DL1HRC > > Foeke Holtrop schrieb: > > Hello Tobias, > > > > I had something strange on our two sxvlink systems. Today I updated them > > to SVN revision 1578 and everything looked OK. > > But after a while the svxlink software on both systems crashed. One > > system is running Fedoracore and the other runs Ubuntu. > > > > I investigated this error and discovered the following. > > > > When a echolink connection was started or was incoming on the system, the > > svxlink application crashed and the next error appeared: > > > > svxlink: AsyncTcpConnection.cpp:216: int > > Async::TcpConnection::write(const void*, int): Assertion `sock != -1' > > failed. > > Afgebroken (this means terminated) > > > > On the two svxlink systems I downgraded the svxlink source and at SVN > > 1570 everything was working again. > > > > On both systems LOCATION_INFO is used. > > > > On my test system I installed SVN 1578 and started trouble shooting the > > system. > > > > When I "disable" the Location_info in the ModuleEcholink.conf > > > > #LOCATION_INFO=LocationInfo > > > > [LocationInfo] > > APRS_SERVER_LIST=euro.aprs2.net:14580 > > STATUS_SERVER_LIST=aprs.echolink.org:5199 > > LON_POSITION=12.10.00E > > LAT_POSITION=51.10.00N > > FREQUENCY=438.875 > > TX_POWER=8 > > ANTENNA_GAIN=6 > > ANTENNA_HEIGHT=20m > > ANTENNA_DIR=-1 > > PATH=WIDE1-1 > > BEACON_INTERVAL=10 > > TONE=136 > > COMMENT=SvxLink by SM0SVX (svxlink.sourceforge.net) > > > > Everything is working fine and I can connect echolink stations without > > any errors. Looks like somethings goes wrong in this section in relation > > with an echolink connect. Strange thing is that I have set up the > > LOCATION_INFO about a week ago and never have had this error message > > until today. Downgrading to 1577, 1576, etc did not bring the solution > > until I reached SVN 1570. > > > > I hope I could give you enough information to solve this problem. > > > > 73' Foeke PA3FNT > > > > > > > > > > > > ------------------------------------------------------------------------- > >----- Stay on top of everything new and different, both inside and > > around Java (TM) technology - register by April 22, and save > > $200 on the JavaOne (SM) conference, June 2-5, 2009, San Francisco. > > 300 plus technical and hands-on sessions. Register today. > > Use priority code J9JMT32. http://p.sf.net/sfu/p > > _______________________________________________ > > Svxlink-devel mailing list > > Svx...@li... > > https://lists.sourceforge.net/lists/listinfo/svxlink-devel |