RE: [Springframework-developer] jpetstore upgraded to iBatis 2.0

[Alef A. <al...@jt...>]

The jpetstore autobuilds version is automatically build during the
nightly build, so you could give it a try without too much effort. Also,
if you need more intermediary builds (to test jpetstore with autobuilds
for example), just ping me and I'll trigger the build...

Alef


> -----Original Message-----
> From: spr...@li...=20
> [mailto:spr...@li...]
>  On Behalf Of Colin Sampaleanu
> Sent: Tuesday, January 04, 2005 7:16 PM
> To: spr...@li...
> Subject: [Springframework-developer] jpetstore upgraded to iBatis 2.0
>=20
> I spent some time and upgraded jpetstore to use iBatis 2.0=20
> instead of 1.0 like it was using. It was incredibly tedious=20
> since almost every element in the mapping files had to be=20
> renamed, but on the other hand the conversion was very=20
> straightforward, with essentailly a one-to-one conversion=20
> from old to new, so I hope I didn't break anything. It seems=20
> to work ok, but if anybody else has 5 minutes to pull it out=20
> and play around with it a bit to try to catch any breakage,=20
> that would be good.
>=20
> We'll have to update the jpetstore under autobuilds too. I'm=20
> not clear if that's modified at all from the original. If=20
> not, the changed files can just be copied over.
>=20
> Colin
>=20
>=20
>=20
> -------------------------------------------------------
> The SF.Net email is sponsored by: Beat the post-holiday blues=20
> Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
> It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
> _______________________________________________
> Springframework-developer mailing list
> Spr...@li...
> https://lists.sourceforge.net/lists/listinfo/springframework-developer
>=20
>=20
>=20
>=20