Re: [sumo-user] R: arrivalPos option

[Jakob E. <nam...@go...>]

Hello Pietro,
I'm having a hard time reproducing this behaviour. Could you please send an
example network and route (preferebly small).
regards,
Jakob

2011/11/9 Pietro Niccoli <pi...@ti...>

> Hello,
>
> I updated to version 0.13 and I rewrote the parameter, and now it works.
>
> But I found a little bug (supposedly). I run a simulation with a map of
> mine, and if a vehicle has a short road as a destination (arrivalPos is set
> to -0.1), when it exits sumo reports a wrong teleport and collision:
>
>
>
> Warning: Teleporting vehicle '1188'; collision, lane='-543232277_0',
> time=291.00.
>
>
>
> In this case, the road -543232277 is 6 meters long, the car was travelling
> at 7,88 m/s and at step 291 it was positioned at 1,08 m. in the destination
> road. In the following step, the car arrives and disappears, but sumo
> prints
> the above error message. There were absolutely no other cars around.
>
> My understanding is that since the car was travelling faster than the
> remaining length, this is recognized as a wrong collision. Does it make any
> sense?
>
> Thanks for your help!
>
>
>
> Pietro
>
>
>
> Da: Jakob Erdmann [mailto:nam...@go...]
> Inviato: martedì 8 novembre 2011 12:12
> A: Pietro Niccoli
> Cc:; eg...@gm...
> Oggetto: Re: [sumo-user] arrivalPos option
>
>
>
> As Daniel said, the option should work. If it does not work for you (using
> the latest version of SUMO) please send a small example.
> regards,
> Jakob
>
> 2011/11/4 Pietro Niccoli <pi...@ti...>
>
> Hi everyone,
> I tried using that parameter, but the cars still exit at the beginning of
> the destination road.
> Here
> (
> http://sumo.sourceforge.net/doc/current/docs/Definition_of_Vehicles,_Vehicl
> <
> http://sumo.sourceforge.net/doc/current/docs/Definition_of_Vehicles,_Vehicl
> %0Ae_Types,_and_Routes.html<http://sumo.sourceforge.net/doc/current/docs/Definition_of_Vehicles,_Vehicl%0A%0Ae_Types,_and_Routes.html>
> >
> e_Types,_and_Routes.html) it's said that this parameter is currently not
> evaluated, anyone can confirm this?
> Thanks all,
>
> Pietro
>
> -----Messaggio originale-----
> Da: Daniel Krajzewicz [mailto:d.k...@go...]
> Inviato: lunedì 31 ottobre 2011 13:50
> A: Eric Gamess
> Cc: sum...@li...
> Oggetto: Re: [sumo-user] Route with only one edge
>
> Dear Eric,
>
> just write <vehicle arrivalPos="-1" ...><route
> edges="myedge"/></vehicle>...
> You have to set the arrivalPos attribute to the position at the end of your
> last edge in order to pass it, too. Negative numbers, as "-1" are counted
> from the end of the edge.
>
> sincerely,
> Daniel
>
> 2011/10/31 Eric Gamess <eg...@gm...>
>
> > Hello all,
> >
> > ....
> >
> > Also, in SUMO, vehicles disappear at the beginning
> > of the last edge of a route. Is there a way to make
> > them disappear at the end of the last edge???
> >
> > Thank you for you help.
> >
> > Eric.
>
>
>
>
> ------------------------------------------------------------------------------
> RSA(R) Conference 2012
> Save $700 by Nov 18
> Register now
> http://p.sf.net/sfu/rsa-sfdev2dev1
> _______________________________________________
> sumo-user mailing list
> sum...@li...
> https://lists.sourceforge.net/lists/listinfo/sumo-user
>