squirrelmail-plugins — SquirrelMail Plugins Mailing List

Re: [SM-PLUGINS] How to log in for the first time

[forge@c.icompute.com]

You need a mail server that supports IMAP. Squirelmail allows access to the email on that server.

-dgl-

> On Sep 1, 2024, at 3:40 PM, sadbh spam <sad...@gm...> wrote:
> 
> Hello,
> 
> I recently added the squirrel mail Version 1.4.22-11 plugin onto my wordpress website. However, I dont know how to register/create an account to log in. It simply brings me to a log in page and I cant figure out how to set it up. Any help would be appreciated! This is the screen I am faced with:
> 
> <Capture.JPG>
> 
> Thank you!
> -----
> squirrelmail-plugins mailing list
> Posting guidelines: http://squirrelmail.org/postingguidelines
> List address: squ...@li...
> List archives: http://news.gmane.org/gmane.mail.squirrelmail.plugins
> List info (subscribe/unsubscribe/change options): https://lists.sourceforge.net/lists/listinfo/squirrelmail-plugins

Re: [SM-PLUGINS] How to log in for the first time

[Paul L. <pa...@sq...>]

On Sun, September 1, 2024 8:40 pm, sadbh spam wrote:
> Hello,
>
> I recently added the squirrel mail Version 1.4.22-11 plugin onto my
> wordpress website. However, I dont know how to register/create an account
> to log in. It simply brings me to a log in page and I cant figure out how
> to set it up. Any help would be appreciated! This is the screen I am faced
> with:

SquirrelMail is an IMAP client. You need to have an IMAP server that it
can connect to and you use login credentials for the IMAP server to log in
to SquirrelMail. Maybe you have Dovecot or another IMAP server on your
system, but if not, that's where you need to start. Please read the
documentation on getting started in the Squirrelmail docs directory or on
our website.

-- 
Paul Lesniewski
SquirrelMail Team
Please support Open Source Software by donating to SquirrelMail!
http://squirrelmail.org/donate_paul_lesniewski.php

[SM-PLUGINS] How to log in for the first time

[sadbh s. <sad...@gm...>]

Hello,

I recently added the squirrel mail Version 1.4.22-11 plugin onto my
wordpress website. However, I dont know how to register/create an account
to log in. It simply brings me to a log in page and I cant figure out how
to set it up. Any help would be appreciated! This is the screen I am faced
with:

[image: Capture.JPG]

Thank you!

[SM-PLUGINS] Update of the unsafe_image_rules plugin for 1.5.x

[Tim D. <tad...@tp...>]

I have recently make appropriate changes to the unsafe_image_rules 
plugin to allow it to function with Squirrelmail 1.5.x.

How do I get this to you in order to help others who may be missing this 
plugin in 1.5?

Thanks,

- Tim

-- 
Tim Dawson

972-567-9360

Re: [SM-PLUGINS] Server Side Filter

[Matthew G. <ma...@ac...>]

Actually you are right there.

I never looked at the "Server Side Filter" plugin as according to the
https://squirrelmail.org/ site, it was last updated in 2004 so I went
for the 2009 Avesieve (and I also was after an easy to use sieve
interface not something that only worked in the client.)

The website has mislead me.


On 11/3/22 18:53, Paul Lesniewski wrote:
>
> On Thu, March 10, 2022 10:44 pm, Matthew Geier wrote:
>> It looks like the filters plugin is no longer maintained and is no
>> longer compatible with later PHP core releases.
>> My PHP skills were not where near able to fix it, so I gave up.
> There is no "filters" plugin, but if you are referring to "Server Side
> Filters" then yes, it is still maintained, although you may need to ask me
> offlist if you want more up-to-date code.
>
>> Our users now have to use https://protect-au.mimecast.com/s/iTy5CK1DvKT2RvBBPsMoNEI?domain=github.com
>>
>> They have it configured as both a Thunderbird plugin and a standalone
>> application.
>>
>> We were only using squirrelmail as an 'emergency' access to emails and
>> to set up vacation filters with the sieve filter plugin. Now the sieve
>> filter plugin no longer works.
> You're mixing up different plugins. Yes, I believe the "Avelsieve" plugin
> is not maintained any longer, but newer versions of the "Server Side
> Filters" plugin can be configured to create sieve rules including
> autoresponder functionality.
>
> Kind regards,

-- 
Matthew Geier
Systems Administrator
Australian Centre for Field Robotics, University of Sydney
Tel: +61 2 9351 8149

Re: [SM-PLUGINS] Server Side Filter

[Paul L. <pa...@sq...>]

On Thu, March 10, 2022 11:23 am, squ...@du... wrote:
> Hi List
>
> Hi list
>
> I can not find any combination of
>
> serversidefilter-1.42.tar
> server_side_filters-2.0beta1-1.4.0.tar
> server_settings_backend-1.0-1.4.0.tar
> server_settings_backend-2.0-1.4.0.tar
> compatibility-2.0.16-1.0.tar
>
> Which does not give "PHP Fatal error".

Please review the mailing list posting guidelines, which are linked at the
bottom of every list posting.  We need some indication of what the error
is you're trying to resolve.  Also make sure SquirrelMail works first
before you install any plugins.

> On the machine I have installed
> CentOS Linux release 7.9.2009,
> Qmailtoaster, http://www.qmailtoaster.net/#centos7
> with
> squirrelmail.noarch 1.4.23-1.el7.20190710
> and
> maildrop-devel.x86_64 2.9.1-2.qt.el7.
>
> What do I need to install to get SquirrelMail Server Side Filtering that
> works with Qmailtoaster and maildrop?
>
> Thanks in advance, for any advice that can binge me further.
>
> Regards,
> Allan
>
>
> -----
> squirrelmail-plugins mailing list
> Posting guidelines: http://squirrelmail.org/postingguidelines
> List address: squ...@li...
> List archives: http://news.gmane.org/gmane.mail.squirrelmail.plugins
> List info (subscribe/unsubscribe/change options):
> https://lists.sourceforge.net/lists/listinfo/squirrelmail-plugins
>

Re: [SM-PLUGINS] Server Side Filter

[Paul L. <pa...@sq...>]

On Thu, March 10, 2022 10:44 pm, Matthew Geier wrote:
> It looks like the filters plugin is no longer maintained and is no
> longer compatible with later PHP core releases.
> My PHP skills were not where near able to fix it, so I gave up.

There is no "filters" plugin, but if you are referring to "Server Side
Filters" then yes, it is still maintained, although you may need to ask me
offlist if you want more up-to-date code.

> Our users now have to use https://github.com/thsmi/sieve/
>
> They have it configured as both a Thunderbird plugin and a standalone
> application.
>
> We were only using squirrelmail as an 'emergency' access to emails and
> to set up vacation filters with the sieve filter plugin. Now the sieve
> filter plugin no longer works.

You're mixing up different plugins. Yes, I believe the "Avelsieve" plugin
is not maintained any longer, but newer versions of the "Server Side
Filters" plugin can be configured to create sieve rules including
autoresponder functionality.

Kind regards,
-- 
Paul Lesniewski
SquirrelMail Team
Please support Open Source Software by donating to SquirrelMail!
http://squirrelmail.org/donate_paul_lesniewski.php

Re: [SM-PLUGINS] Server Side Filter

[Matthew G. <ma...@ac...>]

It looks like the filters plugin is no longer maintained and is no 
longer compatible with later PHP core releases.
My PHP skills were not where near able to fix it, so I gave up.

Our users now have to use https://github.com/thsmi/sieve/

They have it configured as both a Thunderbird plugin and a standalone 
application.

We were only using squirrelmail as an 'emergency' access to emails and 
to set up vacation filters with the sieve filter plugin. Now the sieve 
filter plugin no longer works.



On 10/3/22 22:23, squirrelmailhttps://github.com/thsmi/sieve/@dukat.dk 
wrote:
> Hi List
>
> Hi list
>
> I can not find any combination of
>
> serversidefilter-1.42.tar
> server_side_filters-2.0beta1-1.4.0.tar
> server_settings_backend-1.0-1.4.0.tar
> server_settings_backend-2.0-1.4.0.tar
> compatibility-2.0.16-1.0.tar
>
> Which does not give "PHP Fatal error".
>
> On the machine I have installed
> CentOS Linux release 7.9.2009,
> Qmailtoaster, 
> https://protect-au.mimecast.com/s/bXnZCvl1rKi7Y32yziQ9_UC?domain=qmailtoaster.net
> with
> squirrelmail.noarch 1.4.23-1.el7.20190710
> and
> maildrop-devel.x86_64 2.9.1-2.qt.el7.
>
> What do I need to install to get SquirrelMail Server Side Filtering 
> that works with Qmailtoaster and maildrop?
>
> Thanks in advance, for any advice that can binge me further.
>
> Regards,
> Allan
>
>
> -----
> squirrelmail-plugins mailing list
> Posting guidelines: 
> https://protect-au.mimecast.com/s/ES4zCwV1vMfGqWAR3tqTXdB?domain=squirrelmail.org
> List address: squ...@li...
> List archives: 
> https://protect-au.mimecast.com/s/dRcSCxngwOf1739QoHYpQaQ?domain=news.gmane.org
> List info (subscribe/unsubscribe/change options): 
> https://protect-au.mimecast.com/s/R20PCyojxQTr8R0y5SRVOxT?domain=lists.sourceforge.net
>

-- 
Matthew Geier, Computer Systems Administrator
Australian Centre for Field Robotics
Rose St Bld, J04
Ph: +61 2 9351 8149

[SM-PLUGINS] Server Side Filter

[<squ...@du...>]

Hi List

Hi list

I can not find any combination of

serversidefilter-1.42.tar
server_side_filters-2.0beta1-1.4.0.tar
server_settings_backend-1.0-1.4.0.tar
server_settings_backend-2.0-1.4.0.tar
compatibility-2.0.16-1.0.tar

Which does not give "PHP Fatal error".

On the machine I have installed
CentOS Linux release 7.9.2009,
Qmailtoaster, http://www.qmailtoaster.net/#centos7
with
squirrelmail.noarch 1.4.23-1.el7.20190710
and
maildrop-devel.x86_64 2.9.1-2.qt.el7.

What do I need to install to get SquirrelMail Server Side Filtering that 
works with Qmailtoaster and maildrop?

Thanks in advance, for any advice that can binge me further.

Regards,
Allan

Re: [SM-PLUGINS] CardDAV Addressbook plugin

[Alexey S. <al...@sh...>]

On Mon, June 7, 2021 05:32, Paul Lesniewski wrote:
> On Tue, June 1, 2021 7:56 pm, Alexey Shpakovsky via squirrelmail-plugins
wrote:
>> It looks like there are only three of us interested in this plugin,

> On mailing lists there are always people reading but not responding, or
people who may see your posts at a later date, which makes it valuable to
have such conversations here.

Sounds reasonable! Then let me paste here (slightly amended) email which I
sent privately.


First, few notes on compatibility:
---------------------------------

* The carddavclient library that this plugin is using requires something
like php 7.1 or 7.4, and I doubt I can decrease its requirements :)

* I'm currently using and testing this plugin in SquirrelMail 1.2.23 SVN
(recent snapshot), but it should be easy to adapt to other versions, if
someone finds a compatibility issue.


Then, my biggest question:
-------------------------

What are your opinions about mapping of vcard fields (name, org, title,
notes, address, phone, etc - there are plenty of them) to SquirrelMail
address book fields (name, nickname, info)?

Note that SquirrelMail uses "nickname" field as unique key to identify
address book entries when editing/deleting them: when user clicks a button
to delete an address, SquirrelMail tells addressbook backend: "please
delete user with this nickname". For CardDAV servers, such unique keys are
otherwise meaningless URIs.

Also SquirrelMail supports only one email address per contact, while vcard
can have multiple.

So I came up with this otherwise strange idea: add an option (checkbox)
whether addressbook is writeable, and make field contents depend on it:

* when addressbook is in read-only mode, "nickname" field in SquirrelMail
shows content of "organisation" field in vcard.

* when addressbook is write-enabled, "nickname" field contains vcard URI,
and "info" field contains value of "organisation" field from vcard (which
you actually can edit).

Moreover, when addressbook is in read-only mode, each vcard is repeated as
many times as there are email addresses in it, and also "info" field has
different phone numbers (but you can't edit them).

Sounds messy, but works nice in my case :)

I of course would like to hear other opinions: how do __you__ think it
should be done or how would you like to see it?


Installation instructions:
-------------------------

Described in the repo readme, but TL;DR version is:

* download or clone that repo

* extract it into "abook_carddav" subdir in your plugins directory

* open "discover" page at
{your.squirrelmail.installation}/plugins/abook_carddav/discover.php - for
example, if your main squirrelmail page URL looks like this:
https://mail.example.com/src/webmail.php
then URL of the "discover" page is this:
https://mail.example.com/plugins/abook_carddav/discover.php

* If everything goes well, it should show you a form with three fields.
Exact content of first one depends on your CardDAV server setup, but in
some cases it's enough to provide just hostname, in other cases you can
provide full URL to dav endpoint - for example, in case of Baikal server
running on https://baikal.example.com:8000/, discovery URL is
https://baikal.example.com:8000/dav.php . Valid username and password are
required to find addressbooks available to a specific user.

* after submitting that form, scroll to the very bottom. If you see a
number greater than 0 after "Addressbooks discovered:" - you're lucky :)

In my case, I have this:

Addressbooks discovered: 1
* Name: Default addressbook
  Addressbook URI:
https://baikal.example.com:8000/dav.php/addressbooks/alexey/default/
  Base URL: https://baikal.example.com:8000

(where "default" is addressbook name)

* After that, enable the plugin if you haven't done so yet, and enter
Addressbook URI together with Base URL and you username/password into
relevant fields at the bottom of Options - Display Preferences page.


Note about password storage:
---------------------------

This plugin has three options regarding password storage:

* use same password for CardDav account as for IMAP (usually it's the
password you enter to login to SquirrelMail) - obviously it's the best
option from the password storage point of view, but only if your CardDav
and IMAP accounts have the same password (note that usernames might
differ).

* _encrypt_ your CardDav password using your IMAP password - probably the
best option in all other cases, but remember that you will have to
re-enter your CardDav password (for it to be re-encrypted) in case your
IMAP password changes. _Encryption_ used here is basically XORing CardDav
password with sha256 checksum of IMAP password and storing the result.

* No encryption, CardDav password is stored in your prefs file in plain text.


Obviously, in last case if someone gets hold of your prefs file (malicious
server admin, php script, or via backups) - they can read your CardDav
password from it.

In second case, in addition to copy of your prefs file, they need to know
your IMAP password - and then they can find out your CardDav password.

If anyone has a better (more secure) idea of password storage - please let
me know!


Also, when user switches from first option ("use IMAP password") to last
one ("store password in plaintext") - their IMAP password appears in prefs
file in plain text. Fixing this is first item on my list.


Some more notes:
---------------

* Currently, CardDav server/account is configured by each user
individually, although it should be pretty easy to add an option of
admin-specified "global" or per-user CardDav server/account.

* Also, it should be pretty simple to implement multiple CardDav address
books (just call add_account function multiple times with different
arguments), but I don't have good idea how to implement it UI-wise.


Thoughts, comments?

Alexey.

Re: [SM-PLUGINS] CardDAV Addressbook plugin

[Paul L. <pa...@sq...>]

On Tue, June 1, 2021 7:56 pm, Alexey Shpakovsky via squirrelmail-plugins
wrote:
> On Sat, May 29, 2021 16:35, tlhackque via squirrelmail-plugins wrote:
>> I might try it, but it's not a high priority.
>
> It looks like there are only three of us interested in this plugin,

On mailing lists there are always people reading but not responding, or
people who may see your posts at a later date, which makes it valuable to
have such conversations here.

> so I suggest let's take it off-list. I'll contact you and Ted privately. If
> someone else want to join - let me know or check this repo:

I don't see any reason why having a private conversation is any more
useful, whereas you always have the ability to get feedback at any point
in the conversation from more people if you talk in public.

Cheers,
-- 
Paul Lesniewski
SquirrelMail Team
Please support Open Source Software by donating to SquirrelMail!
http://squirrelmail.org/donate_paul_lesniewski.php

Re: [SM-PLUGINS] CardDAV Addressbook plugin

[Alexey S. <al...@sh...>]

On Sat, May 29, 2021 16:35, tlhackque via squirrelmail-plugins wrote:
> I might try it, but it's not a high priority.

It looks like there are only three of us interested in this plugin, so I
suggest let's take it off-list. I'll contact you and Ted privately. If
someone else want to join - let me know or check this repo:
https://github.com/Lex-2008/abook_carddav - I'll try to keep readme up to
date as long as repo is maintained.



> FWIW, my cardDAV address books (I have more than one) each run
> several hundred addresses, so address completion (full and/or
> partial) is pretty much required for it to be useful. ​Also,
> squirrelmail seems to be used as lightweight MUA, especially
> where bandwidth is limited and/or expensive.  So listing "all"
> and/or generating a lot of client traffic should be avoided.  Better to
send the server a partial name and get back only matches.

Agreed! I assume you mean "autocomplete" plugin? It indeed has two modes
of operation: "Pre-load Contacts" (insert your whole addressbook into
"compose" page) or send a request to server after each typed character.

Although in my case (single hundred addresses) it takes almost same time
to load "compose" page with whole address book (~600ms) as to find a
single matching entry for a typed email address (~500ms). So preloading it
is for me, then :)



> "carddavclient" mentions a local cache - if this is in the
> squirrelmail browser, you need to consider how the end user can
> flush it/ensure it disappears - e.g. when a shared/public PC is used.

No, I believe it's to synchronize CardDAV and squirrelmail servers. I
haven't figured out how it works exactly (carddavclient doesn't have API
to save/load the cache), and it sounds like an idea for a different plugin
- which will just synchronize squirrelmail addressbook with a remote one.

This plugin just proxies requests from squirrelmail ("give me all contacts
whose name starts with A") to CardDAV server.



> There's likely to be a lot of effort required between "works for me"
> and "others can use in production"...

Agreed. And it looks like there are not that many people eager to run it
in production, so guess I won't be putting too much effort in moving it
too far from "works for me" state.

Alexey

Re: [SM-PLUGINS] CardDAV Addressbook plugin

[Ted H. <te...@io...>]

On Sat, 29 May 2021, Alexey Shpakovsky via squirrelmail-plugins wrote:

> Hi all,
>
> I'm developing a plugin which lets SquirrelMail use CardDAV server as an
> addressbook backend. It's based on
> https://github.com/mstilkerich/carddavclient and for now I'm just copying
> code from its quickstart.php example script into the "Address book backend
> template" SquirrelMail plugin.
>
> As of today, listing of all addresses and adding new ones works, so it can
> be used in a "read-and-append-only" mode (editing and deleting existing
> entries not implemented yet). Code is at
> https://github.com/Lex-2008/abook_carddav
>
> My main question is: does anyone else feel interested in using this plugin
> or am I doing it only for myself? If if will have any other users - I will
> add some user-visible options, otherwise they all will be hardcoded.
>
> Thanks,
> Alexey.
>
>
>
>

Despite what others might say I would be interested in a cardDAV plugin.

Ted.

Re: [SM-PLUGINS] CardDAV Addressbook plugin

[Alexey S. <al...@sh...>]

On Sat, May 29, 2021 18:26, Alan in Toronto wrote:
> On Sat, May 29, 2021 6:26 am, Alexey Shpakovsky via squirrelmail-plugins
> wrote:
>> Hi all,
>>
>> I'm developing a plugin which lets SquirrelMail use CardDAV server as an
>> addressbook backend. It's based on
>
> At one time I might have been interested. I've worked with others on
> development of
> a couple of plugins "back in the day".
>
> Nowadays, SquirrelMail is virtually dead. Its user base is almost gone as
> large
> installations have moved on to newer mail clients that are in active
> development.
> There hasn't been an official stable release in ten years, raising
> questions about
> security. Most people don't want such an old client, especially given
> potential
> security issues.

While I agree with you, to be completely fair to Paul it worth noting that
there were almost 50 commits this year, according to
https://sourceforge.net/p/squirrelmail/code/commit_browser

And yes, for some (at least for me) it feels much faster/snappier than
other webmail clients that I looked into, and almost as fast as desktop
mail clients (except synchronization phase when you just need to wait
until Thunderbird crunches through all your emails).


> It was a terrific tool at one time, but its time has passed,
> unfortunately. Still,
> if it serves your needs, then that's great. Just don't be surprised if you
> end up
> coding this plugin just for yourself. Good luck.

Thanks for the warm words, Alan! And no problem, it's not the first plugin
I'm coding for myself only :)

Alexey.

Re: [SM-PLUGINS] CardDAV Addressbook plugin

[Alan in T. <squ...@fi...>]

On Sat, May 29, 2021 6:26 am, Alexey Shpakovsky via squirrelmail-plugins wrote:
> Hi all,
>
> I'm developing a plugin which lets SquirrelMail use CardDAV server as an
> addressbook backend. It's based on

At one time I might have been interested. I've worked with others on development of
a couple of plugins "back in the day".

Nowadays, SquirrelMail is virtually dead. Its user base is almost gone as large
installations have moved on to newer mail clients that are in active development.
There hasn't been an official stable release in ten years, raising questions about
security. Most people don't want such an old client, especially given potential
security issues.

It was a terrific tool at one time, but its time has passed, unfortunately. Still,
if it serves your needs, then that's great. Just don't be surprised if you end up
coding this plugin just for yourself. Good luck.

Re: [SM-PLUGINS] CardDAV Addressbook plugin

[tlhackque <tlh...@ya...>]

On 29-May-21 06:26, Alexey Shpakovsky wrote:

> My main question is: does anyone else feel interested in using this plugin
> or am I doing it only for myself? If if will have any other users - I will
> add some user-visible options, otherwise they all will be hardcoded.
>
> Thanks,
> Alexey.
>
I might try it, but it's not a high priority.  This list is not very
active - there were 6 posts last year and 2 in 2019.

Not sure where you might get a wider audience; -devel is also quiet. 

FWIW, my cardDAV address books (I have more than one) each run several
hundred addresses, so address completion (full and/or partial) is pretty
much required for it to be useful.  Also, squirrelmail seems to be used
as lightweight MUA, especially where bandwidth is limited and/or
expensive.  So listing "all" and/or generating a lot of client traffic
should be avoided.  Better to send the server a partial name and get
back only matches. "carddavclient" mentions a local cache - if this is
in the squirrelmail browser, you need to consider how the end user can
flush it/ensure it disappears - e.g. when a shared/public PC is used.

There's likely to be a lot of effort required between "works for me" and
"others can use in production"...

[SM-PLUGINS] CardDAV Addressbook plugin

[Alexey S. <al...@sh...>]

Hi all,

I'm developing a plugin which lets SquirrelMail use CardDAV server as an
addressbook backend. It's based on
https://github.com/mstilkerich/carddavclient and for now I'm just copying
code from its quickstart.php example script into the "Address book backend
template" SquirrelMail plugin.

As of today, listing of all addresses and adding new ones works, so it can
be used in a "read-and-append-only" mode (editing and deleting existing
entries not implemented yet). Code is at
https://github.com/Lex-2008/abook_carddav

My main question is: does anyone else feel interested in using this plugin
or am I doing it only for myself? If if will have any other users - I will
add some user-visible options, otherwise they all will be hardcoded.

Thanks,
Alexey.

Re: [SM-PLUGINS] Shadowroot plugin to avoid CSS from HTML mails styling your UI

[Paul L. <pa...@sq...>]

Alexey,

>>> Under SquirrelMail 1.4.22, CSS styles in HTML mail might affect whole
>>> message window, usually making it look horrible:
>>>
>>> http://alexey.shpakovsky.ru/unlisted/shadowroot-before.png
>>>
>>
>> However, this is vastly different (mostly solved) in newer versions of
>> SquirrelMail.
>>
>>
>>> Provided plugin uses "shadowroot" feature of modern browsers, which
>>> with help of 6 lines of javascript confines CSS styles to content of
>>> message itself, making message look much better:
>>>
>>> http://alexey.shpakovsky.ru/unlisted/shadowroot-after.png
>>>
>>>
>>> Note that it requires enabled javascript and a fairly recent browser.
>>> Achieving similar effect without javascript would be possible by
>>> loading
>>>  contents of mail message within iframe, but that would be much bigger
>>> change :)
>>>
>>> Plugin is for SquirrelMail 1.4 only. Download link:
>>>
>>>
>>> http://alexey.shpakovsky.ru/unlisted/shadowroot.tar.gz
>>>
>>>
>>> Please let me know what you think.
>>>
>>
>> Thanks for your interest in trying to solve this problem.  I'd suggest
>> you test with version 1.4.23-svn or 1.5.2 and see if your email is
>> presented as expected since no JavaScript fix is necessary.
>>
>
> Thanks for the answer! Indeed, I see the issue is resolved in 1.5.2. Time
> to upgrade.

1.4.23-svn also has this fix.

> However, I see a room for improvement: with help of 2 or 3 lines of
> javascript it's possible to make iframe height equal to its contents, thus
> making scrolling and reading of long emails more pleasant. Do you think it
> worth making a plugin or adding to Squirrelmail core?

We'd be happy to take a look and see. Remember that JavaScript always has
to be optional in SquirrelMail.

-- 
Paul Lesniewski
SquirrelMail Team
Please support Open Source Software by donating to SquirrelMail!
http://squirrelmail.org/donate_paul_lesniewski.php

[SM-PLUGINS] Folder Synch plugin compatible with 1.5.2

[Alexey S. <al...@sh...>]

Hi all,

I've added last missing pieces to Folder Synch plugin to make it
compatible with SquirrelMail version 1.5.2.

If someone needs it, you can download it here:

http://alexey.shpakovsky.ru/unlisted/folder_synch.tar.gz

It even works with Preview Pane plugin, although not ideal.

Alexey.

Re: [SM-PLUGINS] Shadowroot plugin to avoid CSS from HTML mails styling your UI

[Alexey S. <al...@sh...>]

Hi Paul,

On Thu, July 16, 2020 11:23 pm, Paul Lesniewski wrote:
> Hi Alexey,
>
>
> On Thu, July 16, 2020 4:58 pm, Alexey Shpakovsky via squirrelmail-plugins
>  wrote:
>
>> Hi all,
>>
>>
>> Under SquirrelMail 1.4.22, CSS styles in HTML mail might affect whole
>> message window, usually making it look horrible:
>>
>> http://alexey.shpakovsky.ru/unlisted/shadowroot-before.png
>>
>
> However, this is vastly different (mostly solved) in newer versions of
> SquirrelMail.
>
>
>> Provided plugin uses "shadowroot" feature of modern browsers, which
>> with help of 6 lines of javascript confines CSS styles to content of
>> message itself, making message look much better:
>>
>> http://alexey.shpakovsky.ru/unlisted/shadowroot-after.png
>>
>>
>> Note that it requires enabled javascript and a fairly recent browser.
>> Achieving similar effect without javascript would be possible by loading
>>  contents of mail message within iframe, but that would be much bigger
>> change :)
>>
>> Plugin is for SquirrelMail 1.4 only. Download link:
>>
>>
>> http://alexey.shpakovsky.ru/unlisted/shadowroot.tar.gz
>>
>>
>> Please let me know what you think.
>>
>
> Thanks for your interest in trying to solve this problem.  I'd suggest
> you test with version 1.4.23-svn or 1.5.2 and see if your email is
> presented as expected since no JavaScript fix is necessary.
>

Thanks for the answer! Indeed, I see the issue is resolved in 1.5.2. Time
to upgrade.

However, I see a room for improvement: with help of 2 or 3 lines of
javascript it's possible to make iframe height equal to its contents, thus
making scrolling and reading of long emails more pleasant. Do you think it
worth making a plugin or adding to Squirrelmail core?

Alexey.

Re: [SM-PLUGINS] Shadowroot plugin to avoid CSS from HTML mails styling your UI

[Paul L. <pa...@sq...>]

Hi Alexey,

On Thu, July 16, 2020 4:58 pm, Alexey Shpakovsky via squirrelmail-plugins
wrote:
> Hi all,
>
> Under SquirrelMail 1.4.22, CSS styles in HTML mail might affect whole
> message window, usually making it look horrible:
>
> http://alexey.shpakovsky.ru/unlisted/shadowroot-before.png

However, this is vastly different (mostly solved) in newer versions of
SquirrelMail.

> Provided plugin uses "shadowroot" feature of modern browsers, which with
> help of 6 lines of javascript confines CSS styles to content of message
> itself, making message look much better:
>
> http://alexey.shpakovsky.ru/unlisted/shadowroot-after.png
>
> Note that it requires enabled javascript and a fairly recent browser.
> Achieving similar effect without javascript would be possible by loading
> contents of mail message within iframe, but that would be much bigger
> change :)
>
> Plugin is for SquirrelMail 1.4 only. Download link:
>
> http://alexey.shpakovsky.ru/unlisted/shadowroot.tar.gz
>
> Please let me know what you think.

Thanks for your interest in trying to solve this problem.  I'd suggest you
test with version 1.4.23-svn or 1.5.2 and see if your email is presented
as expected since no JavaScript fix is necessary.

-- 
Paul Lesniewski
SquirrelMail Team
Please support Open Source Software by donating to SquirrelMail!
http://squirrelmail.org/donate_paul_lesniewski.php

[SM-PLUGINS] Shadowroot plugin to avoid CSS from HTML mails styling your UI

[Alexey S. <al...@sh...>]

Hi all,

Under SquirrelMail 1.4.22, CSS styles in HTML mail might affect whole
message window, usually making it look horrible:

http://alexey.shpakovsky.ru/unlisted/shadowroot-before.png

Provided plugin uses "shadowroot" feature of modern browsers, which with
help of 6 lines of javascript confines CSS styles to content of message
itself, making message look much better:

http://alexey.shpakovsky.ru/unlisted/shadowroot-after.png

Note that it requires enabled javascript and a fairly recent browser.
Achieving similar effect without javascript would be possible by loading
contents of mail message within iframe, but that would be much bigger
change :)

Plugin is for SquirrelMail 1.4 only. Download link:

http://alexey.shpakovsky.ru/unlisted/shadowroot.tar.gz

Please let me know what you think.

Alexey.

[SM-PLUGINS] Archive Mail plugin 'adopted'

[John D. S. <jo...@ho...>]

Please change the world writable directories in the tar file.

Recently someone succeeded to place PHP malware in those directories on 
my server.

drwxrwxrwx advcs/advcs       0 2004-04-09 16:21 archive_mail/
drwxrwxrwx advcs/advcs       0 2003-10-17 20:30 archive_mail/includes/

Thanks

John

[SM-PLUGINS] Archive Mail plugin 'adopted' (second post)

[Prof. M. G. <mic...@li...>]

Hello all!

I realize I might sound old dated, but I recently took the matter of
updating the old Archive Mail plugin (originally by Jimmy Conner) in my hands,
and I think I am almost finished. The plugin works well under SM 1.5.2 SVN,
which I am currently running in my school.

Some parts of the code are certainly quite obsolete (especially the
compression and format stuff), but, like they say 'don't fix it if it ain't
broken', and as a matter of fact it's working as it is.

I introduced a limit on the number of files that can be archived (only 500 to
avoid the plugin to consume all or almost the server resources).

I do not certainly claim that my work is done: the plugin is not backward
comptible with "stable" 1.4.x, but I could use some help to polish it out and
finish it.

If anyone is interested, I'd love to share the new code I wrote,
and I am quit open to the idea of a renewal of the compression code, which is,
like I said, pretty rough.

Thank you all in advance for your attention.

M.G.

P.S.: I apologize for the double posting. It was the result of the unhappy
attempt to adapt the html_mail plugin to work with SM 1.5.2 ;-)

[SM-PLUGINS] Archive Mail plugin 'adopted'

[Prof. M. G. <mic...@li...>]

Hello all!


I realize I might sound old dated, but I recently took the matter of
updating the old Archive Mail plugin originally by Jimmy

Conner in my hands, and I think I am almost finished. The plugins works well
under SM 1.5.2 SVN, which I am

currently running in my school.

Some parts of the code are certainly quite obsolete (especially the
compression and format stuff, but, like

they say 'fix it if it ain't working', and as a matter of fact
it's working as it is.

I introduced a limit on th number of files that can be archived (only 500 to
avoid the plugin to consume

all or almost the server resources).

I do not certainly claim that my work is done: the plugin is not backward
comptible with "stable" 1.4.x,

but I could use some help to polish it out and finish it.

If anyone is interested, I'd love to share the new code I wrote,

and I am quit open to the idea of a renewal of the compression code, which is,
like I said,

pretty rough.

Thank you all in advance for your attention.

M.G.