From: Reza Z. <rza...@en...> - 2004-02-20 20:48:58
|
Hi, Thanks, i installed mesa3d and the DRI error is gone but the monitor is still having problems(still no monitor), EngineError(1220): WriteBuffCollectorFD(fd=7,ps=1024): Error in write with full packet EngineWarning[10](1220): Error writing to monitor 1 EngineWarning[10](1220): Error sending data to monitor 1 Monitor 1 is being disconnected EngineWarning[10](1220): WriteBuffCollectorFD(fd=7,ps=1024): closing with 353 by tes left EngineWarning[10](1220): WriteBuffFD(fd=7): closing even though I have 1 message s to send here is the complete output (BTW, i had this error in my last e-mail's output too) rcssmonitor3D version 0.2 Copyright (C) 2003, Heni Ben Amor and Markus Rollmann, Universit?t Koblenz. Copyright (C) 2004, The RoboCup Soccer Server Maintenance Group. Type '--help' for further information (CommUnit) connecting to localhost:12001 New monitor connect 1 Engine Status: PAUSED simtime=0 events=0 mean simtime/sec=0 SpadesServer::StartAgents(foo, 2) SpadesServer::StartAgents(bar, 2) (SpadesServer) agentConnect 2 (GameControlServer) A new agent connected (id: 2) Unpausing simulation... (AgentAspect) created CreateEffector 'CreateEffector' (SpadesServer) agentConnect 1 (GameControlServer) A new agent connected (id: 1) (AgentAspect) created CreateEffector 'CreateEffector' (SpadesServer) agentConnect 0 (GameControlServer) A new agent connected (id: 0) (AgentAspect) created CreateEffector 'CreateEffector' (SpadesServer) agentConnect 3 (GameControlServer) A new agent connected (id: 3) (AgentAspect) created CreateEffector 'CreateEffector' (GameStateAspect) handed out uniform number 1 for team foo (GameStateAspect) handed out uniform number 2 for team foo (GameStateAspect) handed out uniform number 1 for team bar Engine Status: simtime=91 events=79 mean simtime/sec=14.5839 Engine Status: simtime=311 events=266 mean simtime/sec=42.2717 Engine Status: simtime=511 events=436 mean simtime/sec=37.5406 Engine Status: simtime=731 events=623 mean simtime/sec=42.8791 Engine Status: simtime=951 events=810 mean simtime/sec=43.3509 Engine Status: simtime=1171 events=997 mean simtime/sec=40.6363 EngineError(1220): WriteBuffCollectorFD(fd=7,ps=1024): Error in write with full packet EngineWarning[10](1220): Error writing to monitor 1 EngineWarning[10](1220): Error sending data to monitor 1 Monitor 1 is being disconnected EngineWarning[10](1220): WriteBuffCollectorFD(fd=7,ps=1024): closing with 353 by tes left EngineWarning[10](1220): WriteBuffFD(fd=7): closing even though I have 1 message s to send Engine Status: simtime=1371 events=1167 mean simtime/sec=38.5871 Engine Status: simtime=1611 events=1371 mean simtime/sec=47.0287 Engine Status: simtime=1811 events=1541 mean simtime/sec=36.5909 Engine Status: simtime=2031 events=1728 mean simtime/sec=41.6119 Engine Status: simtime=2271 events=1932 mean simtime/sec=43.9398 Engine Status: simtime=2451 events=2085 mean simtime/sec=34.5854 Engine Status: simtime=2691 events=2289 mean simtime/sec=44.779 Engine Status: simtime=2951 events=2510 mean simtime/sec=48.3309 Engine Status: simtime=3211 events=2731 mean simtime/sec=48.5666 Regards Reza ----- Original Message ----- From: "Markus Rollmann" <rol...@un...> To: "Reza Zafarani" <rza...@en...> Cc: <sse...@li...> Sent: Friday, February 20, 2004 11:15 AM Subject: Re: [Sserver-three-d] No Monitor > Hi, > > On Fri, 20 Feb 2004, Reza Zafarani wrote: > > here is the output when i run the rcssserver ;) , how should i fix it out?. > > [...] > > Xlib: extension "XFree86-DRI" missing on display ":0.0". > > > > ScriptServer: Running /root/.rcssserver3d/zeitgeist.rb... ok > > > > ScriptServer: Running /root/.rcssserver3d/oxygen.rb... ok > > > > ScriptServer: Running /root/.rcssserver3d/rcssmonitor3d.rb... ok > > > > rcssmonitor3D version 0.2 > [...] > > the monitor is using OgenGL to draw the soccer field. It seems, that > your X-Server configuration currently does not support this. The 'DRI' > [1], short for Direct Rendering Infrastructure must be supported. You > may try to install mesa3d [2], a software only renderer. Or a driver > directly supporting you 3D hardware. > > cheers, > Markus > > [1] http://dri.sourceforge.net/cgi-bin/moin.cgi/ > [2] http://www.mesa3d.org/ > > > ------------------------------------------------------- > SF.Net is sponsored by: Speed Start Your Linux Apps Now. > Build and deploy apps & Web services for Linux with > a free DVD software kit from IBM. Click Now! > http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click > _______________________________________________ > Sserver-three-d mailing list > Sse...@li... > https://lists.sourceforge.net/lists/listinfo/sserver-three-d > |