[Srtp-cvs] srtp/doc intro.txt,1.4,1.5

[Jonathan L. <jon...@us...>]

Update of /cvsroot/srtp/srtp/doc
In directory sfp-cvsdas-3.v30.ch3.sourceforge.com:/tmp/cvs-serv4593

Modified Files:
	intro.txt 
Log Message:
Apply documentation typo fixes submitted by Jaap Keuter.


Index: intro.txt
===================================================================
RCS file: /cvsroot/srtp/srtp/doc/intro.txt,v
retrieving revision 1.4
retrieving revision 1.5
diff -C2 -d -r1.4 -r1.5
*** intro.txt	30 Sep 2005 17:30:26 -0000	1.4
--- intro.txt	1 Jun 2010 18:26:12 -0000	1.5
***************
*** 6,13 ****
  from Cisco Systems, Inc.  RTP is the Real-time Transport Protocol, an
  IETF standard for the transport of real-time data such as telephony,
! audio, and video, defined by RFC1889.  Secure RTP (SRTP) is an RTP
  profile for providing confidentiality to RTP data and authentication
! to the RTP header and payload.  SRTP is an IETF Proposed Standard, and
! is defined in RFC 3711, and was developed in the IETF Audio/Video
  Transport (AVT) Working Group.  This library supports all of the
  mandatory features of SRTP, but not all of the optional features.  See
--- 6,13 ----
  from Cisco Systems, Inc.  RTP is the Real-time Transport Protocol, an
  IETF standard for the transport of real-time data such as telephony,
! audio, and video, defined by RFC 3550.  Secure RTP (SRTP) is an RTP
  profile for providing confidentiality to RTP data and authentication
! to the RTP header and payload.  SRTP is an IETF Proposed Standard,
! defined in RFC 3711, and was developed in the IETF Audio/Video
  Transport (AVT) Working Group.  This library supports all of the
  mandatory features of SRTP, but not all of the optional features.  See
***************
*** 111,115 ****
  \texttt{tar.gz}, and indicates a compressed tar file.}  You probably
  want to get the most recent release.  Unpack the distribution and
! extract the source files; the directory into which the soruce files
  will go is named \texttt{srtp}.
  
--- 111,115 ----
  \texttt{tar.gz}, and indicates a compressed tar file.}  You probably
  want to get the most recent release.  Unpack the distribution and
! extract the source files; the directory into which the source files
  will go is named \texttt{srtp}.
  
***************
*** 136,140 ****
  \end{quote}
  
! By default, dynamic debbuging is enabled and stdout is used for
  debugging.  You can use the configure options to have the debugging
  output sent to syslog or the system console.  Alternatively, you can
--- 136,140 ----
  \end{quote}
  
! By default, dynamic debugging is enabled and stdout is used for
  debugging.  You can use the configure options to have the debugging
  output sent to syslog or the system console.  Alternatively, you can
***************
*** 182,186 ****
  
  \texttt{rtpw [[-d $<$debug$>$]* [-k $<$key$>$ [-a][-e]] [-s | -r] dest\_ip
! dest\_port][-l]}
  
  Either the -s (sender) or -r (receiver) option must be chosen.  The
--- 182,186 ----
  
  \texttt{rtpw [[-d $<$debug$>$]* [-k $<$key$>$ [-a][-e]] [-s | -r] dest\_ip
! dest\_port] | [-l]}
  
  Either the -s (sender) or -r (receiver) option must be chosen.  The
***************
*** 190,194 ****
  \begin{tabular}{ll}
    -s		& (S)RTP sender - causes app to send words \\
!   -r		& (S)RTP receive - causes app to receve words \\
    -k $<$key$>$      & use SRTP master key $<$key$>$, where the 
  		key is a hexadecimal value (without the
--- 190,194 ----
  \begin{tabular}{ll}
    -s		& (S)RTP sender - causes app to send words \\
!   -r		& (S)RTP receive - causes app to receive words \\
    -k $<$key$>$      & use SRTP master key $<$key$>$, where the 
  		key is a hexadecimal value (without the
***************
*** 198,202 ****
    -a            & message authentication 
                  (requires use of -k option as well) \\
!   -l            & list the avaliable debug modules \\
    -d $<$debug$>$    & turn on debugging for module $<$debug$>$ \\
  \end{tabular}
--- 198,202 ----
    -a            & message authentication 
                  (requires use of -k option as well) \\
!   -l            & list the available debug modules \\
    -d $<$debug$>$    & turn on debugging for module $<$debug$>$ \\
  \end{tabular}
***************
*** 360,364 ****
  
     // allocate and initialize the SRTP session 
!    srtp_create(&session, policy);  
     
     // main loop: get rtp packets, send srtp packets
--- 360,364 ----
  
     // allocate and initialize the SRTP session 
!    srtp_create(&session, &policy);  
     
     // main loop: get rtp packets, send srtp packets